How to make a paper bow. How to make a simple but powerful paper bow with your own hands! How to make a bow out of paper

The bow is the most ancient human weapon. Most peoples hunted and fought with him.

Although modern weapons are far superior to a simple bow, in the wild it will become an indispensable thing.

With a real bow and arrows, children will be happy to play. You can buy it at the store or build it yourself.

What does it consist of

An onion has only two components:

1. Shoulders;
2. Handle.

The shoulders of the bow are located above and below the handle. A special shelf is sometimes made on the handle, on which the arrow rests. A bowstring is stretched between the shoulders.

A hole is made in the bow to guide the arrow. The size of the bow and arrow depends on your height. They are easily identified by the span of the hands.

There are fixed sizes:

How to make a shallow strip foundation:

Varieties

Bows for shooting are classified according to several points:

1. 1. By the look.
      • Simple. It consists of a flexible stick, bent half-fold into an arc. Her shoulders are connected by a bowstring;
      • Difficult. Consists of a base that is reinforced with tendons and horny plates glued together. Sometimes its handle is trimmed with bone overlays.
   2. By shape.
      • Straight;
      • Curved.

materials

The material from which your bow will be depends on what it is made for. You can make a bow from the following materials:

What can you make a bow out of?

• Tree. The most common variant is ash or white acacia. The tree should not have knots, cracks, chips and other flaws;
• PVC pipe. It is made from a PVC pipe;
• Paper. Suitable for making mini bow or crossbow;
• Skis. The upper parts of the skis are used as shoulders;
• Plywood. Used to make shoulders.

What materials to make a bowstring?

For a bowstring you can use:

• Polypropylene rope;
• Thin nylon thread or lace;
• Kapron, Kevlar;
• Leska;
• Leg-split;
• Kevlar climbing sling (sold in sports stores);
• Lavsan thread.

Most often, the bowstring is made from synthetic threads.

What is the arrow made of?

Arrows are made of wood - pine or birch. Birch is more difficult to process, but in the end the shaft is of better quality. It can be a branch, board or wooden slats.

The tip of the arrow must be sharp so that it cuts through the air well and can stick. You can attach a nail and wrap it with copper wire. To use the bow for its intended purpose, it is better to cut the tip from thin steel (1.5-2 mm).

Preparing and processing wood for onions

Tools needed to make a wooden bow:

1. Drill;
2. Ax and knife;
3. Saw, jigsaw or electric jigsaw;
4. Scissors for metal, saw for metal (for making a sharp tip);
5. Sanding machine, sandpaper (for grinding parts);
6. File;
7. Needle file (file for woodworking, metalworking);
8. Stapel (to give a curved shape);
9. Planer (for processing boards).

Harvesting and processing of wood

First you need to choose what the bow will be made from. The simplest and most affordable option is a tree. Deciduous trees (oak, white locust, lemon tree,) are suitable for a powerful bow.

1. The tree is cut down on a cold, frosty day. You should pay attention to the growths and branches on the tree - there should be few of them. We cut down a large branch, at least 180 cm long. This is a blank for the future bow;
2. We do not touch the bark. We cover the ends of sawn wood with paint or impregnation with an oil base;
3. To dry, put the branch vertically for 2-3 months. The temperature should be at least 20 degrees and not more than 28 degrees;
4. Using a sharpened knife and a sharp ax, we give the workpiece a rectangular shape;
5. We steam the shoulders of the onion with steam (it is enough to hold them over boiling water). Both shoulders must be steamed at the same time;
6. The steamed blank is placed in a slipway for 14-15 days. In this case, the bark should come off the workpiece on its own. If this does not happen, gently help her with a sharp knife.
7. wax. After complete drying, we make notches for attaching the bowstring.

Instructions for creating an arrow

For a good bow, you need to make at least 4 arrows. For their manufacture, we take slats or boards, with a thickness of 2 to 3 cm. The length of the arrow is about 85 cm, but it is better to determine it from a special table, which is located above.

