11.01.202427.05.2017

Manufacturing plant management

|

"1C:Manufacturing Enterprise Management 8" is a comprehensive application solution covering the main contours of management and accounting at a manufacturing enterprise. The solution allows you to organize a comprehensive information system that meets corporate, Russian and international standards and ensures the financial and economic activities of the enterprise.

The application solution creates a unified information space for displaying the financial and economic activities of an enterprise, covering the main business processes. At the same time, access to stored information is clearly delineated, as well as the possibility of certain actions depending on the status of employees.

At enterprises of a holding structure, a common information base can cover all organizations included in the holding. This significantly reduces the labor intensity of record keeping due to the reuse of common information sets by different organizations. At the same time, end-to-end management and regulated (accounting and tax) accounting is maintained for all organizations, but regulated reporting is generated separately for organizations.

The fact of a business transaction is registered once and is reflected in management and regulated accounting. There is no need to re-enter information. The means of registering a business transaction is a document, and to speed up the work, mechanisms for substituting “default” data and entering new documents based on previously entered ones are widely used.

In the applied solution, the following ratio of various accounting data is adopted:

Data entered by users is quickly controlled by the application solution. Thus, when registering a cash payment, the system will check the availability of funds, taking into account existing requests for their spending. And when registering the shipment of products, the system will check the status of mutual settlements with the recipient of the goods.

The application solution comes with a set of interfaces, which provides each user with priority access to the data and mechanisms of the application solution that he needs.

Regulated (accounting and tax) accounting for organizations is carried out in national currency, while for management accounting for the enterprise as a whole, any currency can be chosen. Different organizations of a single information base may use different taxation systems: in some organizations - a general taxation system, in others - a simplified one; Different tax and accounting policies may be used. In addition, a taxation system in the form of a single tax on imputed income can be applied to certain types of activities of an organization.

In addition to management and regulatory accounting, you can maintain accounting according to international financial reporting standards (IFRS). In order to reduce labor intensity, accounting under IFRS is carried out non-operatively, using translation (recalculation) of data from other types of accounting.

When developing the solution "1C: Manufacturing Enterprise Management 8", both modern international enterprise management techniques (MRP II, CRM, SCM, ERP, ERP II, etc.) and the experience of successful automation of manufacturing enterprises accumulated by 1C and partner companies were taken into account. community. Specialists from the companies "ITRP" (production management) and "1C-Rarus" (accounting according to IFRS) participated in the design and development of the configuration. On methodological issues of implementing management, financial accounting and reporting under IFRS, consulting support is provided by the world-famous auditing and consulting company PricewaterhouseCoopers.

The solution "1C:Manufacturing Enterprise Management 8" was developed on the modern technology platform "1C:Enterprise 8". In addition to the platform, the software product delivery package includes the “Manufacturing Enterprise Management” configuration.

High reliability and performance of the application solution, scalability, construction of geographically distributed systems, and integration with other information systems are ensured. The internal structure of the application solution is completely open for study and customization to the specific needs of the enterprise.

The 1C company is finalizing and developing the “Manufacturing Enterprise Management” configuration in order to reflect changes in legislation and expand functionality. Ensured prompt updating of installed application solutions. 1C and its partners provide a multi-level technical support system.

"1C: Manufacturing Enterprise Management 8" is the flagship application solution of the 1C company with the widest range of functionality. The general concept of the solution is illustrated by the diagram.

All application solution automation mechanisms can be divided into two large classes:

mechanisms to support the operating activities of the enterprise;
mechanisms for maintaining non-operational records.

Areas belonging to operating activities can be distinguished in each type of accounting (with the exception of accounting under IFRS).

In addition, the application solution is divided into separate subsystems responsible for solving groups of similar problems: a cash management subsystem, a personnel management subsystem, an accounting subsystem, etc. This division is a certain convention that makes it easier to master the application solution. In the current work of users, the boundaries between subsystems are practically not felt.

The latest edition of the "Manufacturing Enterprise Management" configuration, which is numbered 1.3, clearly demonstrates the advantages of version 8.2 of the 1C:Enterprise platform. The configuration can be used in normal application mode, familiar to users of previous editions.

