The beautiful interior of the bathroom assumes the absence of any extraneous elements, including those that ensure the functionality of the home. Unsightly water details don't fit well with any design. For lovers of aesthetics, there are several effective methods on how to close the riser in the bathroom.
- The sewer riser and other communications laid in an open way should not be closed tightly. It is better not to use capital partitions, choose lightweight materials that can be quickly dismantled in the event of an accident or malfunction.
- Do not build solid structures, but provide windows or doors in them. This method will allow you to periodically check, which will eliminate the need to disassemble the decorative partition for every occasion.
Harmony in the bathroom should not be disturbed by unsightly communications
In order not only to hide the sewer riser, but to reduce the noise level, it is recommended to lay sound insulation, such as mineral wool, between the screen and the pipe.
- When choosing a material for a construction, keep in mind the humidity of the room. Elements that are afraid of moisture must be treated with appropriate solutions and impregnations. If this important point is missed, the decorative screen will turn into an abode of mold, and will quickly lose its attractiveness.
- Before hiding the layout from prying eyes, make sure that the parts are from the same material. This will prevent accidents, reduce depreciation, and extend the service life.
- Cover everything with insulating material to prevent permanent moisture.
Capital method - drywall wall
The easiest way to hide the sewage system running in a technical niche is with a false wall. Use plywood or chipboard as a material, but drywall is considered the best option. For work, one sheet of dry plaster will be enough, it must be green in color - this is how moisture-resistant drywall looks like, suitable for use in wet rooms.
A completely closed technical niche is difficult to see with the naked eye
Before closing the system, it should be put in order: remove rust, strengthen doubtful areas, paint.
The frame of the false wall is made of galvanized profiles (which is preferable) or wooden blocks. When marking the attachment points of the profiles, it must be borne in mind that the distance between the partition and the riser must be at least 3 cm. First, the guide profiles are fixed to the walls, then to the floor.
If you plan to decorate a plasterboard screen with tiles, then it is necessary to provide for a distance between the rack profiles of no more than 40 cm. In cases where there is already ceramic tile on the walls, drilling should be in the tile joints.
Drywall is cut out according to previously prepared drawings and attached to the frame with self-tapping screws. The finished wall is putty and decorated, taking into account their own wishes and general design. To make it easier to work with the inspection door, to make it less visible, use the simple but convenient magnetic mount.
Space saving - conspiratorial box
The wall completely covers the utility part of the room, but significantly reduces the usable area. In order to save space, as well as for sheathing protruding risers, build a conspiracy box by hiding the sewer pipe. It will be a little more difficult to make a frame for the box, since you have to tinker with the corners. A strong corner is easy to obtain from two ud-profiles fastened together, directed with shelves at right angles.
According to the location of the elements that need decor, the protection system can be triangular or tetrahedral. When there are many protruding parts at the bottom, and only a riser is located at the top, you can build a multi-level box. So there will be more space, an additional shelf for storing small items will be formed.
Choose galvanized profiles for the frame. For a separate toilet, where the humidity is significantly lower, it is allowed to use wooden blocks.
Metal profiles must be galvanized, and wooden blocks must be treated with moisture protection agents.
A simple option - protection from plastic panels
Plastic is an ideal option for the construction of a false wall, it is not afraid of humidity, temperature changes, and mold. rot, easy to clean, quickly disassembled if necessary. A significant advantage of the panels is that they do not have to be putty and painted - it is enough to choose a shade and pattern to match the color of the tile.
The color of the panels is easy to match to the shade of the tile
To fix the panels, you need to build the same frame as for a drywall screen. In this way, make a false wall, and a box. Overlay ceramic tiles or applying textured plaster to the plastic coating will not work, for these cases you will have to choose drywall.
The easiest way out is roller shutters
The fastest way to solve the problem of hiding the sewer is by using roller shutters. This design maximizes access to the pipes, while there are no doors cluttering the space. It doesn't take experience to hang blinds, and beautiful blinds don't need any additional finishing.
Plumbing shutters are not only beautiful but also practical
Taking into account the increased demand, manufacturers produce special plumbing shutters, endowing them with soundproofing and heat-saving properties. If desired, it is easy to choose a color in harmony with the decoration of the entire room.