1. We do markup. Using a planer, we change the thickness of the board up to 1.5 centimeters;
2. We mark the board into squares (from the end) and saw it into arrows;
3. We turn squares into hexagons with a file or knife;
4. With a grinder or sandpaper, give the shaft a round shape, up to 8 mm in diameter;

1. If necessary, we attach feathers (3 pieces per arrow). It is better to take crow feathers, which we cut along. We equalize the pile with scissors, leaving 0.5 cm. We wind them with threads. Instead of feathers, you can make notches for the fingers;
2. The tip should be triangular in shape. It can be made independently;
3. In the shaft we make a notch under the tail of the tip and fasten it with the same thread.

How to make a string for a bow?

The bowstring can be made by pulling the thread over the notches that we made on the shoulders. Let's make a bowstring on our own. For this we need:

• The wrapping thread should be silk or nylon (#10);
• rubber glue;
• PVA glue;
• Wax (moisture protection);
• Board;
• 2 thick nails.

1. 1. We take two round sticks (coated with varnish or tape, from 10mm wide and 20 cm long) and a board (200x40x40). At the distance of the bowstring, we drill holes and fasten the sticks into the resulting holes;
   2. We take any coil and wind a thread for a bowstring on it;
   3. Wrap the thread for the warp evenly on the sticks. Enough 2-3 turns. We tie the ends of the thread into strong knots, which we glue with PVA;
   4. Glue (rubber) is smeared on the nylon thread immediately, then when winding, we lubricate the PVA. For the rest - we coat with PVA, and when winding - with rubber glue;
   5. The winding is made with dense turns. We wind 10 cm on each thread and shift them half a turn. We wind until loops are formed. It turns out about 20 cm on both sides;
   6. We make a loop for putting on a bowstring.

In order to put the bowstring on the shoulders, it is necessary to bend / unbend it several times. This will allow him to get used to the movement and pressure a bit.

After 10-15 actions, you need to put a loop of thread on one shoulder and turn the bow over without releasing the bowstring. Then we bend the shoulders so that there is a bowstring distance between the ends of the bow. We put on the second loop.

Attention! Never rest your shoulder on the floor or any other hard surface! So you can easily break a homemade bow.

Do-it-yourself waterproofing of the strip foundation:

Bow assembly steps

We are considering a simple bow that does not need further assembly.

In order to assemble the parts of a prefabricated shooting bow (if the handle is made separately from the shoulders), you can use ordinary wood glue or thick screws.

Archery care

• Store upright;
• We put on the bowstring before shooting. If the bow will not be used for a long time, it is better to remove the bowstring;
• Before shooting, you need to slowly pump the bow - make 5-10 swinging movements with the shoulders of the bow (let it get used to the load);
• It is impossible to rest the shoulders of the bow on a hard surface when the bowstring is put on;
• Store in a dry place, avoid direct sunlight;
• Do not let go of the bowstring without arrows;
• You can't drag the bow.

Advice! It is better to buy or make a special case for your bow with your own hands.

The video below provides detailed instructions for creating and assembling a real bow and arrows for it:

Are you having trouble finding a specific video? Then this page will help you find the video you need so much. We will easily process your requests and give you all the results. No matter what you are interested in and what you are looking for, we can easily find the video you need, no matter what direction it would be.

If you are interested in current news, then we are ready to offer you the most relevant news reports in all directions at the moment. The results of football matches, political events or world, global problems. You will always be up to date with all the events if you use our wonderful search. The awareness of the videos we provide and their quality does not depend on us, but on those who uploaded them to the Internet. We only supply you with what you are looking for and require. In any case, using our search, you will know all the news in the world.

However, the world economy is also a rather interesting topic that worries a lot of people. Quite a lot depends on the economic state of different countries. For example, import and export, any food or equipment. The same standard of living directly depends on the state of the country, as well as wages and so on. How can such information be useful? It will help you not only adapt to the consequences, but it can also warn you against traveling to one country or another. If you are an inveterate traveler, be sure to use our search.

Today it is very difficult to understand political intrigues and to understand the situation, you need to find and compare a lot of different information. That is why we can easily find for you various speeches of the State Duma deputies and their statements for all the past years. You can easily understand politics and the situation in the political arena. The policies of various countries will become clear to you and you can easily prepare yourself for the coming changes or adapt to our realities.