"1C:Manufacturing Enterprise Management 8" can be used in a number of departments and services of manufacturing enterprises, including:

It is expected that the implementation of the application solution will have the greatest effect at enterprises with a workforce of several tens to several thousand people, with tens and hundreds of automated workstations, as well as in holding and network structures.

"1C:Manufacturing Enterprise Management 8" provides:

company management and managers those responsible for business development - ample opportunities for analysis, planning and flexible management of company resources to increase its competitiveness;
department heads, managers and employees those directly involved in production, sales, supply and other activities to support the production process - tools that allow you to increase the efficiency of daily work in their areas;
employees of enterprise accounting services- tools for automated accounting in full compliance with legal requirements and corporate standards of the enterprise.

Manufacturing enterprises interested in the recommendations of the 1C company on choosing a partner for the implementation of the product "1C: Enterprise 8. Manufacturing Enterprise Management" can contact the 1C company by e-mail:

For accounting in various areas, the common 1C program is used. She has extensive capabilities in the field of accounting. A person who is excellent at working with this application can easily find a high-paying job in almost any industry. In this article you will briefly familiarize yourself with this application. For this you will need:

— Personal computer or laptop;

— 1C software (For correct operation, we recommend using only the original and 100% licensed version of 1C, which you can).

Instructions

First, you need to install the 1C shell on your computer. It is called a shell because for it to work fully, you need to enter all the data about your company, such as:

Information about employees;
Sample contracts;
Details and others.

All information in the program can be sorted and arranged at your discretion. It also has various settings for ease of use.

Creating a new element in the “Employees” directory

2. To fill in the details of your company, you need to open the “Service” menu and select the “Organization Information” item (in different versions of the 1C application, the name of this item may be slightly different). Open the “Directory” menu and find the “Employee Directory” section; you need to enter all the information about your employees into it. There are also other directories in the program, for example, information about your partners and suppliers is entered into the “Counterparties” directory. Familiarize yourself with all available reference books so that you can navigate them freely in the future.

3. All money transfers from your organization will be displayed in the “Bank” and “Payment Documents” journals. To keep track of consumables and goods of your enterprise, many different journals have been created, such as:

Goods;
Invoice;
Accounts and others.

The program also has the ability to display many different reports and balances, all of which are based on the available data in the program. It is also possible to display reports for tax and social services.

4. If you are well versed in the basics of accounting, know the basic principles of keeping records of personnel, goods, material assets, etc., then you can easily master this program. Please note that there are a huge number of different manuals on this software on the Internet, many of them are freely available for free. They will help you quickly and effectively learn how to use this program.

Video: 1C trade management. Step-by-step scheme of work in 1C trade management

Among the variety of software products for economic and accounting purposes presented on the domestic market today, the 1C system is one of the confident leaders. Thanks to such qualities as functional flexibility, adaptability to the requirements of domestic legislation, ease of use, and the possibility of flexible configuration taking into account the characteristics of a particular enterprise, it is winning more and more users. It is no secret that in the labor market among economists, financial service workers, accountants and managers, the most in demand are specialists who are fluent in working with the 1C program, so familiarity with it is one of the important conditions for successful professional activity.

The version of the 1C: Accounting program, the description of which we offer the reader, is the latest development of the 1C company. Despite maintaining conceptual continuity with previous versions, it is a qualitatively new product that allows you to solve a variety of problems: maintaining management and accounting records, creating analytical reporting, solving planning and financial analysis problems, using multiple charts of accounts, maintaining multi-currency accounting. The program also implements a number of other new functions that significantly facilitate the work of financial workers and meet the most stringent and current requirements of today.

Important

It is possible that in the process of studying the program the reader will discover some discrepancy between the contents of this book and what he sees on the monitor screen (after all, the 1C program is constantly being improved and refined). But in any case, these differences will not be of a fundamental nature.

