Today, flexible pipes for connecting plumbing fixtures make our life easier than it seems at first glance. So, these products are used to properly organize the space when installing water appliances. It is with the help of these devices that it is possible to install a washing machine or other equipment not near the pipeline, but much further from it.

An important part of the operation of any appliance in the house that uses water is to connect it to the sewage system, where the used water flows. It is for this that a special type of flexible connections is used - sewer.

Sewer flexible connections: purpose and types

Sewer flexible pipes are non-pressure flexible pipes that must not withstand the highest water pressure.

Today they produce eyeliners different types:

• · Reinforced;
• · Rubber;
• · Plastic.

Reinforced flexible pipes for sewers - these are analogs of connections for connecting water devices, but their main difference is that they have a larger radius. They are made of rubber and covered with braiding from steel threads.

Rubber flexible pipe for sewerage used for the drainage system of dishwashers and washing machines. The radius of the rubber liners is small, the service life is about 7-10 years.

Plastic eyelinerstoday they are considered the most versatile solutions for removing wastewater from water devices. These devices look like corrugated polyvinyl chloride pipes. Their absolute advantage is that the pipe can be stretched, increasing its length.

ELKA

Today ELKA is a famous manufacturer of eyeliners in our country. The company was founded in Russia, but in 2002 its production was moved to the PRC. Now the company delivers to 38 countries of the world, including Russia, Japan, Czech Republic, etc.

If you live in Moscow, in our Santekhkomplekt online store you can buy inexpensive sewer pipes from a reliable manufacturer ELKA. We work with all our partners directly, bypassing intermediaries.

We are accustomed to comfort, so few of us will be satisfied with the lack of gas, sewage and electricity in own home... Especially if it is supposed to live in it permanently. That is why the supply of communications is an important stage, on the effectiveness of which the quality of life depends. But you need to be prepared for the fact that this business is costly, both in terms of money and time.

Resolving issues through the HOA

You are very fortunate if you have built a house on a plot that is located in a village with an active homeowners association. If it resolved the issue of communications, then you do not have to act individually - it will be enough to make a contribution of 250-350 thousand rubles. and all questions will be settled. But it often happens that problems have to be solved by yourself, tk. building plots are not always bought with an eye on the need for subsequent communications. And in such cases, you need to be prepared for situations when it will not be possible to connect electricity and gas for no amount of money - the output will only be autonomous power supply.

Water supply and sewerage

If there is a central water supply system, water supply can be done in a fairly short time for about 50-70 thousand rubles. But this means that in a warm season you risk being left without water or its pressure will be extremely low due to active use for irrigation. Therefore, it is prudent to rely on the device of an autonomous well. Depending on the flow rate of the well, its depth and a number of other parameters, water supply can cost from 70 to 150 thousand rubles. On average, when drilling wells, the calculation is about 2,000 rubles. per meter. Here you need to add the need for, supplying pipes to the house, installing special equipment... Equipment autonomous sewerage and assembly work will cost approximately 50-150 thousand rubles.

Electricity

Is there an electric pole not far from your site? If you think the solution with electricity is to run a wire straight from it, then you will be greatly surprised by the answer. The fact is that because of you, neighbors may suffer, in which, under certain circumstances, voltage drops will be observed. Everything depends on the power supplied to each of the objects, so do not be surprised if you are offered to pull the wire from the transformer substation with all the ensuing costs. The order of our actions:

• find out who provides electrical power in your area;
• draw up technical specifications for the object with the calculation of power;
• buy out the capacity taking into account the tariff rate per kW (in the region of 15-25 thousand rubles - for houses up to 20 kW);
• draw up a project;
• pay for installation and connection services (prices are set individually)

Gas

It is possible to consider the option of connecting gas only in the case of gasification of a nearby village. In such a situation, the total cost of the work will be approximately 100 thousand rubles. What does that require:

• get TU and spec. permission in local networks;
• agree on the TU;
• install gas equipment in the house;
• draw up a project;
• install a gas supply system

The cost

The total cost of connecting communications is determined by the following factors:

• location of the site and its distance from settlements (NP);
• condition of operating networks in NP;
• the depth of the ground aquifers and the number of companies providing well drilling services;
• type of sewer or

For this reason, the exact cost of work can be found only when considering a specific situation.

Related Videos

What is the most important engineering communication? In fact, each is important for human life support. AND sewage supply to the houseundoubtedly refers to those events that will help organize the quality of living and stay of people in the building at the proper, high level. For a high-quality operation of any network, the installation work must be performed by highly qualified specialists.

The main requirements of owners for modern sewage systems are good jobas well as cost savings. In our construction and installation company "Savard" you can always order sewer supplythat will meet all your requirements, wishes, financial opportunities. Our employees equip any type in a wide variety of buildings.

Bring the sewage system to the site

The good news is that by installing it once, you will no longer depend on utilities. If you need lead the sewer autonomous type, then in our organization you will always be welcome. Our experts will help you choose cleaning devices, make calculations for them, and recommend materials. In other words, they will do everything to make it very easy for you to decide on this issue.