However, you can find here not only various news from all over the world. You can also easily find a movie that will be nice to watch in the evening with a bottle of beer or popcorn. In our search database there are films for every taste and color, you can easily find an interesting picture for yourself. We can easily find for you even the oldest and hard-to-find works, as well as well-known classics such as Star Wars: The Empire Strikes Back.

If you just want to relax a bit and are looking for funny videos, then we can quench your thirst here too. We will find for you a million different entertaining videos from all over the planet. Short jokes will easily cheer you up and will amuse you for the whole day. Using a convenient search system, you can find exactly what will make you laugh.

As you already understood, we work tirelessly so that you always get exactly what you need. We have created this wonderful search especially for you so that you can find the necessary information in the form of a video and watch it on a convenient player.

Good day to all! Today I want to share with you a cool idea on how to make a simple but powerful paper bow with your own hands. The bow is very simple, so almost everyone can repeat it.

And so for it we need:
- eight sheets of A4 paper
- durable thread
Of the tools we need:
thermo glue
-scissors

And so, first you need to make a thin tube. To do this, take a sheet of paper, and slightly tuck the end of it, after which we begin to roll up the entire sheet of paper, then glue the end. We should get such a tube, the thinner the better. We make 4 such tubes.

We take another sheet of paper, apply a thin tube as shown in the photo and make a thick tube. In total, we need 3 such tubes.

Now cut each thick tube in half:

We glue two of them:

We divide one of the halves again by sex:

Then we glue it on our last blank exactly in the center:

We cut off about 4 cm from the ends from thin tubes, since they are thin:

We glue one of the thin tubes to our workpiece, as shown in the photo:

On the reverse side, we do the same:

And on the other side, we also glue two thin tubes, just as we did before:

We take two more sheets of paper and make two more thin tubes, then cut them off on each side by 4 cm.

Then we take two more thick tubes and glue them, after which we need to stick two thin tubes on them. We do everything as shown in the photo:

We take a thick thread and begin to wind the ends on one side of our bow, after which we fix it all with hot glue. Then, observing the tension, we move to the other end and do the same.

OK it's all over Now! Our simple paper bow is ready and it remains only to test it. As arrows, you can use either barbecue skewers or rods from handles. Believe it or not, the bow actually shoots and shoots pretty well! And follow the safety rules!

Summer is coming, it's time to get ready for interesting summer activities, such as archery. Therefore, we will tell how to make a bow with arrows.

According to archaeologists, it counts for millennia, because it is one of the very first types of weapons created by man. Despite this, the bow is still used by man today, both for hunting and for entertainment.

We make a bow with our own hands

The easiest option that anyone can make is a bow from branches. For its manufacture, branches of oak, elm, cedar, birch, willow, hazel, ash are suitable for us. However, in no case do not use linden and poplar.

Wooden bow

We find on a suitable tree two long and two short branches, about the thickness of a thumb, and cut them off. The branches are longer, they will become shoulders Luke, short (at least 30 cm long) - in the middle. Free branches frombark and dry them. After that, we connect two long branches (it is desirable that they are approximately similar to each other and have the same size and bend) with thick ends. We put two short ones on them on both sides (one from the inside, the other from the outside) and tightly wrap it all with a thick fishing line (it is good because it almost does not stretch).

In order for everything to work out firmly and efficiently, ask your older brother or father to do this procedure.

For the beauty of the middle Luke can be wrapped with multi-colored electrical tape.

Stretching bowstring(from the same thick fishing line) and onion ready.

Arrows for archery

For the manufacture of arrows a round glazing bead, about 10mm in diameter, will do (ask an adult to buy it). Also arrows can be made from even and slightly thick branches, which must be cleaned of bark and dried. Do not forget to make a groove on the heel of the arrow under bowstring!

Plumage arrows made from bird feathers.

Be aware of the rules for personal safety and the safety of others, as well as the fact that

IT IS FORBIDDEN TO SHOOT PEOPLE AND ANIMALS.

Moving on to archery

Place the target 10 meters away from you. Take the arrow in your right hand and the bow in your left, put the arrow on the bow, pull it up to your ear and release the arrow.

Archery can be shot in different ways. And this difference is not in which side the arrow is applied - but in which hand draws the bow!

