A kitchen apron made of plastic is strong, durable, resistant to chemical detergents, changes in temperature conditions, and resistant to the development of fungi and mold. The materials are presented in different colors, textures, thicknesses, sizes, and are decorated with photo printing, painting, and film. Plastic elements are attached to self-tapping screws, an adhesive base, sheathing or guide panels.
Advantages and disadvantages of plastic aprons
The plastic apron is made from panels with different compositions and produced using various techniques, each with its own advantages. The list of main materials includes the following materials:
- Polyvinyl chloride panels are produced in widths up to 500 mm, lengths up to 3000 mm, thickness 5-10 mm. When fastening, seams are created that are sealed with sealants. When installing, it is important to take accurate measurements of the apron.
- The apron made of sheet plastic has a smooth surface. The advantage of this type of material is the ability to create a seamless coating.
- The polycarbonate apron is highly durable. The composition of carbonate glass is similar to the characteristics of metal alloys. The carbonate coating does not break, is resistant to mechanical damage, is aesthetically pleasing, and allows you to reproduce photo prints and images in 3D format.
Advantages of a plastic apron:
- affordable cost in comparison with other finishing materials;
- high resistance to increased importance;
- resistance to high temperatures;
- bacteria and mold do not appear on the surface of the plastic;
- ease of care;
- small weight;
- simple installation that you can do yourself;
- wide palette of shades and textures;
- resistance to household chemicals, food fats and acids;
- durability of use.
Kitchen aprons made of plastic have the following disadvantages:
- instability to abrasive detergents;
- it is inadmissible to place plastic near the gas hob; the materials can only withstand electric and induction cookers;
- wearability.
Rules for installing a PVC apron
Installation of a plastic apron in the kitchen is carried out after preparing the wall panels, which are cleaned of dust and dirt, leveled using primer, putty and plastering. When gluing thick plastic, you don’t have to perform complex repair work, because... the material will hide the deformations. After the repair is completed, the apron parts are fixed using self-tapping screws to minimize damage to the kitchen set.
Materials and tools
The PVC apron can be attached using the following tools and building materials:
- metal profiles;
- screwdriver;
- wood blocks;
- self-tapping screws;
- construction level;
- dowels for creating sheathing;
- ruler;
- special glue;
- yardstick;
- pencil or chalk;
- hammer.
Mounting methods
A plastic kitchen apron can be attached to the wall on:
- liquid Nails;
- self-tapping screws;
- lathing;
- special profiles;
Special profiles for guides
Fixing the apron on guide profiles is a budget-friendly and practical method. The installation technology allows you to change panels if you need to change the design without lengthy installation work. Guides are metal slats that are attached to the surface of the wall panel in a horizontal direction using self-tapping screws or construction staples. The cracks are hidden with sealant.
Self-tapping screws
When installing an apron at the stage of repair work when planning a design for a long period, it is recommended to use self-tapping screws. Plastic elements need to be drilled to create openings for fastenings. To implement this method, the surfaces of the wall panels should be leveled.
Traces from self-tapping screws on the facade are subsequently masked with plastic overlays in the same color scheme. The panels should not be tightly adjacent to the wall, so electrical wiring and other communication lines can be hidden under the facade. The fastening technology, if necessary, provides for dismantling and repair.
On the sheathing
You can attach the apron to the sheathing using timber beams, thin slats, PVC guides or a galvanized profile. The technology is optimal for hiding gas pipes and water supply structures under the facade of the electrical wiring network. A small distance is left between the wall panel and the set. Wall surfaces must be treated with antiseptic compounds and antifungal impregnations. When using wooden beams, you need to lubricate the materials with a hydrophobic compound.
The beams for the sheathing, depending on the design of the project, are arranged horizontally or vertically. For sufficient structural strength there must be at least 3 pieces. The pitch of the lamellas in a horizontal arrangement is 200-400 mm. The elements are fixed using dowels, which are installed in increments of 250 mm. The beams must be symmetrically located, so a building level is used in the work.
On glue
You can glue the apron using special liquid nails. The wall must be smooth, without deformations. The installation method is characterized by high speed, ease of execution, and does not require the use of special equipment. If there is old wallpaper or putty on the walls, the materials are cleaned off. They also remove residual grease, dust and other contaminants. Then the surfaces are coated with a primer for rooms with high humidity, which has antifungal properties.
It is recommended to apply glue liberally to securely fix the materials. You need to install a bottle of glue in the gun and distribute the composition over the surfaces in zigzag strokes. The apron elements treated with glue are applied to the wall panel, pressed down, and left for some time until the adhesive base dries.
For installation, it is recommended to choose sheets of standard sizes with a width of 600 mm and a length of 1000-3000 mm. The cutting of parts is also carried out according to the author's design project.
Panel preparation, layout, cutting
Before fixing the facade, the elements are prepared: the parts are assembled, the panels are cut. Wide panels are placed horizontally to reduce the number of joints. Narrow fabrics need to be cut and secured at vertical seams. The material is cut with a knife, scissors or a hacksaw. Work can be ordered from professional workshops that perform laser cutting.
Final finishing
The finishing stage involves closing the space between the apron and the work table with borders. The constructive solution will prevent moisture and dust from entering the cracks; will allow correction of work defects. The border can be flat, figured, triangular, rectangular in shape; it adds additional decorative value to the façade of the set. The elements are attached to an adhesive base. The finished look of the façade is given by corner overlays.