In this book, we propose to complete a comprehensive training course in working with the 1C program using 100 lessons, divided into thematic chapters. As you progress through each chapter, the reader will become fully proficient in the relevant techniques and methods of working with the program. Note that the capabilities of the configuration under consideration include maintaining both accounting and tax accounting. But since, from a technical point of view, many accounting and tax accounting operations are identical or very similar, in the book we will demonstrate techniques and methods of work using the example of accounting, and where necessary, give appropriate explanations.

Chapter 1
Getting to know the program and preparing it for work

In this chapter we will look at how to launch the program, create an information base, connect the “Accounting” configuration and its preliminary configuration. All these actions are performed immediately after installing the program, since without them its operation is in principle impossible. In addition, here we will talk about the capabilities of the “Accounting” configuration under consideration, its operating modes, as well as how to quickly enter initial data using the “Start Assistant”.

Lesson #1.

General information about products of the 1C family

The 1C company has long and firmly occupied a leading position in the market for economic, financial and accounting software. Currently, the company offers a wide range of software designed to solve a wide variety of accounting and management problems.

At its core, any 1C software product is a complex use of a technology platform and one or more configurations. The technological platform is the basis on which the use of the program is based, and the configuration specifies the direction of this use. In other words, the 1C technology platform is a kind of “framework” on which one or more configurations are “strung”.

Today, 1C offers products based on two technology platforms - versions 1C 7.7 and 1C 8. "Seven" has been known for quite a long time and is probably the most widespread product in its market segment. As for the G8, its active promotion began several years ago, and currently it is also one of the most popular software tools.

The capabilities of the programs of the 1C 7.7 family include the establishment, organization and automation of accounting, personnel, operational trading, warehouse and production accounting, as well as payroll calculations. The comprehensive delivery includes a set of main components of the 1C:Enterprise system, which are “Accounting”, “Operational Accounting” and “Calculation”, as well as the main configurations:

"Accounting + Trade + Warehouse + Salaries + Personnel";

"Accounting";

"Trade + Warehouse";

"Salary + Personnel";

"Production + Services + Accounting";

"Financial planning".

The user can use integrated delivery configurations either individually (linking them through data exchange mechanisms) or together. However, you can purchase configurations separately (for example, only “Accounting” or “Trade + warehouse”).

Note that the most powerful application solution created on the basis of the 1C 7.7 technology platform is the “Accounting + Trade + Warehouse + Salary + Personnel” configuration.

However, at present, more and more users of the 1C system are choosing products implemented on the basis of the 1C 8 technology platform. Developers offer a wide range of standard solutions:

"1C: Accounting 8";

"1C: Trade Management 8";

"1C: Salaries and personnel management 8";

"1C: Integrated Automation 8";

"1C: Payment documents 8", etc.

You can find out more about standard solutions from 1C on its websites at www.1c.ru and www.v8.1c.ru. And in this book we will consider one of the most popular standard solutions created on the basis of the 1C 8 technology platform - the 1C: Accounting 8 configuration.

Lesson No. 2. Purpose and functionality of the program “1C: Accounting 8”

One of the key advantages of the configuration under consideration is the flexibility of the platform, which allows the program to be widely used in a wide variety of areas. Implemented mechanisms for accounting for cash flows, fixed assets and intangible assets, production, commercial and other types of costs, other assets and liabilities of the enterprise open up wide opportunities for management accounting and go far beyond traditional accounting standards.

The tasks solved using the 1C: Accounting 8 program can be formulated as follows:

Comprehensive automation of economic, organizational and financial activities of an enterprise;

Parallel maintenance of accounting and tax accounting;

Using the mechanism of standard operations;

Accounting for enterprise funds;

Accounting for banking and cash transactions;

Accounting for the movement of inventory items;

Accounting for settlements with counterparties;

Accounting for warehouse operations;

Production accounting;

Accounting for fixed assets and intangible assets;

Accounting for wages and settlements with personnel;

Maintaining personnel records;

Setting up, generating and printing financial statements according to forms approved by regulations of the Russian Federation;

Maintaining multi-currency accounting;

Construction of various analytical reports.