How to get rid of a pipe once and for all
For those who are not looking for easy ways, preferring to do everything thoroughly, there is a cardinal way to get rid of the riser - transferring it to the wall. As a result, the area of \u200b\u200bthe room does not decrease, the flat and smooth wall fits perfectly into the interior conceived by the designers.
The walls will become even and nothing will disturb the harmony
This option is not possible in every home, but only where the thickness of the partitions allows cutting down the grooves. The capital method will require a complete replacement of communications, including passages through the floors, you will have to notify the neighbors, incur additional costs.
Another way to remove unsightly details is to install hanging plumbing. This process requires a professional approach, not always the thickness of the walls will allow it.
Suspended plumbing not only conspires ugly pipes, but also adds lightness to the room
Video how to close the riser
If your own experience is not enough to carry out high-quality repairs, you can always turn to specialists for qualified help. Professionals will quickly evaluate all possible options, carry out calculations and permanently hide the ugly sewer from their eyes in the most suitable way.
Today, open pipes for heating, water supply or sewer network almost never seen. Not in homes, not in public organizations. They are safely hidden behind an elaborate finish. In your own apartment, you also want to create a holistic interior, hiding unsightly communications. How to close the riser? For what moments finishing works pay close attention? What materials are desirable to use?
What and where will we hide?
The main heating, water and sewerage pipes are usually in the bathroom, toilet or kitchen. They are much less common in residential premises. When describing options, materials and stages of work, we will still be guided by frequency cases.
To close the riser in the kitchen, bathroom or toilet, the following work steps must be followed:
- prepare communication networks;
- pick up materials;
- close the riser by installing the frame and base (for example, drywall);
- complete the finishing.
Preparation of communication networks
Before closing the riser in the toilet, we check the health of the sewer pipes.
1. All elements of the network and the riser must be complete, without the slightest cracks.
2. Sewer system should not have a specific odor. If amber is present, then the joints, technological hatches must be treated around the perimeter with silicone sealant.
3. It is better to completely replace old cast iron risers with corroded areas.
4. Places where pipes pass through ceilings must be well sealed with cement.
Advice! It is recommended to install a bypass valve in each branch of the sewer network to a plumbing fixture or to another room. It will not interfere with the discharge of wastewater. But in a clogged situation, it will block the pipe under the pressure of the return flow. That is, nothing will pour into our toilet from the neighbors.
Before closing the riser in the bathroom, we check the quality of the water supply system.
1. The pipes must be free of corrosion marks. If there are any, the rust must be removed and the pipeline covered with a moisture-resistant paint. Badly corroded cast iron pipes it is better to completely replace it with polypropylene.
2. Water supply valves must be reliable and efficient. Threaded connections are complete. To prevent the taps from rusting under the influence of high humidity, the movable joints must be treated with an anti-corrosion compound.
How to close a sewer riser in a toilet: ways
In an ordinary apartment with a separate bathroom, almost all pipes are located in the toilet. Here, as a rule, there are counters, bends are made. And without that small toilet looks like a tech room. And the toilet was here by accident.
There are several ways to hide all this mess.
1. Construction of false walls.
One of the simplest and most common options is to completely close the riser in the toilet with drywall. It must be borne in mind that the false wall will take away somewhere half a meter of free space. The toilet room is already small, and after sewing the riser, not everyone will be able to sit freely on the toilet.
The way out is a hanging toilet. A special frame, on which the plumbing fixture is attached, and the cistern will be hidden behind the drywall. This will save space.
False walls can be not only attractive, but also functional. If you equip free space with shelves, you can store household items there.
Important! Where valves and meters are located, a removable panel must be made. It will allow, if necessary, to take readings of devices and shut off the water.
2. Construction of a square box.
This method is suitable if all pipes are in the same corner. The box saves free space. And with this option, you need to leave the door opposite the meters and valves.
3. Equipment for oblique false walls.
It goes at an acute angle to the side or back wall. It is advisable to turn to this method of masking the riser in the case when thinner pipes branch off from the main pipe. The toilet will have to be moved a little to the side.
4. Creation of a multilevel box.
When the pipes are "scattered on the walls" of the toilet room, it is better to build a multi-level structure. Each of its elements will cover a separate section of the network.
The box can be two-level, three-level. Building it is, of course, more difficult. But space is saved and stands for important little things are obtained.
How to close the drain pipe in the kitchen and bathroom?