Decorating an apron
When planning a project, it is important to determine the design and techniques for decorating the backsplash in accordance with the color and stylistic scheme of the kitchen. For a small room, it is not recommended to use dark colors, which visually make the room smaller. It is recommended to purchase canvases in light shades or transparent panels with a printed pattern. The list of popular techniques for decorating panels includes painting, photo wallpaper, and films.
Decorative painting
Decorative painting in the design of an apron is effective. Acrylic paints, a sketch from a catalog or prepared according to an author's design will be useful for the work. Complex compositions are not recommended due to difficulties in execution and overloaded design of the typeface.
Before decorating, the coating is cleaned and degreased. Then the main tone is applied, and a drawing is made on top. The paint should be applied in a thin layer. The image is placed in the center of the apron or a repeating geometric or floral pattern is made.
A universal base tone can be a coating of the following colors:
- white;
- cream;
- grey;
- beige;
- olive;
- Ivory;
- metal;
- soft peach.
Painting is done with matte or glossy paints. The optimal solution for the kitchen is a small ornament that hides chips and scratches. Light colors allow you to visually enlarge the space; You can create accent areas using rich tones.
Photo wallpaper
A simple and effective method of decorating plastic facades is pasting with photo wallpaper. The material is applied to a dust-free surface. The adhesive base is smeared onto the photo image from the reverse side, then the coating is pressed against the apron. After the elements have dried, the apron is fixed to the wall.
Photo wallpapers are selected to match the style of the room and the texture of the room decoration.
Coverings can be:
- vinyl;
- non-woven;
- washable;
- acrylic;
- metal, etc.
Washable photo wallpapers are inexpensive and easy to clean. The materials are dense, waterproof, and smooth; presented in a wide range of shades. The canvases are attached to the leveled surfaces of the apron, because do not hide deformations.
Non-woven materials are produced with a special protective moisture-resistant coating. They are resistant to direct sunlight, dust, and can be easily cleaned. Pigmentation remains intact during use without damage.
Vinyl materials for photo wallpaper are durable, retain a rich tone, are easy to care for, and are resistant to moisture and household detergents. The sheets are dense, so they hide the unevenness of the walls. Materials are available matte or glossy, textured or embossed. The textures of wood, stone, Provençal ornaments, and original designs are reproduced on the coatings.
Film
Self-adhesive film allows you to quickly decorate the facade of your kitchen unit. Manufacturers offer a wide palette of shades, the ability to order photo printing with original prints of landscapes and paintings. The film is applied to a clean and flat surface. To improve adhesion qualities, the plastic is moistened with water and the location of the film is adjusted. It is necessary to remove the air under the coating.
When choosing a material, you need to take into account the colors of the kitchen. Saturated shades and contrasting combinations are optimal; for loft, Provence, and minimalist styles, light neutrals (brown, green, ocher, soft pink) are used. For a country-style kitchen, the optimal films are wood texture, imitation brickwork, stone.
Rules for caring for an apron
When caring for an apron, the following rules must be observed:
- Regular cleaning with a damp sponge and household cleaning products is required.
- To remove water and detergents, after cleaning the surface is wiped with a dry cloth.
- It is not recommended to use compounds with abrasive particles and acid-base agents.
During operation and cleaning, the characteristics of the apron coatings are taken into account, which can be smooth or with a textured surface.
Your repost will change the Internet :)
The classic solution is a tile backsplash, but not everyone finds the design to their liking. In addition, installation is a troublesome task.
It’s much easier with aprons made of MDF, wood and even metal. But all these materials are inferior to plastic in terms of cheapness and ease of installation.
2.
3.
4.
1. Types of plastic
PVC plastic is highly rigid and durable, it can be painted and varnished, and is also very resistant to fire. The price is relatively low. In addition, its installation can be done on your own.
Polycarbonate aprons are the most durable and resistant to various types of damage, but they are also the most expensive type of plastic. As a rule, people come for such an apron purposefully; it is not as popular as PVC. But it is impossible for an untrained buyer to visually distinguish between these two plastics.
2. Advantages and disadvantages
Advantages of plastic:
- It is resistant to moisture,
- the holes required for sockets can be easily cut out in it,
- Installation on the wall will not take much time.
- Choose style and color will not be difficult even for the most sophisticated kitchen. Polycarbonate, in addition to the above advantages, is characterized by resistance to high temperatures and even aggressive household chemicals.
Review by Ksenia Vorontsova: I have a plastic apron in my kitchen. In principle, I am satisfied with it. It is easy to care for and can be cleaned with regular cleaning products. The only negative is that it is not as beautiful as glass with a pattern.
The disadvantages include some difficulty in care:
- Water stains form on the surface
- PVC scratches quite easily and scratches will be noticeable
- PVC can be deformed due to high temperatures.
Review by Igor Shkurny: I had a plastic one... I installed it temporarily because I had nothing to do.. to be honest - it’s fucking rare. Firstly, all these corners, and secondly, the fragility of the plastic. Now there is a table instead of a panel (I got it on a ball). I like it, it’s durable and practical, but in general it’s done either with TILES or a wall panel.
