The Steel World company provides services for the installation of fences and barriers of any complexity. When installing the fence, we follow a clear technical requirements... This allows us to guarantee the high quality of the work performed and the minimum deadlines.
We preliminarily calculate the cost of installation, taking into account the volume of the metal structure of the fence and the remoteness of the object, we rigidly fix the cost of installing the fence in the contract, and this cost will not change either before the start of installation, nor during, and even more so after the end of work. The constant maintenance of communication between our managers and our installation teams allows us to quickly respond to emerging issues and nuances and quickly resolve them.
The first step is to punch through a wall or fence to place the stems that will hold the Concertina. It is ideal to stick every 5 meters. After drilling, insert the bushings that accompany the kit and complete the rod installation. Finally, apply the bottom handle and tighten securely so that it fits snugly against the wall or railing.
Watch installation videos
Finish fixing, fixing and cooking. A few years ago it was customary to see very “rustic” methods of protecting invaders' homes. All of you may have seen these shards of glass stuck in the walls of houses or a bunch of barbed wire. Well, the truth is that the bold sacrifices of the thieves have made them become completely ineffective methods. After all, the small cut in their hands was worth what they could steal. It was then that security methods put on innovation and began to come up with parts and products that were more effective than the old ones, and the concern's fence was the most effective replacement for barbed wire.
Our company also acts as a fencing or fence installation contractor. If you bought all the fencing components directly from the manufacturer and you need a high-quality fence installation - feel free to contact us. We will carry out the installation of your fence even though you did not purchase it from us.
Installed on high walls, this fence makes any thief think twice before attempting to invade your land. Consignment Fence - Cutting material used to provide more protection for walls and fences. For those who do not know that concertina is a coiled wire made in the form of a snail or a spiral, which has sharp and piercing knives. It should only be installed in high places, such as the top of walls or fences, or in areas that are not within the reach of an unsuspecting pedestrian or any child.
If you want to save a little on the installation of the fence,you can independently purchase and provide with all the necessary materials that are necessary for the installation of the fence, ordering only installation work from us. In this case, we will provide you full list materials that will be needed by us, indicating their quantity. By the materials required for installation, we mean concrete, sand concrete, crushed stone, sand, reinforcement, and so on.
Installation of fences for construction sites
This type of fence is also known as hedgehog fencing and protection. It is considered the most modern and most efficient version of the famous barbed wire. Because barbed wire only makes a few small holes, the harmonica can cause deep cuts.
This name comes from the fact that the fence, once erected, resembles much of the accordion-concertina shape. It is made of galvanized steel, i.e. heavy galvanized steel or stainless steel, depending on the model. This fence still has a high-strength inner wire that serves to support the spirals. And all over the fence, you can find super sharp and sharp blades.
When ordering the installation of a fence from us, you get not only high-quality performance, but also an honest relationship between the Customer and the Company.
The cost of installation of fences and barriers:
| Name | unit of measurement | Cost, rub. | Note |
| Installation of fences up to 2.5 meters high with concreting of pillars | r.m | 600 | |
| Works on installation of fencing up to 2.5 meters high with butting of poles | r.m | 600 | Including the cost of using machinery and equipment. The cost of materials is not included. |
| Installation of fencing from 2.5 meters high with concreting of pillars | r.m | 750 | Including the cost of using machinery and equipment. The cost of materials is not included. |
| Materials required for the installation of the fence when concreting or rubbing poles * | r.m | 200 | The cost of materials with delivery to your facility. |
| Dismantling the old fence | r.m | from 150 | Without cleaning and removing the dismantled fence. If it is necessary to export and dispose of - it is calculated individually. |
| Installation of a wicket | 1 PC. | 3 500 | |
| Installation swing gates | 1 PC. | 5 000 | Including the cost of all necessary materials. |
| Installation and commissioning sliding gates up to 6.0 meters wide | 1 PC. | 35 000 | |
| Installation and adjustment of sliding gates with a width of 6.0 meters | 1 PC. | 45 000 | Including the cost of arranging the foundation, all necessary materials, assembly and adjustment of the gate. |
| Device monolithic foundation under the fence (strip foundation) | r.m | from 3,500 | Including the cost of using equipment and all necessary materials. |
| Installing guardrails on flanges | r.m | 550 | Including all necessary consumables. |
| Installing an additional security barrier | r.m | 200 | Including the cost of using the equipment. |
* These rates are valid for objects located within 100 km from the Moscow Ring Road. The calculation of the installation cost for a specific site may differ from the quoted prices. There is a system of discounts depending on the volume of work performed.
