Meibes brand equipment for assembling heating systems is distinguished by its reliability, durability and relatively low price, unlike other European manufacturers.
Quick assembly groups allow you to reduce order fulfillment time. The modules are assembled without welding.
Meibes pump group for heating
The ergonomic design of the fittings for boiler rooms and good build quality ensure simple and convenient installation, connection strength and stable coolant circulation. The Maybes pumping group is a ready-made module for piping a boiler room. Suitable for boilers of all types and water heated floor systems from various manufacturers. The equipment is made in a single design, but has different functions.
Meibes quick assembly group differs in configuration. When choosing it, you must use information diagrams.
The units and elements connecting the boiler and the heating system are equipped with flange and threaded connections, due to this, assembly work is carried out faster.
The compact heating pump group is supplied with shut-off equipment that complies with the design standards for heat supply systems. Factory-assembled valves, bypasses, valves, thermometers correspond to each other and are more reliable than those mounted separately.
Meibes pump group has a number of advantages over equipment from other manufacturers:
- Ergonomics.
- Wide range of applications.
- The presence of two thermometers and a stabilizer.
- EPS thermal insulation.
- The presence of a hydraulic arrow with an air separator, an air vent and a sludge separator.
Buy a Maybes pumping group on Terem
The online store will help create a comfortable temperature in your home. The Meibes pump group, provided in various modifications, will ensure quick installation of boiler rooms.
We offer:
- Favorable prices.
- Qualified consultations.
- Additional equipment that will facilitate assembly and expand the capabilities of the heating system.
Buying a pumping group from a well-known brand means reducing the cost of installing equipment and getting a heat supply system that is reliable in operation.
A wide range will allow you to choose exactly the equipment that is required in each specific case.
Description
The Meibes Thermix mixing unit with a thermostatic drive and a Grundfos UPS 15-50 MBP pump is used to organize the heating of a low-temperature heating circuit (warm floor, etc.) with an area of up to 120 sq.m together with wall-mounted boilers, regardless of the manufacturer. The mixer is controlled by a thermostatic head with the ability to regulate the temperature from 25 to 50 °C. The mixing unit is installed directly in the combustion chamber near the hot water boiler by simply connecting it to the supply and return pipelines of the heating boiler. The delivery set includes all the necessary components for installing the module with the boiler. All actuators are combined into one brass block and hidden under insulation to reduce heat loss.
The advantage of this pump group over traditional schemes is the hydraulic independence between the heating circuits, for example, the operation of a heated floor during the off-season and summer time, in the event of a radiator heating shutdown.
The underfloor heating mixing unit for wall-mounted Meibes Thermix boilers allows you to heat up to 120 sq.m of underfloor heating with the possibility of connecting several heating collectors. When installing a mixing group, the working mechanisms are removed from the living area and eliminate the discomfort possible during the operation of the cabinet pumping and mixing unit.
Advantages of the Meibes Thermix mixing unit
- circuit operation in summer and off-season
- installation directly under the heating boiler
- connection to boilers of any manufacturer
- complete connection kit included
- compact design of the mixing block
- built-in hydraulic separator
- circulation pump Grundfos UPS 15-50 MBP
- three way mixer
Description of connection to the Meibes Thermix pump group system
Gas wall-mounted boilers are adapted for direct supply of coolant to a radiator heating system. This mixing unit is connected to the heating pipelines on the boiler and takes high-temperature coolant from the supply line, cools it by mixing cooled water from the return line and ensures circulation of the prepared coolant in the heating pipelines of the “warm floor” system. Between Thermix and the heating loops of the heated floor there are distribution manifolds with flow meters. They ensure uniform distribution of the coolant throughout the heating pipelines.
Connection diagram for the Meibes Thermix mixing unit
Designations:
- Wall-mounted gas boiler with built-in pump.
- Radiators.
- Heating pipes of the "warm floor" system.
- Thermix mixing unit.
- Thermix unit balancing kit (art. 27410.1).
- Cabinet distribution manifold with flow meters.