In addition to those listed, using the configuration under consideration, a number of other tasks can be solved, the presence of which may be determined by the specifics of a particular enterprise.

Lesson No. 3. Running a program

After the program is installed, its program group will be created in the Start menu. The 1C Enterprise team is intended to launch the program. For ease of use, it is recommended to display the launch shortcut on the desktop using standard operating system tools.

When the program starts, a window appears on the screen (Fig. 1.1).

Rice. 1.1. Starting the program

In this window, you can select the required operating mode, as well as the information base. The 1C program can function in two modes:

1C:Enterprise;

Configurator.

The required mode is selected by clicking the corresponding button in this window. We will learn more about what each mode of operation of the 1C program is when we complete the corresponding lesson.

The central part of the program launch window contains a list of infobases. When you first start the program, this list may contain an information base with a demo configuration; This base is included in the delivery package and is intended for preliminary acquaintance with the system. The information base is selected by clicking on the corresponding list position. You can add new ones to the list or edit and delete existing infobases (we’ll talk about how to do this later).

The path to the infobase directory where the cursor is installed is displayed at the bottom of the window.

The procedure for starting the program is as follows: first, you need to click on the information base in the launch window, and then click the 1C:Enterprise or Configurator button (depending on the mode in which you want to start the program).

Lesson No. 4. Operating modes of “1C:Enterprise” and “Configurator”

As we already know from the previous lesson, the 1C program can function in two main modes: 1C: Enterprise and Configurator. The required mode is selected by clicking the corresponding button in the launch window.

1C:Enterprise mode is the operating mode of the program in accordance with its purpose. In other words, it is in 1C:Enterprise mode that accountants, financiers, managers and other users of the program work.

As for the Configurator mode, it is intended for setting up and administering the program. Here configuration objects are created and edited, interfaces and dialog boxes are configured, the appearance and contents of the printed form of documents are determined, and a number of other actions are performed to set up and configure the system. In most cases, the administrator works with the Configurator, since it requires specific knowledge.

We will not consider program configuration issues, since a separate book is needed to cover this topic. Moreover, it is not recommended for the average user to make changes to the Configurator on their own (unskilled editing of it can violate the integrity of the data, and generally lead to unpredictable consequences). The only thing we will do in the Configurator mode is to connect the “Accounting” configuration to the technology platform. (see lesson № 6).

Note that some simple and accessible settings have been moved to the 1C:Enterprise operating mode. The user can edit these parameters independently (it is recommended that the system administrator be notified). We will learn how this is done when we complete the corresponding lesson.

Lesson No. 5. Working with information bases (creating, selecting, deleting)

To start using the program, when you first launch it, you need to create an information base with which you will work (all data will be stored there). To switch to the infobase creation mode, you must click the Add button in the program launch window (see Fig. 1.1). As a result, the window shown in Fig. 1 will open on the screen. 1.2.

Rice. 1.2. The first stage of adding an information base

In this window, using the switch, you need to indicate how the information base should be created. If you are just starting to work with the 1C program, and no information bases have been created until now, then you need to set the switch to the Create a new information base position in order to create a new empty database for subsequent work. The second option is intended for connecting a previously created information base.

To move to the next step, click Next.

When creating a new information base, a window will appear on the screen, which is shown in Fig. 1.3.

Rice. 1.3. Choosing a method for creating an information base

If you need to create an infobase based on an existing template (for example, based on a demo configuration), you need to set the switch to the Create infobase from template position. In this case, a list of available configurations and templates will be displayed below, where you need to select the required position with a mouse click and click Next.

If you select the second option (lower position of the switch), an information base without configuration will be created. It will be possible to subsequently connect the required configuration from the corresponding file to it (we will consider the procedure for connecting the “Accounting” configuration later).

Rice. 1.4. Entering the name and type of infobase location

In the Specify the name of the infobase field, you need to enter an arbitrary name of the database to be created using the keyboard. Under this name, the infobase will subsequently be displayed in the list of infobases in the program launch window (see Fig. 1.1).