3. Installation
Installation does not require any special skills, but the presence of some tools - yes. The choice of installation method depends on the curvature of the wall:
- If the wall is absolutely flat, the apron can be attached with glue. However, the glue will leave marks on the wall and on the plastic itself; removing and hanging the panel again will not work. When choosing this installation method, special attention should be paid to surface preparation. After removing the old coating, all cracks and crevices need to be sealed and the wall primed.
Tools and materials: mounting adhesive, building level and tape measure.
- An easier installation method is using self-tapping screws. Before installation, the surface must be leveled, however, the same care as when installing with glue is not required. Then you can start installation. After completing the work, the screw heads must be closed with decorative plugs, and the edges of the apron must be covered with baseboards or other elements.
Tools and materials: hammer drill or impact drill, screwdriver or screwdriver, self-tapping screws, decorative plugs and baseboards, as well as a building level and tape measure.
- Using self-tapping screws on the sheathing - in this case, the wall does not need to be specially prepared at all. It is enough to make a sheathing and install an apron on it. Further actions are similar to the second method.
Tools and materials: hammer drill or impact drill, screwdriver or screwdriver, material and equipment for creating sheathing, decorative caps and baseboards, as well as a building level and tape measure.
4. Photos and prices
Unfortunately, all our attempts to find real photos of plastic aprons with prices ended unsuccessfully. Manufacturers and sellers persistently prefer to post photographs of samples rather than finished work on the Internet. And, as a rule, these samples involve photo printing.
Cost of 1 p.m. 60 cm wide (standard size) from 20 to 50 dollars.
PVC plastic apron with photo printing measuring 2x0.6 m for about $50
Yellow gloss 
PVC apron panels are a budget option and are used to protect and decorate walls. Due to the high cost, skinals are less common - tempered plexiglass with decorative design. Since panels are produced in different qualities, products made from ABS plastic are especially popular. A plastic apron can be purchased ready-made or made to order, and installation of the apron does not require specialized repair skills.
Due to the soft structure characteristic of polymers, this material is flexible, which avoids deformation during operation. When installation is carried out, the sheet is equally successfully cut with a table knife and a jigsaw. ABS panels in stores are presented in two standard formats: 601x3001 and 601x2001 mm with a thickness of 1.6 mm.
Opaque ABS plastic and similar products are decorated with a special film or using photo printing. Family photos and unique travel snapshots are displayed on the surface, and an exclusive gallery adorns the perimeter of the kitchen. Compositions of flora and fauna, motifs on the theme of nature are considered a priority. First, a design is selected from a photo from the catalog, then the membrane is applied to the skins.
Advantages of plastic kitchen aprons
Advice! An apron made of transparent polycarbonate is indispensable for small spaces. For example, ABS skins with a transparent watercolor pattern will visually expand the space. At the same time, you can install an LED strip under the skinali as a backlight; this looks especially good if the panels are fixed to the frame.
Disadvantages of a plastic apron:
- Insufficient strength. After any dynamic load, a mark remains on the surface of the polymer;
- For 3-5 years the material will retain its original appearance, but then the panel will begin to fade. Light-colored products turn yellow over time.
Important! A plastic kitchen apron is comparable in fragility to glass and requires careful handling. Products made from polycarbonate are characterized by a degree limit of +66 °C, so the hob should not be installed close to the wall.
The principle of attaching a plastic apron with your own hands
Do-it-yourself installation of plastic skins is done in several ways: with glue and lathing. Traditionally, a kitchen apron made of plastic is installed using classical technology - on slats. With any method of fastening, first of all the wall is carefully leveled.
Technological nuances
You can attach the panel with self-tapping screws, since the caps will be hidden behind the cabinets. If you need to assemble a kitchen apron from small segments of plastic - 30 cm in width, the modules are composed according to the principle of wall panels. The first strip is inserted into the lower profile. The second is fitted into the groove and secured with staples. One end of the fastening element clings to the frame, the other holds it. The following modules are installed identically. To ensure that not a single joint is noticeable, each plate is adjusted to the previous one with a rubber hammer. The finishing module snaps into the groove. Installing an F-profile will completely hide all the lines.
The disadvantage of this method is the free space between the sheet and the wall where mold can develop. The advantage is that the screen can be easily replaced if damaged. If you want your polymer apron to last a long time and not lose its attractiveness, you can pay attention to more expensive analogues, for example, glass skinals.
You can only glue an ABS plastic apron with liquid nails onto a perfectly flat wall. The glue is distributed in a dotted line over the surface where the polymer sheet is applied and pressed. The sheet is supported from above by spacers. At the corners and at the bottom it is additionally secured with self-tapping screws.
This installation method is simpler if the walls are smooth and no additional work is required to level them. The disadvantage is the inconvenience of dismantling and replacement.
A plastic apron is an opportunity to radically change the interior of your kitchen by adding bright colors to it. Many people in the reviews say that they installed a similar structure in the kitchen with their own hands. You can choose different types of plastic that will fit into the design of any interior - imitating natural materials, with photo printing, plain. You can also place your photos on the apron, which will make your kitchen space unique.
Plastic aprons for the kitchen and their types
An apron is a canvas that covers part of the wall in the kitchen. The coating is placed in the “working area” and serves to protect the wall from exposure to temperatures, accumulation of dirt, and also acts as an independent piece of furniture. The apron is mounted near the stove, sink, and also above the countertop.