Specifications
Designations:
- 1 - circulation pump
- 2 - seat valve controlled by a thermostatic head with a capillary remote sensor (scale "1,2,3,4,5" - corresponds to the supply line temperature of 10 °C, 20 °C, 30 °C, 40 °C, 50 °C, respectively )
- 3 – EPP block thermal insulation
- 4 - collet tee
- 4-1 - connection side of the radiator heating system (collet DN 22 mm for copper pipe)
- 4-2 - connection side to the HP 3/4" boiler
- 5 - flexible heat-insulated pipelines for adaptation to any arrangement of heating pipes of a wall-mounted boiler
- 5-1 - flexible stainless pipe DN 20 mm
- 5-2 - flexible thermal insulation
- 6 - brass body
- 8 - immersion sleeve for temperature sensor (temperature sensor included)
- 8-1 - liquid temperature sensor (element from a liquid thermostat)
- 8-2 - capillary connecting the liquid temperature sensor to the thermostat
- 9 - connection pipes for the "warm floor" system HP 3/4" Eurocone
- 10-balance secondary bypass valve
- 11 - Mayevsky crane
- 12 - primary bypass plug (removed when installing balancing kit art. 27410.1)
- 13 - technological plugs (for cleaning channels 15 and 16)
- 14 - primary bypass (when removing plug 12 in combination with the balancing kit, it acts as a hydraulic needle)
- 15 - mixture bypass (supplies cooled coolant to the mixer)
- 16 - secondary bypass (provides additional admixture bypassing the mixer. It reduces hydraulic resistance, the flow through it is adjusted according to the included instructions)
- 17 - dowels for fastening to the wall
- 18 - consoles adjustable in length for wall mounting (move Thermix away from the wall to run heating, hot water and gas pipes underneath it)
Thanks to rapid installation groups, the time for installing equipment is reduced, due to the fact that the equipment can be assembled without any welding work.
Pumping group for heating from Meibes.
This pump group is essentially a ready-to-use module designed to connect boiler equipment. This module can be used with boilers of any type, and it can also be used in water heated floor systems from any manufacturer. The pump group has an impressive design of the fittings for boiler equipment, as well as due to the excellent quality of the assembly itself, easy and convenient installation is ensured, the strength of the connection itself and constant circulation of the coolant itself. All devices are made in the same style, but their functionality differs.Quick installation groups differ from each other in their composition. In order to choose the right group for you, you need to familiarize yourself with the information about it.
Due to the fact that the components, as well as the elements that connect the boiler itself to the heating system, have flanged and threaded connections, assembly is faster.
A small pump group for heating systems already has shut-off valves that are suitable for heating systems. Due to the fact that the parts of the group are assembled at the factory, they are more reliable when compared to those that were installed separately.
The Meibes pump group will have several advantages when compared with equipment from other companies:
· It is more convenient, comfortable to use and technically advanced.· Can be used in various variations.
· Has two thermometers, as well as a stabilizer.
· Has thermal insulation.
· There is also a hydraulic needle, which has an air separator, an air vent and a sludge compartment.
Purchase a pump group from Meibes.
In our online store you can purchase a pump group from Meibes, which will help you create a comfortable microclimate in your home. This group can be in various modifications, thanks to which you can quickly install your boiler equipment. You can find all the information on the pump group you are interested in in the product card.If you have any questions, you can always get a free consultation from our specialists. To do this, simply contact us in any way convenient for you. They will also tell you about additional equipment, thanks to which you can facilitate the installation process, as well as increase the capabilities of your heating system.
To purchase goods, contact our managers, they will tell you the availability of goods in stock (there is a warehouse program, thanks to which you can receive your goods on the day of your order), as well as the price according to your request. We have various promotions and discounts on products.
We have free delivery (more about it in the “Delivery” section), thanks to which you will receive your goods on time, and also will not waste time traveling to the warehouse.
By purchasing a pump group from Meibes, you can reduce your costs for installing equipment, and also receive a reliable heating system.
Thanks to a large selection of products, you will find exactly what is suitable for your specific case.