Using the switch below, you need to indicate where the created database will be located. In most cases, this is either a computer or a local network, so by default the switch is set to On this computer or on a computer on the local network. After clicking the Next button, the window shown in Fig. 1 will open on the screen. 1.5.

Rice. 1.5. Path to the infobase directory

This window specifies the path to the directory in which the infobase files will be stored. The figure shows the default path offered by the program. To change it, click the selection button (with three dots) located at the end of this field. As a result, the Select Directory window will open, in which, according to the usual Windows rules, the required path is indicated (if necessary, you can create a new directory).

In the Language (Country) field, select the language of the created infobase from the drop-down list. By default, this field is set to Russian (Russia).

The process of creating an information base is completed by clicking the Finish button in this window.

To change the parameters of the infobase, you need to select it in the launch window (see Fig. 1.1) by clicking the mouse and clicking the Edit button, and then make the required adjustments in a step-by-step mode.

Deleting infobases is also carried out in the program launch window. To do this, select the database to be deleted by clicking the mouse and clicking the Delete button. In this case, the program will issue an additional request to confirm the deletion operation.

Remember that to operate the program you must have at least one infobase.

Lesson No. 6. Connecting the “Accounting” configuration

As we noted earlier, the 1C: Accounting 8 program consists of two key components: a technology platform and a configuration. During the installation of the program, a technological platform is installed on the computer, to which the required configuration is subsequently connected (for example, “Trade Management”, “Human Resources Management” or, as in our case, “Accounting”).

The configuration file is included in the system delivery package, has a cf extension and is connected via the Configurator.

This is done as follows.

In the program launch window (see Fig. 1.1), click on the name of the previously created infobase and click the Configurator button. As a result, the program window will open in the Configurator operating mode (Fig. 1.6).

Rice. 1.6. Program window in Configurator operating mode

The first thing to do in this mode is to execute the main menu command Configuration | Open configuration. As a result, the Configuration window will open on the left side of the interface (Fig. 1.7).

Rice. 1.7. Opening the Configuration window

Now execute the main menu command Configuration | Load the configuration from the file (Fig. 1.8).

Rice. 1.8. Selecting the configuration load command

Please note that this command becomes available only when the Configuration window is open (see Fig. 1.7). When it is activated, the Select configuration file window shown in Fig. is displayed on the screen. 1.9.

Rice. 1.9. Selecting a configuration file

In this window you need to specify the path to the configuration file, select this file with a mouse click and click the Open button. Immediately after this, the configuration download process will begin. Information about the progress of this process will be displayed in the status bar at the bottom of the Configurator window (Fig. 1.10).

Rice. 1.10. Configuration download progress information

Please note that the process of loading a configuration from a file may take a long time, especially when working on a low-power computer.

Once the download is complete, the program will prompt you to update the database configuration (Fig. 1.11).

This request should be answered in the affirmative. Information about the progress of the update process will also be displayed in the status bar. In this case, the program will issue another request to accept the configuration changes, which should also be answered positively (otherwise the update will not be completed).

After updating the database configuration, the title of the Configurator window should display the name and version of the loaded configuration. This will confirm that the configuration connection has been completed correctly.

Now you can switch to the 1C:Enterprise operating mode and start using the program.

Lesson No. 7. Description of basic user interfaces

The 1C: Accounting 8 program has its own user interface for each operating mode. Actually, there is nothing unusual about this - this approach is practiced in most Windows applications. For example, some interfaces are provided for entering data, others for selecting objects, others for viewing a list of objects, etc. In this lesson we will get acquainted with the main interfaces of 1C: Accounting 8. Any user of the program has to deal with them in the 1C:Enterprise operating mode.

After launching the program, its main window will be displayed on the screen, which is shown in Fig. 1.12.

Rice. 1.12. Main program window

It is here that the user determines his further actions by choosing the appropriate operating mode. This can be done using the main menu, toolbar, or using the function bar located in the central part of the interface.

The selection of objects for further work is carried out in the selection or list interfaces. For example, to switch to the mode of working with any directory, you need to select it in the selection window (Fig. 1.13), which is called up on the screen using the main menu command Operations | Directories.