The Europeans prefer to draw the string with their right hand while holding the bow in their left hand.

Steppe people shoot differently - they “slightly” pull the bowstring with their right hand and strongly push the bow forward with their left, releasing the bowstring just at the moment the bow reaches the extreme limit of its movement. This, as it were, imparts additional energy to the shot and, surprisingly, the arrows fired in this way actually fly noticeably farther!

For dessert, we suggest watching a video about a rabbit who loves to swim (over 4.5 million views).

Probably, almost every boy dreams of his own shooting bow to play Indians or robbers. We, adults, seeing this desire, remember ourselves at this age. A flexible branch, thin twine, a knife or a piece of glass - and the bow is ready. And the arrows were thin twigs. Of course, you can now make a similar bow for your son. But destroying a living plant for a game is at least inhumane. What to do if the tree is a pity, and the child is categorically against a plastic magazine bow with sucker arrows, considering it a kid's fun? In our article, we offer an excellent way out of this situation. We propose to make a bow ... out of paper. Yes, yes, we did not seal it, it was from it. Of course, it is hard to believe that such a fairly soft material as paper can become a formidable weapon, and besides, look convincing. But nevertheless, it is so. We offer you a master class on making such a bow. We are sure that your "robber" will be satisfied. The bow shoots quite well, and at a decent distance. You can verify this by watching the video supplement "Shooting Bow".

We'll need

..

1. Several sheets of thick paper in two colors
2. Stationery tape
3. Scissors
4. Super glue
5. Flat cutters
6. Wooden skewers.

Making a paper bow

We take one of the sheets of thick paper and twist it into a tube, starting from the corner.

When a sheet of paper is twisted into a tube, we fix the remaining paper corner with thin stationery tape, wrapping it around the tube with a margin in the middle to avoid unwinding the paper web.

In this way, we make four tubes of the same color, in this case yellow. These tubes are intended for the manufacture of the supporting part of the nest of the future onion.

They are also produced in the amount of four pieces.

Then we take scissors and cut off those parts of the paper tubes where the paper layer is thinnest.

We take one of the unnecessary cut off fragments and wrap it tightly with tape. Then cut off a very thin part. The remaining small segment will serve as a nest for arrows in our bow.

We also cut the blanks for the onion strips, removing the thinnest paper parts. But we make the strips a little longer than the supporting part.

We take two yellow paper sticks, from which we will make a support nest, and glue them together with superglue.

Like this. Glue the other two yellow sticks in the same way.

Let's start forming the bow slats. We take paper tubes of a different color, and with the help of superglue we glue them to the supporting part, as shown in the photo above. The end of the tube-bar should be in contact with the socket.

...

This is how the glued future planks of our bow look like.

We also coat them with glue, as well as the socket tube, and glue the second fragment of the supporting part.

For greater strength, we glue the joints and seams with superglue.

Cut off the protruding parts of the paper tube with a flat cutter. If at the same time its edges are crumpled, they can be straightened with a wooden skewer.

Also, with the help of flat cutters, we cut off the excess paper, giving the craft a finished look.

We bend the bow slats a little, cut off the inner slat slightly to give a slight curvature.

We cut the ends of the slats with a flat cutter.

We stretch the twine into the resulting slot, wrap it around a few grooves around the bar, and fix it, gluing it with superglue for reliability.

Having pulled the twine to the required elasticity, we fix it in the same way on the other side.

The bow is ready. You can start shooting. Light wooden skewers with a pointed end are used as arrows.

Important!!!

Due to the risk of injury with this toy, explain to your child that the bow must not be pointed at yourself, people or animals when shooting. Also, you cannot place an archery target on the door to the room, the front door, any part of the residential area, in which the sudden appearance of a person "in the line of fire" is likely. It is best if the game with this toy will take place under the supervision and supervision of adults.

How to make a paper bow / video /

paper mini bow

paper crossbow

shooting bow

Paper mini bow

Paper bow at home

Conclusion:

Here is such an interesting way to make a real bow out of paper, we offer you in our article. Well, if your "robber" or "Indian" gets bored soon, other options will come to the rescue, for example, how to make a crossbow. Video extensions to help.