Typically, aprons made of dense materials such as ceramic tiles, marble, wood panels or fire-resistant glass are installed in the work area. Recently, aprons made of plastic have become popular, which is much cheaper than other materials and at the same time reliably protects the surface of the wall.
The following types of plastic aprons are offered for installation:
- ABS sheets. This material is sold in the form of plates from which the desired shape can be cut. Typically, ABS sheets are used if you plan to use photo printing. You can choose plastic with an image already applied or order an individual design, for example, place a high-quality photograph or a beautiful picture on the canvas.
- PVC panels. They are sold with a pattern already applied, usually decorated with ornaments or plain. Plastic is quite popular, which imitates various surfaces - marble, wood, mosaic. They vary in panel thickness.
- PVC lining. On the market you can find several types of such material, which differ in thickness. Usually produced in a single color in soothing pastel colors.
The choice of material should be based on its technical characteristics, as well as the personal preferences of the customer.
Advice. The thicker the plastic chosen for mounting the apron, the higher its strength and resistance to temperature.
It is worth noting that different types of plastic differ significantly in price. For example, PVC lining is much cheaper than other types, and the most expensive type is ABS sheets. You will also have to pay extra to add a personal design to the apron.
The main pros and cons of a plastic apron
Plastic aprons are installed in almost all modern kitchens. This popularity of the material is due to its positive qualities:
- plastic is much cheaper than other materials that are used to install aprons;
- easy to clean - just wipe the apron regularly with a soft sponge;
- is not afraid of moisture, steam, and can also withstand high temperatures (up to 80 degrees);
- does not require preparation of the wall surface before installation;
- easy to install - you can install it yourself;
- has many colors, which allows you to create a unique kitchen design;
- the design on the plastic does not fade or fade even with prolonged use;
- durable in use if properly maintained;
- The apron can be easily removed if necessary.
With all the advantages of a plastic apron, it has a number of disadvantages.
- The main disadvantage of plastic in the kitchen interior is the flammability of the material. Placing an apron in close proximity to open sources of fire may result in a fire. In this case, the plastic ignites in a few seconds and completely melts in 5 minutes. When burned, it forms toxic substances that are deadly to humans. Therefore, owners of gas stoves should place the apron at a distance of at least 20 cm from the fire. It is also recommended to separate the stove from the wall using a metal cover.
- There are many models of low-quality plastic on the market, which usually costs much less, but at the same time has low technical characteristics. This material releases toxic gas when heated. To avoid buying a fake, be sure to ask the seller for a quality certificate.
- The plastic apron does not tolerate impacts. When large objects hit the surface, small cracks and dents form on the plastic, and the design is damaged.
- The material is subject to deformation due to exposure to abrasive substances, as well as detergents that contain acetone. Do not try to wash the surface with metal sponges, as cracks and scratches may form.
Of course, a plastic apron has more positive qualities than negative ones. If you properly care for the surface and also take the choice of material seriously, the apron will bring only positive emotions to the apartment owners.
DIY installation of a plastic apron
You can install an apron in the kitchen yourself or turn to professionals for help. For installation you will need a minimum set of tools and consumables.
The first thing you need to do is choose the type of plastic and its color. Having selected the material to suit the design of your kitchen, you can begin taking measurements.
Advice. In order to correctly measure the area of the canvas, it is necessary to carry out measurements with a margin. Part of the apron, approximately 20 cm, should extend beyond the wall cabinets and countertop. This way you can achieve maximum wall protection.
After selecting and purchasing plastic, you can begin its installation. Before starting work, you should treat the surface of the wall with a primer and let it dry a little. There is no need to level the wall before work. Installation is carried out in several ways:
- attaching the apron to waterproof glue;
- fastening the canvas using self-tapping screws;
- installation of plastic on a pre-prepared structure.
The first method is the simplest - strips of glue are applied to the wall. First, the glue is applied around the perimeter, and then in horizontal stripes with an interval of 15 cm. Then pre-degreased plastic is applied to the wall. This installation method is the fastest, but has a drawback - it will not be possible to remove the plastic sheet without deformation.
Attaching the apron using self-tapping screws is also not difficult. For reliable fastening, four self-tapping screws are sufficient, which are located around the perimeter of the canvas.
If the kitchen wall is uneven, a plastic apron can be attached to an aluminum profile. In this case, aluminum or wooden slats are first attached to the wall, and then an apron is mounted on them.
After installation is complete, holes are cut out on the apron for sockets, wires and pipes.
Thus, a plastic apron is an economical and easy way to decorate your kitchen.
Installation of a plastic kitchen apron: video
Plastic apron: photo
The classic solution is a tile backsplash, but not everyone finds the design to their liking. In addition, installation is a troublesome task.
It’s much easier with aprons made of MDF, wood and even metal. But all these materials are inferior to plastic in terms of cheapness and ease of installation.
1. Types of plastic
PVC plastic is highly rigid and durable, it can be painted and varnished, and is also very resistant to fire. The price is relatively low. In addition, its installation can be done on your own.
Polycarbonate aprons are the most durable and resistant to various types of damage, but they are also the most expensive type of plastic. As a rule, people come for such an apron purposefully; it is not as popular as PVC. But it is impossible for an untrained buyer to visually distinguish between these two plastics.