Rice. 1.13. Sample selection interface

In this window, you need to select the required object by clicking the mouse and press the OK button or the .

Also, selecting objects for viewing or editing can be done in the list interfaces. A typical example is working with documents. When you activate the corresponding command, a list window opens on the screen (Fig. 1.14), in which you select a document for further work.

Rice. 1.14. Example of a list window (receipt cash orders)

Note

At the beginning of operation of the program with a newly created empty infobase, all interfaces in the list will be empty, i.e. there will not be a single item in them.

The list window contains a list of relevant positions (documents, organizations, counterparties, etc.). For each list item, general information is shown in the corresponding columns: date and document number, counterparty for the document, amount, type of transaction, etc. (this is determined by the specific operating mode).

It is worth noting that the operating procedure in different list interfaces is largely similar. In other words, in the list window of cash orders, and in the list window of bank documents, and in the list window of documents for receipt of goods, and in many other similar operating modes, there are a number of similar, standard actions designed to perform certain operations. These actions are accessed using the corresponding commands in the Actions menu, which is opened by clicking the button in the upper left corner of the list window.

Let's take a closer look at these commands, since when operating the program, most of them have to be used constantly. Along the way, we will get acquainted with several more typical program interfaces (filter settings, data display, etc.).

Add. Using this command, you switch to the mode of forming a new position. When it is executed, an input and editing window opens on the screen. The Add command can also be activated by pressing the key .

Copy. The command is intended to create a new position based on an existing one (namely, based on the one on which the cursor is placed in the list). This command is convenient to use when creating several positions of the same type, in which most of the details are the same. The Copy command is also called by pressing the key .

Enterprise 8.3 Practical guide for 1C developer M. G. Radchenko

Year of Issue: 2013
Version: 3
Developer: M. G. Radchenko Publishing house Firm 1C Examples and typical techniques
Developer website: 1c.ru
Bit depth: 32bit-64
Interface language: Russian
Tablet: Not required
System requirements: Processor: 1.4-2.5 GHz RAM 1.0 GB and 10 GB of free hard disk space
Description: Book by M. G. Radchenko 1C: Enterprise 8.3. Practical guide for developers. Examples and standard techniques is a manual that allows you to quickly master the techniques of developing and modifying application solutions on the 1C:Enterprise 8.3 platform. Using the example of creating a real application solution, the structure of various system objects, their purpose and method of use is shown. Procedures are presented in the built-in language, including using the query language, which are provided with detailed comments. The book can be used both as a practical guide and as a reference guide. The application solution discussed in the book takes into account the accumulated development experience in the 1C:Enterprise 8 system and demonstrates many of the new capabilities and mechanisms provided by version 8.3. The material is intended for beginner developers who are not familiar with the 1C:Enterprise 8 system.

Clear Tutorial 1C Accounting 8.3 - How to prepare a report on retail sales.

"1C:Enterprise 8.3" - This is a significant evolution of the platform architecture towards multi-platform, mobility and web-enabled operation. All these questions, of course, are of interest primarily to experienced developers and are beyond the scope of this book.
However, even for novice developers, this version of the platform contains interesting features that need to be understood and used effectively. The new “Taxi” interface, interface operation without the use of modal windows, new search capabilities by line, convenient techniques for editing program code - these and other innovations of version 8.3 are discussed in this edition. The authors hope that the book will be useful to everyone who wants to learn how to develop application solutions on the new 1C:Enterprise 8.3 platform.

Who is this book for?