Thus, in addition to the physical barrier created by harmony, there is also a psychological barrier that acts to deter intrusions given the product's great potential to cause serious injury to those at risk. 
The price of the fence varies depending on the size of the place in which it will be installed, the selected model of the fence and also depends on the region.
We averaged the prices on well-known websites in the country and got the following values. Remembering that these values \u200b\u200bdo not include the cost of labor to install. As crime haunts people's daily lives more and more, investment in security is becoming an important and important part of families. We are exposed to thugs all over the world, even in our own homes - a place that was once considered safe - which is no longer a safe environment today.
** We do not purchase materials for making butting of poles for objects with a total length of the fence less than 50 meters. Otherwise, the cost of materials and delivery is negotiated individually.
Preparatory stage
On preparatory stage it is necessary to determine the perimeter of the future fence, measure and mark it, as well as calculate the number of sections and supplies.
All obstacles must be removed from the perimeter: the remains of the old fence, stones, vegetation. Level the area if necessary. On large differences in the relief, you can mount the fence with steps.
Installation of fence posts
Depending on the climatic characteristics of the region and the condition of the soil, the technology for installing the pillars is selected:
- hammering;
- backing up;
- installation on a strip foundation;
- concreting in the ground.
In the case of installing a fence on heaving soil, the pillars are hammered into the ground by 1.2-1.5 m. Backfilling is used on soil with seasonal heaving: holes up to 1500 mm deep and 200 mm in diameter are drilled in the ground, after which the pillar is filled with stones, crushed stone or other materials. The concreting technology is used on stable soils: holes are drilled in the soil with a hole depth of 1500 mm and a diameter of 200 mm using a pit auger, then pillars are placed in them and the holes are filled with concrete. As wooden fences have a fairly low weight, the construction of a strip foundation is not required and installation work is carried out quickly.
Installation of a picket fence
Two wooden logs, which are bars of 40x80x2500 mm, are attached to the posts with the help of special fasteners, for which the markings are made on the posts beforehand. The lags are fixed with self-tapping screws. The fence board is attached to the joists with a clearance of 40 mm. Installation of finished sections is also carried out using fasteners for wooden logs.
Installation of wooden fences
The company installs wooden fences in Moscow, the Moscow region and neighboring regions. Professional installation wooden fence, made by qualified specialists of our company, will ensure the impeccable quality and long service life of your fence.
In general, an electric fence works like this: it is of course installed by trained technicians and then can be started with a remote control or a key. Therefore, when the fence is breached, it shoots, in addition to the shock to the invader's body, one or more sirens that warn residents of the invasion.
Another "mistake" that some bad guys still believe is that if they cut the wires, the electric current breaks. Many people wonder if electric fences can kill a person. The answer is NO, they cannot kill, because the released charge only causes "fright" in the invader.
Installation of wooden fences - solid
2nd stage. Installation of pillars
- hammering of support pillars;
- backing up posts;
- concreting of pillars;
Mounting wooden picket fence
Installation of kindergarten fences
The shock pulse is pulsating, meaning it is applied every 1.2 seconds and lasts only 1 millisecond. A millisecond is a short time, but it is enough to scare the thief and numb his hands for a few seconds without further damage. This is because the impulse emitted by the electrical fence, although high - from 000 to 000 volts - is a low current, i.e. the blow really should only intimidate the invader, who, contrary to the opinion of some people, does not stay there glued to the wires.
If you are looking for the safety provided by electric fencing for your home, you need to contact fence and emergency companies that are experts in installing this equipment. Installation is done by fixing the wire to the fence and an electric shock device.
Installation of corrugated fences
1st stage. Preparing for installation
At this stage, the perimeter of the site is measured, determining the length and height of the future fence. Then calculate required amount fence posts and accessories. The installation perimeter is cleared of obstacles and leveled. On the site, markings are performed, marking the installation locations of the pillars and the entrance group.