2. Advantages and disadvantages
Advantages of plastic:
- It is resistant to moisture,
- the holes required for sockets can be easily cut out in it,
- Installation on the wall will not take much time.
- Choose style and color will not be difficult even for the most sophisticated kitchen. Polycarbonate, in addition to the above advantages, is characterized by resistance to high temperatures and even aggressive household chemicals.
Review by Ksenia Vorontsova: I have a plastic apron in my kitchen. In principle, I am satisfied with it. It is easy to care for and can be cleaned with regular cleaning products. The only negative is that it is not as beautiful as glass with a pattern.
The disadvantages include some difficulty in care:
- Water stains form on the surface
- PVC scratches quite easily and scratches will be noticeable
- PVC can be deformed due to high temperatures.
Review by Igor Shkurny: I had a plastic one... I installed it temporarily because I had nothing to do.. to be honest - it’s fucking rare. Firstly, all these corners, and secondly, the fragility of the plastic. Now there is a table instead of a panel (I got it on a ball). I like it, it’s durable and practical, but in general it’s done either with TILES or a wall panel.
3. Installation
Installation does not require any special skills, but the presence of some tools - yes. The choice of installation method depends on the curvature of the wall:
- If the wall is absolutely flat, the apron can be attached with glue. However, the glue will leave marks on the wall and on the plastic itself; removing and hanging the panel again will not work. When choosing this installation method, special attention should be paid to surface preparation. After removing the old coating, all cracks and crevices need to be sealed and the wall primed.
Tools and materials: mounting adhesive, building level and tape measure.
- An easier installation method is using self-tapping screws. Before installation, the surface must be leveled, however, the same care as when installing with glue is not required. Then you can start installation. After completing the work, the screw heads must be closed with decorative plugs, and the edges of the apron must be covered with baseboards or other elements.
Tools and materials: hammer drill or impact drill, screwdriver or screwdriver, self-tapping screws, decorative plugs and baseboards, as well as a building level and tape measure.
- Using self-tapping screws on the sheathing - in this case, the wall does not need to be specially prepared at all. It is enough to make a sheathing and install an apron on it. Further actions are similar to the second method.
Tools and materials: hammer drill or impact drill, screwdriver or screwdriver, material and equipment for creating sheathing, decorative caps and baseboards, as well as a building level and tape measure.
4. Photos and prices
Unfortunately, all our attempts to find real photos of plastic aprons with prices ended unsuccessfully. Manufacturers and sellers persistently prefer to post photographs of samples rather than finished work on the Internet. And, as a rule, these samples involve photo printing.
Cost of 1 p.m. 60 cm wide (standard size) from 20 to 50 dollars.
PVC plastic apron with photo printing measuring 2x0.6 m for about $50
An apron for a kitchen set is a useful and even necessary interior detail. It can be not only ceramic, but also plastic - let’s take a closer look at this option.
A sink for washing dishes, a cutting table, a gas or electric stove - most often these kitchen elements in our apartments are located along one wall. During the cooking process, splashes of water, steam and fat inevitably fly from the sink and stove, and the process of cutting food leaves noticeable marks. Therefore, the wall adjacent to the sink, stove and table can quickly lose its presentable appearance.
For this reason, the kitchen workspace is usually decorated with a so-called apron. This element is a large “overlay” that should protect the surface of the wall. The apron is always made of material that is resistant to moisture and is easy to clean from dirt.
Undoubtedly, a ceramic tile backsplash remains a classic option. However, it has the highest cost - and during the repair process you really want to save money. A good alternative could be a panel made of high-quality plastic - durable, beautiful and inexpensive.
A plastic apron is made from polymer materials - polycarbonate or polyvinyl chloride. Plastic models come in a wide variety of textures and patterns and can be either glossy or matte. In terms of their characteristics, they are not inferior to ceramics - and in some parameters they even surpass it.
Advantages of a plastic apron
What are the advantages of a plastic apron for the kitchen wall?
- First of all, this option is extremely low cost. The issue of price becomes especially important when it comes to a spacious kitchen, where it is necessary to cover a significant section of the wall with an apron. To lay it out with tiles would require a lot of expense - but plastic allows you to spend a minimum of money.
- Plastic models have an attractive appearance. Thanks to the variety of design options, you can choose an element that will fit perfectly into the kitchen interior - and will look solid and aesthetically pleasing. It is a mistake to think that plastic looks cheap - modern technologies make it possible to create very beautiful and sophisticated products.
- The apron collects a minimum of dirt and is easy to wash. Streaks and stains from water, droplets of grease, sediment from evaporation - all this is quickly removed from the plastic surface with an ordinary damp sponge. Plastic can be washed using household chemicals - the material will not be damaged, the main thing is not to use abrasive powder products.
- The seams between the panel components are very small, almost invisible. Therefore, even after long-term use, they do not become clogged with dirt.
- Plastic tolerates difficult operating conditions well. It calmly reacts to high humidity, does not deform from temperature changes, and does not fade from sunlight.
- The plastic panel is easy to install. To accurately fix ceramic tiles, you must have repair skills - in addition, the tiles take a long time to dry. The plastic is installed with your own hands in a couple of hours - you can use the kitchen right away, without a long wait.