The book is based on a real example of developing an application solution for a small company providing personal services. As you study this book, you will learn basic development techniques in the 1C:Enterprise system, master various areas of business automation, including accounting, payroll, etc.
Why was this particular example chosen? On the one hand, the area of service provision is well known to most of us. One way or another, we are constantly faced with a variety of services. This includes repairing various household appliances, car maintenance, laundry and dry cleaning, hairdressing and beauty services and much more.
On the other hand, the activities of a repair company are well suited for demonstrating the capabilities of 1C:Enterprise. Here there are a variety of services provided to clients, the supply of the company with the necessary materials and their consumption in the provision of services. The work of such an enterprise allows us to consider personnel accounting and payroll calculations. There is an opportunity to illustrate accounting. This variety of activities makes it possible to demonstrate quite broadly the possibilities of generating various reports and summary data based on available information.
The book is addressed primarily to novice developers taking their first steps in developing application solutions. The explanations given in the book are detailed and accessible even to those who are only vaguely familiar with the basics of programming.
If you are just starting to work with 1C:Enterprise or are even completely unfamiliar with this system, but really want to learn, then this book is for you. The purpose of the book is to “guide you by the hand” through the main stages of developing a simple application solution in the 1C:Enterprise system and show that there is nothing inaccessible to a person with intelligence.
For more experienced developers, this book will also be useful and will allow them to recall or study in more detail certain aspects of development.

24.10.2016
In order to create favorable conditions for studying software products of the 1C:Enterprise system, 1C has made available for free download a version for learning programming in the 1C environment.

The training kit includes educational versions of the 1C:Enterprise 8 platform, training configurations "Enterprise Accounting" and "1C: Managing Our Company" (1C:UNF), documentation, teaching materials and demonstration configurations.

This solution makes self-study of 1C programs accessible to a wide range of users.

The educational version allows you to familiarize yourself with many aspects of the 1C:Enterprise 8 program system. Master the work in standard configurations "1C: Enterprise Accounting" and "1C: UNF". Learn configuration and programming techniques in the 1C:Enterprise environment: creating and changing metadata objects (directories, registers, documents, journals, enumerations, constants, etc.), setting up and developing an interface, writing program modules, creating mobile applications, etc. d.

How to download the educational version of 1C:Enterprise 8 without registration and SMS

To download, click on the button below.

On the software product page, click the “Get the product for free” link (see figure).

In the form that opens, indicate your full name and email (the remaining fields are optional), check the “I accept the License Agreement” checkbox and click “Submit”.

In your application, you can safely indicate your work e-mail, no spam or advertising will come from 1C, and if necessary, you can indicate this e-mail again, because no problem downloading the training version again.

In just a few seconds (maximum a couple of minutes), a letter from " [email protected] " with the subject line: " Link to download the product 1C:Enterprise 8.3 Version for learning programming" (see figure).

Save the archive file EducFull83.zip to the disk of your computer.
Let's unzip.

In the directory with unzipped files, find and run the file autoran.exe. In the installer window that opens, select what exactly needs to be installed.

If it doesn't start autoran.exe, then you can start the installation of the technology platform and the necessary configurations using setup.exe manually from directories:

platform_8_3_8_1933- technology platform 1C:Enterprise version 8.3.8.1933
mobile_8_3_8_58- mobile platform 1C:Enterprise version 8.3.8.58
accounting_3_0_35_27- configuration "Enterprise Accounting" version 3.0.35.27
smallbiz_1_6_5_28- configuration "Management of our company" version 1.6.5.28
money_2_0_19_2- configuration "Money" version 2.0.19.2

If everything was done correctly, then as a result of installing the training version of the 1C:Enterprise platform and the Enterprise Accounting configuration, you should see the platform in the help window about the program: "1C:Enterprise 8.3, educational version" and Configuration: "Enterprise Accounting (educational)".

Please note that the download link sent to you will be valid for 5 days after you filled out the form on the 1C website. If the download failed during this time, then it’s okay, you can go to the site again and fill out the request again, indicating your e-mail again, you will receive a second letter with a new link to download the educational version.

If necessary, you can download only the educational version of the 1C:Enterprise 8.3 platform (with a mobile platform) without configurations and additional materials, the educational version of the previous edition of 1C v.8.2 (8.2.17.169) with the configuration "Enterprise Accounting" rev.3.0 (3.0.17.11 ), as well as a training version for Kazakhstan (also the old version 1C v.8.2). To do this, you need to follow the link http://online.1c.ru/catalog/free/learning.php and select the required distribution.

Electronic supplies 1C - 100% license! Buy as quickly as possible!

