When building your own home, the correct organization of the heating system is one of the main processes. Not only comfortable accommodation, but also the amount of expenses for its maintenance largely depends on how competently it will be framed. Therefore, carefully consider the choice of the suitable principle of the heating device and all the parts for completing the equipment in order to ensure its smooth operation.
The principle of creating a heating project is no different from the arrangement of other engineering systems. Sequencing:
How to choose the right energy source?
In this regard, several options are most often used. When choosing the most practical and affordable, be guided by the following criteria:
Popular solutions for the heating system wiring:
The main elements of a water heating system
The entire heating circuit consists of several mandatory elements, the installation of which is carried out in a clearly defined sequence:
How to choose a heating scheme?
There are two basic principles for the structure of the heating system diagram:
Features of the design and operation of a single-circuit system
The principle of operation of such a heating device consists in the serial connection of all elements of the system into one closed circuit. In this case, hot water, which is supplied after heating from the boiler to the pipeline and radiators, flows along the entire line in one direction. 
Given this structural feature of the system, its natural drawback manifests itself in a gradual decrease in the heating level when supplied to each subsequent battery. Therefore, if used in a large room, the rooms at the end of the chain will be significantly slower and will not warm up as well. Another disadvantage is the difficulty of performing repair work if necessary. In this case, it is impossible to restore a separate section; a complete shutdown of the entire system will certainly be required. 
Important! Given these features of the device, it is advisable to use a single-circuit wiring only for buildings with a small area - up to 100 m2. In this case, it will provide high-quality heating with reliable operation.
Important! Despite this list of indisputable advantages, take into account the main disadvantage of the design of a two-pipe wiring - the increased complexity of planning the circuit and installing the entire system. To carry out these works, professional skills in the design, processing and connection of various building materials and equipment will certainly be required. Otherwise, the result will be not only insufficiently correct functioning of the system, but also the occurrence of emergency situations with a threat to the health and life of all residents of the house.
How to properly design a dual-circuit heating system?
If you decide to give preference to this particular type, be sure to decide in advance on the type of line wiring. In this regard, there are two ways:
What to look for when designing?
When creating a heating wiring diagram, carefully consider the following points:
Conclusion
Perform all work on the arrangement of the heating system with extreme caution and care. If you are not confident in your knowledge and skills, be sure to enlist the help of professionals at the stage that seems especially difficult or incomprehensible to you. Only this approach will allow you not to worry about the risk of problems after the completion of all construction and finishing work, and will ensure not only comfortable living in your own home, but also safety.