The disadvantages of such models include only the sensitivity of the material to abrasive influences - however, almost all materials have a similar disadvantage. In order for the plastic to retain its presentable appearance for a long time, it is enough just not to scratch it and not to use powders when cleaning.
How to attach an apron to the wall?
How exactly is a plastic apron attached to the kitchen wall? There are four main methods - all of them are convenient and quite simple. Let's take a closer look at each of them.
On special profile guides
As already said, a plastic apron is a very inexpensive purchase. Therefore, many people prefer to experiment with design, replacing the panel with a new one from time to time. If you suspect that in a couple of years you will want to refresh the interior, then it is best to mount the cladding on the profile guides - this way you can freely remove the covering without damaging the wall.
The guides are special metal slats that are fixed horizontally to the wall surface using self-tapping screws. The plastic sheet is simply installed on the guides, like on a kind of “rails” - and, if necessary, is pulled out and replaced with a new one.
Self-tapping screws to the wall
If you are choosing kitchen cladding for years to come and are not going to change it without good reason, then you can immediately use self-tapping screws - plastic can easily be drilled through. This installation method requires the most even rough surface - but it will be very convenient if behind the apron there is an expensive decorative coating that you don’t want to spoil with metal slats and especially glue. It is easy to disguise traces of screws on the surface of the plastic - simply by placing plugs that match the color.
By the way, with this installation method, the plastic panel does not fit flush against the wall - a small space remains behind it. If desired, you can hide electrical wiring under the apron. In addition, the self-tapping apron is also easy to remove.
On the sheathing
If the kitchen space is quite spacious and a wide section of the wall needs to be covered with an apron, many people prefer to save effort - and install the cladding directly on the rough wall without decorative finishing. In such cases, the wall is not always perfectly flat - however, this can be easily corrected with the help of lathing.
The sheathing consists of several metal slats or wooden blocks attached to the wall along the perimeter of the future apron. First, a kind of square is created on the wall, matching the size of the apron. Then additional horizontal and vertical strips are fixed inside it with self-tapping screws, giving the structure greater stability and strength. A plastic panel is attached to the resulting sheathing, also with self-tapping screws. There is some space left between the apron and the wall where you can lay electrical wiring or, for example, make lighting.
On glue
Finally, the easiest way to install siding is to glue it down. It is best to use liquid nails. The glue is applied in thin strips at a short distance from each other, and then the plastic panel is pressed on top.
The main advantage of the method is speed and ease of installation. But it must be taken into account that the plastic panel can only be glued to a perfectly flat wall. If the surface has even slight differences in height, the apron will not attach well and may quickly fall off.
Cost of a plastic apron
How much does a plastic apron cost? The exact price always depends on the material and decorative design of the apron. For example, polycarbonate is cheaper than polyvinyl chloride; a panel with a uniform texture will be cheaper than a panel made to look like marble or wood.
On average, the cost of a plastic apron is about 1,500 rubles. When choosing a panel, it is not recommended to consider overly cheap models - they may turn out to be of lower quality and durability.
External variety of plastic aprons
What design possibilities does a plastic apron provide when installing it in the kitchen? The appearance of the panels is very diverse. The simplest variety can be called ordinary plain aprons or PVC panels that imitate lining. But if you want to create a truly unusual design in the kitchen, then you should pay attention to aprons with a pattern or artistic texture.
- Plastic aprons designed to look like tiles, mosaics, natural stone or wood are very popular. This surface quite convincingly imitates granite and marble, wood, colored glass, and brick.
- An interesting variety can be called models with a colored pattern. The image is applied in two ways - it can be extruded on the plastic itself or on a film, which is a decorative layer of a plastic panel. The options for drawings are truly endless - they can be flowers, natural or city landscapes, still lifes and much more.
- The plastic apron can have a glossy or matte surface. What to choose depends on personal preferences. However, keep in mind that you will have to take more care of the shiny surface - dried water splashes and droplets of grease will be especially noticeable on it.
In general, a plastic apron fits perfectly into any interior and in appearance is practically no different from more expensive materials. If you are looking to save money on home renovations, this design option can be a real godsend for you.
Tell
Plastic aprons for the kitchen are becoming increasingly popular. The reason for this is the price-quality ratio. For example, a kitchen apron made of plastic with photo printing will cost several times less than a similar apron made of tempered glass (). Ease of installation also plays a role, because you can install such an apron yourself, avoiding additional costs.
Plastic, or resin, is a synthetic material made from polymers. Polymers are produced synthetically, and at the same time they set the desired properties, producing plastics for various purposes. Kitchen aprons made of plastic are mainly made from several types of plastics, differing both in properties and in price.
Types of plastic for aprons in the kitchen
ABS
ABS plastic is produced in the form of granules, transparent or colored. They are molded into flat sheets of size 3000x600x1.5 mm or 2000x600x1.5 mm. This is a very shock and bending resistant material. If the temperature briefly rises to 100 degrees, it will not catch fire, but 80 degrees can withstand for a long time, so ABS kitchen splashbacks are fireproof. This plastic can be coated with a metallized coating - then it will look like a mirror, but the weight and installation of products made from it is much lighter than from mirror glass.
The main advantages of the material:
- Resistant to aggressive liquids and environments;
- Does not deteriorate when interacting with fats, oils, hydrocarbons;
- It can have both a matte and shiny surface;
- Wide variety of colors;
- Non-toxic;
- Can be used at temperatures from -40 to +90.