Update and support for the training version of 1C:Enterprise 8

To update the educational version, you must download it again.
Support for users using the training version of 1C:Enterprise 8 for self-training in configuring and developing application solutions is provided in the conference: http://devtrainingforum.v8.1c.ru/.
Information for users of educational versions of 1C is published on the page: http://v8.1c.ru/edu/.

Delivery set "1C:Enterprise 8.3 Version for learning programming"

The electronic version of the software product "1C:Enterprise 8.3 Version for teaching programming" includes:

Distribution kit for the educational version of the 1C:Enterprise 8.3 platform (has limitations, see below);
Training configuration "1C: Enterprise Accounting" edition 3.0;
Training configuration "1C: Management of a small company" (the new name of the configuration 1C: Management of OUR company - 1C: UNF);
Training configuration "1C:Money";
Mobile platform "1C:Enterprise 8.3" (for developing mobile applications);
Mobile application "UNF";
Documentation and teaching materials in electronic form:

Description of the architecture of the 1C:Enterprise 8 platform;
Recommendations for working with the program;
"1C:Enterprise 8.3. Developer's Guide";
"1C:Enterprise 8.3. Administrator's Guide";
Developer's Glossary;
1C:ITS methodological support materials for developers;
Book by E. Yu. Khrustaleva “Introduction to the development of mobile applications on the 1C:Enterprise 8 platform”;
Book by M. G. Radchenko, E. Yu. Khrustaleva "1C: Enterprise 8.3. Practical guide for developers. Examples and standard techniques" + demo configurations for the book;

Limitations of the educational version of the 1C:Enterprise 8.3 platform

The educational version of the 1C:Enterprise 8.3 platform has a number of limitations compared to the commercial version:

Legal restrictions:

the educational version of the 1C:Enterprise platform and educational configurations do not give the right to use them for real accounting;
The 1C mobile platform included in the educational version does not provide the right to use the program for assembling distribution kits of mobile applications intended for replication and distribution.

Technological limitations

Printing and saving documents in 1C:Enterprise user mode is not supported;
Multi-user work is not supported, the number of simultaneous sessions with the infobase is limited to one session;
work in the client-server version under the control of any DBMS is not supported;
operation of distributed information bases is not supported;
for versions of the training platform below 8.3.13.1644, working with the extension mechanism is not supported;
COM connection is not supported;
The use of passwords and operating system authentication for users is not supported;
Copying the contents of more than one cell of a spreadsheet document in 1C:Enterprise mode is not supported;
working with the configuration repository is not supported;
The performance of the educational version is lower than that of the commercial version of 1C:Enterprise 8;
functionality related to configuration delivery is not available;
delimiter values are set to the default values for a given delimiter type.

Limitations on the amount of information entered in documents, directories, charts of accounts, charts of characteristics types and other object tables:

the maximum number of records in the accounts tables is 2000;
the maximum number of records in the main object tables is 2000;
number of records in tabular parts of objects – 1000;
number of records in record sets – 2000;
number of records from external data sources – 200;

The actual operation of application solutions on the 1C:Enterprise platform can only be carried out on commercial versions of the system.

Extension support

Support for the configuration extension mechanism is implemented in the educational version of the 1C:Enterprise 8.3 platform starting from version 8.3.13.1644.

Educational versions with books and CDs

For those who are more comfortable and accustomed to working with printed documentation and methodological literature on paper, the usual options for supplying educational versions of 1C with books and distribution kits on CD remain on sale.

Additionally, the boxed version of "1C:Enterprise 8. Version for training in programming" includes a registration form, which makes it possible to register the software product in your personal account on the ITS portal and download updates to the training version of the 1C:Enterprise platform from the 1C technical support website. as they are released and other privileges for users of registered software products.

Training version of the 1C: Trade Management configuration

The training version of the 1C: Trade Management version 11.3 configuration (without the 1C: Enterprise 8.3 platform) can be downloaded separately from the link.
The training version of the 1C: Trade Management version 11.4 configuration (without the 1C: Enterprise 8.3 platform) can be downloaded separately from