After agreeing on all the issues, our installers will take over the installation activities. This stage is very important. The quality of functioning of the future system also largely depends on it. But sewage is not the only issue we are helping to solve. You can always order water supply from us. We equip plumbing and beauty with comfort in your home.

Sewerage connection to a country house

If for some reason sewer connection independent type is not included in your plans, then we can always connect your home to a centralized sewer communication. However, it still wins a lot. In it, special bacteria often perform the role of a purifier, thanks to which the drains are very well cleaned.

It is possible with the help of special devices for deep biological treatment or a septic tank. Select all components additional ways disinfection of effluents, you can consult and make an order in our engineering and installation organization.

How and how much does it cost to install the sewage system?

Actually, in any system, calculations are carried out before installation. Also with. Before that, how to bring the sewer, it is necessary to carry out project activities, as well as coordination in the authorities. The project usually includes absolutely all calculations. This is the type of system, and the materials, and the pipe layout.

We are often asked about how much does it cost to run a sewer... There is no clear answer, and this situation is justified. After all, everything depends on a number of factors. First of all, this is the type of sewage system, the materials from which it is made, all its constituent elements. Definitely not cheap. However, we are not asking for unthinkable prices.

Sewerage supply to a country house or cottage

Ours is acceptable for all Muscovites and residents of the region. And if someone offers you the whole range of services suspiciously cheap, know that they want to deceive you and perform poor quality, illiterately staffed, unfinished or untested sewer network... Be carefull. Contact the reliable professionals "Savard"!

Just leave a request and get a great offer

Send message

The best price for sewerage installation in a private house!

Installation of sewerage systems country house, cottage - prices

When deciding to build a cottage, you strive to improve comfort. It implies not only spacious housing, but also its complete provision with engineering systems. Not the least among them is the sewerage system of a private house, designed to remove drains outside of it. The scheme of the system depends on the layout and number of storeys of the cottage, as well as on the number and location of premises in which water supply and, accordingly, drainage are provided. The company "Cottage-Expert" performs installation of sewerage systems in Moscow and the Moscow region at objects of any complexity. As part of the work, it is proposed:

• Project development;
• Purchase and delivery of materials;
• Professional high-quality installation;
• Installation of a non-return valve and / or waste pipes;
• Noise isolation sewerage system;
• Connection to external sewerage;
• Commissioning and commissioning of the system.

We try to provide all clients with convenient conditions for payment, we practice a flexible system of discounts for the installation of sewage systems. The cost of installing the system depends on the cost of materials and the amount of work, the prices are shown in the table:

The cost of work on the installation of the sewerage

Name of works	The cost of work
Sewerage design works in the cottage
Creation of a project for internal sewerage of a cottage	RUB 950 / point
Dismantling work
Dismantling of cast iron systems	800 RUB / rm
Dismantling the PVC system	RUB 250 / rm
Dismantling the steel drain	RUB 500 / rm
Dismantling of PP and MP pipelines	RUB 300 / rm
Dismantling of baths, sinks, bidets, toilets	RUB 1500 / point
Sewerage works in the cottage
Sewerage system installation (pipeline laying to a sanitary fixture in isolation or without isolation)	2900 rub / point
Turnkey installation of a septic tank	from RUB 25,000
Gasket outdoor sewerage from the septic tank	RUB 350 / rm
Sewerage laying	1400 rub / point
Installation of risers with revision, plugs, tees	1300 RUB / rm
Installation of plumbing fixtures	from 3000 rub.
Installation of a ladder	2300 RUB
Installation of a riser, lounger	2500 RUB
Start-up and start-up works
Commissioning of sewerage systems	from 1800 rub.

Internal sewerage system diagram

The sewerage system diagram, as a rule, is developed at the design stage of the cottage and is included in the set of design and technical documentation for the facility. Nevertheless, the owners of the house can, for one reason or another, change the purpose of the premises, and then the corresponding changes are made to the scheme. It also happens that a house is rebuilt, and the decision to equip it with a sewer system comes after the completion of the work - in this case, the project is developed anew.

The internal sewerage system includes:

• Plumbing fixtures;
• Sanitary fittings;
• Risers;
• Fan pipes or aeration (non-return) valves;
• Discharge pipes;
• Fittings (tees, crosses, bends, revisions) for connecting system elements and maintaining it.

Lines are designed to direct wastewater from plumbing fixtures into risers, which in turn are connected to outlet pipes - the latter are used to transport wastewater to the outer part of the sewer system. Fan pipes are used for ventilation of risers: they are led out to the roof through the roof and serve to remove unpleasant odors. Alternatively, check valves that allow air to pass in only one direction can be used. Their task is to eliminate the gases that arise and compensate for the pressure in the system. Such an aeration valve can be installed in the upper end of the riser without installing a roof penetration.

Pipe selection

For the sewage system, pipes made of cast iron, polypropylene or polyvinyl chloride (PVC) are used. Each material has its own advantages and disadvantages.

