Four-sided jointer and planer S16F-1 is designed for four-sided planar and profile gouging of boards, bars and for jointing of base planes.
Profile work can be performed with side and top cutters.
The stepless regulation of the material feed rate makes it possible to integrate it into automatic lines.
Jointing and planing machine S16-F1 has four working spindles arranged in the following order: lower horizontal; right vertical; left vertical; top horizontal.
All milling cutters have steel protective casings, which are also chip receivers and are adapted for connection to the shop exhauster network.
The planing and planing machine consists of the following main units. The machine bed is a box-shaped casting, on which all calipers and feed mechanisms are installed. The feed hydraulic drive is used to communicate the feed mechanism of various speeds. The feed mechanism gives the workpieces translational motion along the machine. The workpieces being machined are pressed against the machine table and against the guide rail with the help of spring-loaded rollers, which prevents the workpieces from shifting and ensures reliable basing in the cutting zone. To prevent the material from being thrown back during processing, a claw guard is installed on the machine from the loading side.
At the request of the consumer, a common fence can be installed on the jointer-planer. The machine controls are located on the front side of the bed in places convenient for use.
Machine Features
The presence of a variator drive provides smooth regulation of the feed rate within 6-45 m/min.
The use of milling cutters with high-quality sharpening of cutting knives makes it possible to obtain clean wood processing, excluding subsequent grinding.
Easy to set up and reliable in operation.
Cast iron cast bed.
Jointing and planing machine S16-F1 Specifications
Processed material dimensions, mm
length, smallest, no more
milling 400
jointing 600
width, smallest, no more
milling 30
jointing 50
width, maximum, not less than 160
thickness, smallest, no more
milling 10
jointing 40
thickness, maximum, not less than 80
The largest diameter of cutters mounted on spindles, mm 180
Number of milling heads, pcs 4
Material feed rate, m/min 6-45
Frequency of rotation of cutter heads, rpm 5000
Overall dimensions, mm, without guardrail
width 1435
height 1630
Weight, kg, without guard, no more than 4595
Four-sided machines are designed for the production of various molded products. On these machines, the workpiece is processed from four sides in one pass. The machine is equipped with four milling spindles.
The machine uses a dispersed type feed mechanism with upper and lower drive rollers. The upper feed rollers with “wolf tooth” corrugation provide reliable broaching of any workpieces, including workpieces of natural moisture. Mechanical hold-downs of the upper feed rollers provide a uniform force and smooth passage of the workpiece through the cutting zones, and also allow you to work at low temperatures. The drive of the lower rollers uses cardan gears that do not require maintenance. The front and rear clamps completely eliminate "tear-outs" at the entry and exit of the workpiece from the cutting zone and are equipped with a guide element that ensures their precise location and ease of adjustment.
Design features
The cast bed made of high-strength cast iron provides exclusive rigidity and reliability of the machine, reduces vibrations to a minimum. | |
The long front infeed table improves the quality and precision of the workpieces being machined. | |
The electrical cabinet and control panel are equipped with modern equipment. | |
The front clamps (sectional type) and the rear clamps are adjustable for the size of the processing, completely eliminate the "tear-outs" at the entry and exit of the workpiece. | |
For processing workpieces with high humidity, the upper feed rollers are made with "wolf tooth" corrugation | |
The task of facilitating the passage of the workpiece through the cutting zone and the removal of resin and dust from the surface of the tables is solved by the lubrication system. | |
The spindle positioning system is mounted on the front panel of the machine. For ease of operation, the mechanisms are equipped with digital indicators with an accuracy of 0.1 mm, which facilitates adjustment and control. |
|
The feed rate change is stepless, provided by a variator. This guarantees a smooth and constant feed of workpieces during processing. Torque is transmitted to the lower feed rollers using cardan shafts. |
Basic equipment of the machine
Designation and name | Quantity | Purpose |
С16-1А.00.028 Sleeve | 5 | Ability to process narrow workpieces. They are installed instead of the left row of feed gear rollers in the direction of the workpiece movement. |
IP.17.000 Key | 1 | Tightening and loosening the nut fixing the tool on the spindle. |
IP.36.000 Set of rings | 2 | Spacers on spindle shafts for the possibility of installing wood-cutting tools of various lengths. |
DIN468-160-V17 Handle | 1 | Movement of calipers in the horizontal and vertical direction. Loosening and tightening the locking screws. |
Replacement parts and accessories ordered as options
upon request and at an additional cost
The aspiration system is purchased at the rate of 1200 cubic meters per hour per machine support.