Disadvantages of a kitchen apron made of ABS plastic:
- Fast fading in sunlight;
- When acetone or solvents containing it come into contact with the surface, the plastic dissolves and loses its appearance;
- The material has a yellow tint.
Acrylic glass (polycarbonate)
Produced in the form of sheets with dimensions 3000x600x1.5 mm and 2000x600x1.5 mm. In many respects, this material is superior to glass - it is more transparent, can withstand even strong impacts, while it has a low specific gravity, and is easier to mount on the wall in the kitchen than glass.
Advantages of a polycarbonate kitchen apron:
- High transparency;
- Resistance to impacts and bending;
- Fire resistance;
- Does not fade or fade in the sun;
- Fire safety: does not burn, but melts and solidifies in the form of threads, does not form toxic substances during combustion;
- Does not release substances hazardous to health into the air even when heated;
- It has an attractive appearance and is practically indistinguishable from glass.
The only negative is the rather high price of the product compared to other types of plastic aprons, but it is still much cheaper for the kitchen, although it is superior in some respects.
PVC
Polyvinyl chloride has long been widely used in finishing work, and not only in the kitchen. Most often, kitchen panels for plastic splashbacks are made from this material. This is a fairly budget option, which has its pros and cons.
Finishing materials are available in several types:
- Panels: up to 3000 x (150 - 500) mm;
- Lining: up to 3000 x (100 - 125) mm;
- Sheets: (800 - 2030) x (1500 - 4050) x (1 - 30) mm.
PVC is the most budget option, and also the fastest - installation does not require preliminary surface preparation and can be done on your own.
Advantages of using PVC for the production of plastic aprons:
- Easy to install and maintain;
- Resistance to elevated temperatures and humidity;
- Variety of design solutions: plastic can have any colors, volumetric details, prints or be transparent.
Disadvantages of a PVC kitchen apron:
- Low abrasion resistance;
- Rapid loss of strength;
- Rapid loss of appearance under the influence of light and detergents;
- Water can get into the cracks between the panels, resulting in suitable conditions for the formation of fungus and mold;
- Low fire safety: does not withstand contact with fire;
- May release substances hazardous to health into the air.
Not all panels have this last drawback, so when purchasing, you should ask for a quality certificate and make sure that the chosen option is safe.
Plastic provides the widest possibilities for design, since products made from it can have almost any color, interesting texture, relief surface, drawing or photograph, applied using photo printing. The only problem is to choose the option that suits your interior.
Color
Plastic can have any color and shade - from pastel, light tones to thick, rich colors. Colors are selected based on the chosen interior style and the size of the kitchen. Light colors will help make the kitchen visually larger, while dark colors will “shrink” the room.
The kitchen apron area is the most “dirty” place in the kitchen, so pure white or black is hardly appropriate here. In calm pastel colors, drops of water and other dirt are not so noticeable; the panels do not have to be wiped several times a day.
Drawing
Almost any design can be applied to plastic - its choice depends only on your imagination and design requirements. Small patterns will help make accidental stains less noticeable; they are suitable for small kitchens. In a large room you can use large patterns and designs.
Imitation of natural materials
Plastic panels that imitate natural finishing materials are very popular. They save not only money, but also time during repairs. Laying brickwork or porcelain tiles is expensive and takes a lot of time; installing a panel “under brick” or “under porcelain tiles” can be done on your own and takes only a few hours.
Plastic can imitate ceramic tiles with or without a pattern, popular “hog” tiles in different colors, wooden or stone surfaces. Imitation materials are applied to plastic using photo printing.
Photographic images of various scenes on kitchen aprons are gaining popularity. They make it possible to make the kitchen more interesting, give it exclusivity, photographic pictures remind of favorite places, summer holidays, transfer them to the garden with exotic flowers or add delicious fruits to the kitchen decor.
Kitchen aprons made of plastic with photo printing cost much less than similar ones made of glass. The cost of installation is also lower, and, in addition, the opportunity to change something in the kitchen remains. After installing it, it is no longer possible to make a hole in the glass apron to hang, for example, a rail that is needed, or a shelf for spices. Plastic allows this. Moreover, at first glance, the glass skinal is practically indistinguishable from a kitchen apron made of plastic with photo printing.
Previously, only tiles served to protect the kitchen walls from household pollution, but today you can create an apron with your own hands that is in harmony with the interior of the room. The first task is to decide on the choice of material.
The most common material options for kitchen aprons include:
- Plastic. Installation of this structure is simple, maintenance will also not cause difficulties, and the costs are very affordable.
- MDF. A good choice, inexpensive material that is resistant to fungus and mold.
- Glass. A more expensive option, a novelty in the kitchen interior. You will have to wash it often, and the fragility of the glass will not protect against strong impacts. Tempered glass is a more practical option, but its price is much higher.
- Tile. Inexpensive, unmarked, simple. For conservatives, renovation is an excellent option.
And yet, the first option is chosen more often, besides, plastic also implies the use of PVC panels, sheet plastic and carbonate glass (also a type of plastic). The material is suitable for any style of room, minimal maintenance is required, and in terms of its aesthetic qualities, plastic is not inferior to more expensive structures.