Cast iron pipes : strong, durable, have good sound insulation, can withstand heavy loads. But they are heavy and brittle, and the inner surface is prone to corrosion, which creates bumps that can cause clogging. There is one more drawback - the price. Installation of sewage from cast iron pipes will cost much more than other materials.

Polypropylene pipes flexible and lightweight, withstands high waste water temperatures. They are most often used for the device of the internal sewerage system of a private house. The only requirement is the obligatory fastening of pipes to the walls by means of special clamps with a pitch of 50 - 100 cm. There are practically no drawbacks.

Polyvinyl chloride (PVC) pipes lightweight, inexpensive and durable, but unfortunately not well tolerated high temperatures... In addition, they are not flexible - they crack when trying to bend. They are usually used for external sewerage devices.

Indoor sewage systems typically use 40mm or 50mm pipes for bathtubs, showers, sinks and sinks. Diameter 100mm is selected for toilet bowls and collector pipes (at the intersection of sinks, bath and shower outlets). The diameter of the riser pipes depends on the estimated flow rate, which is taken as the sum of the maximum second flow rates of all sanitary appliances. This value is called the required throughput riser. When choosing a pipe, its material, diameter and angle of connection of floor bends, and the presence of ventilation are taken into account. The corresponding tables can be found in SNiP 30.13330.2012.

Basic rules for installing sewage

Sewerage systems of individual houses are usually self-flowing. Therefore, during the installation process, the pipes must be provided with a slope, the angle of which depends on their diameter. So for bends with an inner diameter of 50 mm, the minimum slope angle will be 3 cm per one running meter, for bends with a diameter of 100mm - 2cm per meter. In the course of connecting additional devices, the diameter of the horizontal pipes suitable for the riser may increase. Toilets should be located closest to the riser - ideally no further than one meter from it.

The connection of pipes and risers is carried out by means of oblique tees, each riser must be equipped with a revision in case of a blockage. It is also recommended to equip horizontal sewer pipes with a similar device (cleaning) after each turn. Installation of the cottage's sewerage system requires the presence of a fan pipe or an aeration valve in the system.

A lot of turns and seams are best avoided - these are potential sites for blockages and leaks. During installation polypropylene pipes their sockets are directed against the movement of drains. Chips, cracks and other pipe defects, as well as shortening of sockets are not allowed.

Professional installation of the sewerage system in the cottage allows you to provide aesthetics and a level of comfort unattainable in apartment building... So, for example, horizontal pipes top floor can be hidden between the floor slabs and the ceiling structure of the lower one, and the sounds of drains can be removed with sound insulation. Our company employs qualified builders and finishers who will hide visible system elements in boxes. Call "Cottage-Expert" and our specialists will do their best to ensure reliable and comfortable operation of the sewer system in your home.

Sewer systems are among the most important communications that any home and organization should have. Often we do not even think about arranging such systems and simply use well-established and reliable networks. But do not forget that the excellent functioning of any system is a painstaking work of specialists.

Our engineering and installation company "Seti Service" deals with all issues related to autonomous type in private buildings. Produced by our employees, sewer connection will take place in due time and in compliance with all norms and requirements. The further operation of the installed system will be optimal in terms of economy and efficiency.

Our experts will make all calculations for the subject and supplies... And, of course, they will deal directly with the installation. The installation of a sewerage system is very important, it is difficult to overestimate the importance of this utility network. Leave your request for and live in a house where there are all the benefits of the modern civilized world.

Sewerage supply of a country house

Development and sewer supply individually used when there is no possibility of connecting to a centralized network. Individual sewage systems use a special type of bacteria to purify sewage water, which carry out biological purification.

In country cottages, sewerage systems are performed in the form of separate treatment plants. They carry out the entire cleaning procedure. Sewerage equipped with autonomous typeusing a septic tank. Employees of our Seti Service company can help you in choosing the entire set of equipment, drawing up project documentation and installing purification systems.

In addition to sewerage systems, we also deal with design and and water supply issues, as well as all the rest engineering systemsthat you may need in your home or apartment. We carry out all work on time, at the best prices and with high quality. In this case, all work and equipment are covered by the warranty.

How and how much does it cost to bring the sewage system

Before, how to bring the sewer, our employees perform all design work without fail and make the necessary calculations. The sewer system design should provide for everything: from the type of system to its specific elements. Only specially trained people can be engaged in the development of the project. After all, such a system is very important and complex.

We invite you to bring the sewerage system with our help not only to residents of Moscow, but also to the entire Moscow region:

• we bring
• - a frequent subject of requests from our clients from this wonderful city
• design and or Domodedovo, as well as in other cities of Moscow region - what we do professionally!

To answer the question how much does it cost to run a sewer, it is necessary to add up the cost of the equipment itself, consumables, the cost of project development, installation work. We will not dissemble by claiming that you will pay literally three kopecks. Yes, it is a complex system that requires certain costs.

However, we can say with confidence that it is we, the engineering and installation company "Seti Service", that offer all our clients only the optimal combination of prices and high quality. We work individually with each client and object. Therefore, in cooperation with our company, by ordering or developing any other engineering network, you can be sure of the successful completion of the business you have begun!