C16-1A
Four-sided planer C16-1A.
Model: С26-1А (Borovichi Shipyard) sold, price______ rub.
Designed for the production of lining, floorboards, planed timber, trim, plinth and other shaped moldings from edged boards or timber in industrial volumes (up to 2.5 m3/hour). Workpieces are processed simultaneously from 4 sides in one pass with a constant supply of material throughout the entire processing zone. All supports and a front table are located on the machine bed, which serves to base the workpiece before processing it and to establish the amount of material removal along the bottom face of the workpiece. Steel overhead tables and guide lines are attached to the upper plane of the bed, along which the workpieces move. In the direction of material feed, the cutting heads are arranged in the following order:
- lower horizontal
- right vertical
- left vertical
- upper horizontal
An extended front table, an improved design of the side clamps allow the workpiece to be reliably based, and a distributed type of feed mechanism with drive rollers ensures its reliable movement. Rollers installed along the entire length of the machine do not allow slippage of the material.
The speed of movement of the workpiece is regulated by a variator.
Specifications C16-1A:
Processed material dimensions, mm | width | 30-160 |
---|---|---|
thickness | 8-100 | |
shortest length | 400 | |
Feed speed, m/min | 8-45 | |
Number of spindles | 4 | |
Rotation frequency of cutters, rpm | 6000 | |
Mill diameter, mm | cylindrical | 140 |
specialized | 140-180 | |
Total power of electric motors, kW | 29,8 | |
Overall dimensions, mm | 3460x1170x1800 | |
Weight, kg | 4000 |
Four-sided machine model c16-42(light series, four-spindle machine) model is designed for the production of various molded products. On this machine, the workpiece is processed from four sides in one pass. The machine is equipped with four milling spindles.
The machine uses a dispersed type feed mechanism with upper and lower drive rollers.
Top feed rollers with “wolf tooth” corrugation provide reliable broach of any blanks, including blanks of natural moisture.
Mechanical hold-downs of the upper feed rollers provide a uniform force and smooth passage of the workpiece through the cutting zones, and also allow you to work at low temperatures.
The drive of the lower rollers uses cardan gears that do not require maintenance.
The front and rear clamps completely eliminate "tear-outs" at the entry and exit of the workpiece from the cutting zone and are equipped with a guide element that ensures their precise location and ease of adjustment.
Technical characteristics of the four-sided machine C16-42 | Options |
Processing width, mm | 30-160 |
Processing height, mm | 10-100 |
The minimum length of the workpiece when processing in the stream, mm | 400 |
Minimum length of a single workpiece, mm | 700 |
Maximum allowance for machining with cylindrical cutters, mm: | |
- for bottom cutter | 5 |
- for top and vertical | 8 |
Number of spindles, pcs | 4 |
Spindle speed, rpm | 6000 |
Landing dimensions of horizontal spindles, length x diameter, mm | 170x40h6 |
Mounting dimensions of vertical spindles, length x diameter, mm | 110x40h6 |
Diameter of vertical profile cutters, mm | 110-160 |
Diameter of the upper horizontal profile cutter, mm | 110-160 |
Diameter of cylindrical cutters, mm (it is possible to install a cutter max O144mm on the lower spindle) | 125-140 |
Feed rate (two ranges, adjustable by frequency converter), m/min | 3…14; 6…26 |
Machine weight, kg, no more | 2000 |
Machine dimensions, length x width x height, mm | 2455 x 1250 x 1400 |
Technical characteristics of electrical equipment | ||
Name of parameters | Machine model and parameters | |
С16-2.00.000 | С16-42.01.000 | |
Type of supply current | Variable, three-phase | |
Current frequency, Hz | 50 | |
Voltage, V | 380 | |
Number of electric motors on the machine, pcs. | 5 | |
Electric cutter drive motors: | ||
bottom, right, left, kW | 4,0 | 4,0 |
top, kW | 4,0 | 7,5 |
rotation frequency, rpm. | 3000 | |
E / feed drive motors: | ||
quantity, pcs. | 1 | |
power, kWt | 1,5 | |
rotation frequency, rpm. | 930 | |
Total power of all electric motors, kW | 17,5 | 21 |
The basic equipment of the machine includes: | ||
Designation and name | Quantity | Purpose |
С16-1А.00.028 Sleeve | 5 | Ability to process narrow workpieces. They are installed instead of the left row of feed gear rollers in the direction of the workpiece movement. |
IP.17.000 Key | 1 | Tightening and loosening the nut fixing the tool on the spindle. |
IP.36.000 Set of rings | 2 | Spacers on spindle shafts for the possibility of installing wood-cutting tools of various lengths. |
DIN468-160-V17 Handle | 1 | Movement of calipers in the horizontal and vertical direction. Loosening and tightening the locking screws. |
Replacement parts and accessories ordered as an option (upon request and at an additional cost) | ||
Designation and name | Quantity | Purpose |
Vibration support OV-31M | 4 | Installation of the machine on the foundation. |
wooden box | 1 | For machine packing. |
The range and quantity of wood-cutting tools supplied with the machine is determined according to the supply agreement (including cylindrical cutters). |
C16-51. Five milling spindle machine heavy series.