To mask a riser in a kitchen or bathroom, all the methods described above are suitable. For the kitchen, you can offer an additional option:
Hide the riser in the kitchen cabinet.
When choosing a headset, you can take care that sewage pipe took place inside the furniture. So the integrity of the interior will be preserved, and access to the network will be provided.
The pipe space free from valves and meters can be equipped with shelves. They seem to hug the riser and create storage space.
Choice of materials
On this stage we follow simple rules:
1. You cannot build strong structures.
It is necessary to leave access to the riser. Sooner or later there will be a need to get inside. Therefore, we immediately abandon bricks, monoliths, etc.
2. It is best to sheathe the riser with light materials.
The best options are drywall or oriented strand board.
3. The material should not deform from temperature extremes and moisture.
Moreover, the frame on which the casing will be attached should not fall on the pipe joints.
The actual work
Everything is checked, invented, materials are purchased. Now the work itself.
1. Installation of the frame.
If an oriented strand board is used for cladding, then the frame is made of wooden bars. For drywall, we use a metal profile. And how to close the riser in the toilet plastic panels? Better on a wooden frame.
- Set vertical guides by level.
- We fasten the transverse lintels to give rigidity. The step is determined by the dimensions of the cladding material, as well as taking into account the dimensions of the inspection hatch.
2. Sheathing.
For deaf structures, drywall is more suitable. Oriented strand board is preferred to create removable cladding. She's tighter. And dismantling will not harm her.
3. Finishing.
Attached to the casing tile with glue, plastic panels with staples. You can just putty and paint.
Can a sewer riser be closed? Yes, you can, the main thing is to do it right. There are several ways to do this job.
- Application of a false wall. This is the most capital method... In order to make it, you need plywood or chipboard. We also recommend that you pay attention to drywall. Before installing the floor, completely remove all rust and paint the structure. Use galvanized profiles to frame the false wall. Fix the profiles to the walls, then to the floor. There should be a distance of 3 cm between the partitions. The drywall is fixed to the frame with self-tapping screws. A sewer pipeline is hidden in the box. This design can be three-sided and four-sided. Sometimes multilevel boxes are mounted. This method is the best option if you are closing the riser in the bathroom. If you have a separate toilet, you can use wooden blocks instead of galvanized profiles.
- Plastic panels. This is very practical material, which is not affected by external irritants such as humidity, temperature changes, mold. They are also easy to disassemble and assemble, there is no need to paint and putty. It is enough just to pick up plastic panels of the required color. You will need to build a frame for the wall and box, lay the panels.
- Roller shutters. If you do not want to waste time on complicated methods, you can close the sewer pipes with roller shutters. They do not require finishing, they are easy to install, as these are ordinary blinds, and they provide maximum access to the riser. Now there are special designs, for example, with noise insulation and heat saving.
- A box made of plasterboard or plastic. Use a metal profile and simply sheathe it with plastic.
- Household wardrobe. This is a great option for masking valves, filters, meters and pipes and storing cleaning supplies, household items. Make a frame of wooden blocks, fix it with dowels to the walls of the toilet, install hinges and doors. For the manufacture of the cabinet, laminated chipboard and plywood are suitable.
Bookmark this site
- For finishing work, you will need moisture-resistant drywall. As additional protection, drywall is treated with linseed oil from the inside. To prevent the appearance of mold, before installing wooden blocks, they must be treated with an antiseptic.
- All irregularities, cracks and crevices in the walls are sealed with polyurethane foam.
- A tape measure is used to measure the future structure.
- Based on the measurements, a schematic drawing of the structure is drawn up.
- 2 profile guides are mounted on the wall. Minimum distance from profiles to pipes should be 5 cm.
- Transverse profiles are installed taking into account the openings for access to communications.
- Drywall sheets are cut according to the dimensions of the surfaces. Fastening to the frame is carried out using self-tapping screws.
- Manufactured and then installed on special hinges or hinges hatch (door) for access.
- The finished box is putty and primed.
- The finished structure is covered with ceramic tiles.
Plastic panels are also perfect for decoration. All stages of work are identical to work with drywall. This type of finish is more convenient, since it does not need to be processed with insulating, finishing and other interior materials. \\
Results. Beautiful design solutions are not always as good as they seem at first glance. In order not to have to destroy a beautiful expensive structure, you should take into account in advance possible repair during operation. Otherwise, it will be quite difficult to recreate the old interior using the same materials.