Plastic apron
The plastic apron is remarkable in that it has a fairly high heat resistance, it is in close contact with the kitchen wall, does not accumulate dirt and dust, and is strong in simulating almost any texture.
To install plastic panels (sheets) with your own hands, you need:
- Determine the dimensions of the apron. The height of the table is the basis for calculating the distance from the floor to the base. The apron should be at least 1-2 cm below the table surface.
- The height of the apron ends where the wall cabinets begin. It may not reach them a little.
- Section of plastic panels. The best way to do this is with a hand saw with a fine-toothed file inserted.
- There are different ways to fix plastic on the wall. A quick way is to glue the material, but tearing off its walls with your own hands will then be very difficult. You can also screw plastic onto screws, but it is best to install the screws on a base of metal profiles attached to the wall. It turns out that the apron is removable.
All is ready!
Fastening for plastic panels (video)
Apron made of PVC panels
The installation of this design is practically no different from the previous version. The main thing is that the kitchen walls are smooth. In this case, installation will be as simple as possible.
If the walls are not perfectly even, then you need to prime the surface, seal all the cracks, cover with plaster and re-prime. Then the apron needs to be glued. PVC panels are fixed like this::
- Assembly adhesive is applied to the inside of the protective layer. The glue is spread on the entire surface of the plastic and on the area of the kitchen where it will be fixed.
- The distance between the adhesive strips is about 15 cm. Once the glue is applied, the plastic is applied to the wall; it can be fixed using spacers.
- Additional fixation. The panels can also be attached to the corners with self-tapping screws.
Obviously, it’s not difficult to handle the installation of plastic with your own hands.
Finishing a kitchen apron with PVC panels (video)
Helpful hints
Plastic sheets are cheap, and an economical option for kitchen renovation involves using just such a design. Some knowledge about the characteristics of plastic will be useful:
- Plastic is not afraid of high temperatures, with the exception, of course, of direct exposure to fire.
- The surface of the panels is smooth, so dirt will not get clogged into tight-fitting joints.
- Plastic is not afraid of moisture, so the processes of rotting of the material are excluded.
- But you can’t clean plastic with abrasive products, they are dangerous for it.
- You can wash the plastic with a damp soft cloth or sponge. The detergent should not be harsh, otherwise the surface will be scratched and the design will not be preserved.
- It is easy to pierce the plastic with something sharp, piercing or cutting. Therefore, you should not allow children, for example, to try to pierce the material with something.
- The choice of colors and patterns of panels is incredibly large: monochromatic, extravagant, and imitating natural patterns.
If at some point some panels become boring, you can afford to replace them with more modern ones.
Modern ideas for finishing an apron in the kitchen (video)
Conclusion
For the kitchen, an apron made of a material such as plastic has many advantages. And the main advantage lies in the budget version of such repair work. And by choosing the right color and pattern, you can add nobility to the kitchen wall and modernize it.
Good work!
Kitchen apron made of plastic (photo)
A plastic kitchen apron is an excellent alternative. A fairly inexpensive and quick option for decorating the kitchen, and installation can be easily done by yourself. In addition, you won’t have to live in field conditions for long repairs. All work is carried out with a minimum amount of dust and dirt. If necessary, the old panel is quickly replaced with a new one.
An apron in the kitchen is an indispensable design that will help keep the walls from splashes during cooking. Wallpaper will quickly lose its original appearance, and installation may take a whole week. The most practical solution is to install an apron.
The most practical and inexpensive is plastic. Consumables for installing and securing the panel are inexpensive, and installation will take a short time. The apron is easy to care for. The only thing he is afraid of is scratches. Therefore, it is not recommended to use abrasives and metal sponges when cleaning.
Main parameters of plastic panels for the kitchen
To choose the optimal size of the apron, it is important to determine the location and. The standard distance from the floor surface is up to 85 cm. It is desirable that the tabletop covers the apron by at least 1 cm. Thus, the optimal distance from the surface to the bottom border of the apron is 84 cm.
All other parameters depend on the layout of the kitchen. The ideal height of a wall panel for a kitchen is from 55 cm to 65 cm, depending on the installation of wall cabinets. The upper border of the apron should also be hidden behind the hanging structures at a distance of at least 1 cm.
If there is no provision on the wall surface, and the cabinets are placed along one line, then the apron will be in the form of a rectangle with a width of 57-67 cm. The length of the panel depends on the size of the kitchen.
| Photo | Description |
 | For small aprons, it is not advisable to use photo printing, which will simply hide in a small area. |
 | The option with a calm design for the apron and the entire interior as a whole does not look interesting either. Everything merges. To liven up the interior you need to make one bright accent. |
 | Mirror and glossy surfaces always look advantageous in the interior, but you need to be prepared for frequent maintenance. Any drop will immediately catch your eye. |
Where to buy plastic kitchen panels, prices and photos of finished options
With a ready-made design plan for the apron, you should contact large hypermarkets specializing in construction products. They have the largest selection.
You can buy an inexpensive apron for the kitchen made of plastic in small retail outlets; their price may be lower by 250 rubles per 1 sq. m. m. As a bonus, they can offer delivery of the apron to your address.
The price of the product depends on the method of applying the pattern to the surface and the thickness of the panel. A quality product will cost more. You can apply an individual design, which will also slightly increase the cost of the apron. If your budget is limited, you should choose from ready-made samples in stores.