The S16-51 woodworking longitudinal milling machine is designed for flat and profile processing of lumber (bars, boards, etc.) from 4 sides in one pass.
Attention!This equipment has been discontinued! You can check the exact price and production time with our managers.
Features of the 4-sided machine C16-51Profile work can be carried out with side, top and moulder cutters. Saws can be mounted on the moulder spindle to divide the material to be cut in width. The caliper has the ability to work both in the lower and upper position. The long front table improves the quality of workpiece processing. All mechanisms of the machine are installed on a cast frame. The feed mechanism of the machine is a dispersed type with upper and lower drive feed rollers.
- The material of the bed is cast iron.
- Control system - manual with automatic feed.
- The machine is equipped with safety devices and interlocks.
- The feed mechanism is of a dispersed type, has upper and lower rollers.
- Spindles: 1-bottom, 2-right, 3-left, 4-top, 5-top/bottom.
- Spindle 5 has an additional support.
- Profile cutters are installed on all spindles, except for the lower one.
- The equipment is certified.
Replacement parts and accessories*, ordered as an option (upon request and at an additional cost).
* - the range and quantity of wood cutting tools supplied with the machine is determined according to the supply contract (including cylindrical milling cutters).
Recommended to purchase additional- Soundproof fence. Protection of personnel from noise vibrations - 1 pc.
- Pneumatic clamping system. Simplification of pressure force adjustment of pressure rollers - 1 set.
- Digital reading devices for adjusting to the processing size - 1 pc.
Specifications | С16-51 |
Workpiece dimensions, mm | |
Processing width | 32-160 |
Processing height | 12-125 |
Minimum workpiece length for in-line processing | 250 |
Minimum length of a single piece | 700 |
The maximum thickness of the workpiece for longitudinal sawing, mm | 50 |
Minimum product dimensions, mm | |
Width | 30 |
Height | 10 |
Maximum allowance when machining with cylindrical cutters, mm | 7 |
Number of spindles, pcs | 5 |
Spindle speed, rpm | 6000 |
Maximum depth of processed profile, mm | 20 |
Landing dimensions of horizontal spindles, mm | |
Diameter | 40h6 |
Landing dimensions of vertical spindles, mm | |
Diameter | 40h6 |
Diameter of cylindrical cutters, mm | 140 |
*Diameter of vertical profile cutters, mm | 140-180 |
Diameter of horizontal profile cutter, mm | 140-180 |
Diameter of installed saws (5 spindle), mm | 250 |
Feed speed, m/min | 7-35 |
power, kWt | |
Electric motor of the 1st spindle | 7,5 |
Electric motor of the 2nd spindle | 7,5 |
Electric motor of the 3rd spindle | 7,5 |
4th spindle motor | 7,5 |
Electric motor of the 5th spindle | 7,5 |
feed drive | 4 |
lifting-lowering | 1,1 |
The total power of the machine (rounded), kW | 42,6 |
Diameter of outlet nozzles of aspiration, mm | DN120 |
Productivity of the required aspiration, m 3 / h | 5x2000 |
Overall dimensions of the machine, mm | |
Length | 4950 |
Width | 1370 |
Height | 1840 |
Weight, kg | |
Stanka | 4950 |
* - profile cutters are not installed on the lower support.
Scope of delivery of the four-sided machine С16-51- Complete machine - 1 pc.
- Key. Tightening and loosening the nut fixing the tool on the spindle - 1 pc.
- Ring set. Spacers for horizontal spindle shafts for the possibility of installing wood-cutting tools of various lengths - 6 pcs.
- Lever. Movement of calipers in the horizontal and vertical direction. Loosening and tightening the lock screws - 1 pc.
- Operation manual - 1 pc.