2nd stage. Installation of pillars
Fence posts from shaped pipe installed according to the markings made on the site in one of the following ways:
- hammering of support pillars;
- backing up posts;
- concreting of pillars;
- installation of pillars on a strip foundation.
The choice of the method for installing the pillars depends on the type of soil on the site.
On heaving soils, driving is performed: the pillars are driven into a depth of 1200 mm. Soils with seasonal heaving require the use of backing: a motor-drill is used to drill holes with a diameter of 200 mm to a depth of 1200 to 1500 mm, the pillars are installed in the holes and tamped with rubble. For concreting, holes are drilled with a diameter of 200 mm and a depth of 1500 mm, pillars are installed and poured with concrete - this installation method is used on stable soils. Strip foundation significantly increases the strength and stability of the fence. To install the fence in this way, they dig a trench with a section of 250x500 mm, holes are drilled into the trench for the posts. A reinforcing cage is built in the trench, metal posts for the fence are inserted into the holes, then the structure is filled with concrete.
Installation of a wooden picket fence
Wooden logs are attached to the installed pillars using fasteners, for which the pillars are first marked. The logs are fixed with self-tapping screws, the fence boards are mounted on the logs. Installation of the board is carried out without gaps, the joints are closed with slats 100 mm wide. Lastly, the strips are mounted on the top and bottom of the section, and then the cover strip. You can also attach ready-made fence sections to the posts.
Construction of wooden fences
The company Masterzabor assembles fences from a wooden picket fence in Moscow and the Moscow region. Competent installation of a wooden fence, professionally performed by qualified specialists, ensures high quality and long service life of the fence. A solid fence will shelter the site from prying eyes, as well as protect it from wind, dust and noise.
An important tip for installing fences, barriers and walls is that in an urban environment, the laid wires must be inaccessible to a pedestrian to prevent innocent bystanders from accidentally discharging their charge when they collide with electrical wires. Therefore, it is recommended that the fence should be higher than 1.8 m in height.
Installation of fences for schools
Please read carefully the following description of how to install electrical fences. The price of electric fencing varies depending on the size of the place where it will be inserted. Recalling that this value is added to the work of the installer.
Installing a siding fence
1st stage. Preparing for installation
At this stage, the perimeter of the site is measured, determining the length and height of the future fence. Then the required number of fence posts and accessories is calculated. The installation perimeter is cleared of obstacles and leveled. On the site, markings are performed, marking the installation locations of the pillars and the entrance group.
2nd stage. Installation of pillars
The fence posts from the profile pipe are installed according to the markings made on the site in one of the following ways:
- hammering of support pillars;
- backing up posts;
- concreting of pillars;
- installation of pillars on a strip foundation.
The choice of the method for installing the pillars depends on the type of soil on the site.
On heaving soils, driving is performed: the pillars are driven into a depth of 1200 mm. Soils with seasonal heaving require the use of backing: a motor-drill is used to drill holes with a diameter of 200 mm to a depth of 1200 to 1500 mm, the pillars are installed in the holes and tamped with rubble. For concreting, holes are drilled with a diameter of 200 mm and a depth of 1500 mm, pillars are installed and poured with concrete - this installation method is used on stable soils. The strip foundation significantly increases the strength and stability of the fence. To install the fence in this way, they dig a trench with a section of 250x500 mm, holes are drilled into the trench for the posts. A reinforcing cage is built in the trench, metal posts for the fence are inserted into the holes, then the structure is filled with concrete.
Installation of a wooden picket fence
Wooden logs are attached to the installed pillars using fasteners, for which the pillars are first marked. The logs are fixed with self-tapping screws, the fence boards are mounted on the logs. Installation of the board is carried out without gaps, the joints are closed with slats 100 mm wide. Lastly, the strips are mounted on the top and bottom of the section, and then the cover strip. You can also attach ready-made fence sections to the posts.
Construction of wooden fences
The company Masterzabor assembles fences from a wooden picket fence in Moscow and the Moscow region. Competent installation of a wooden fence, professionally performed by qualified specialists, ensures high quality and long service life of the fence. A solid fence will shelter the site from prying eyes, as well as protect it from wind, dust and noise.
Installing parking fences
To do everything in the best possible way, here are the steps that await you. Check regulatory aspects and breakage risks while digging, material positions and fence selection patterns that match your expectations and budget, determine the installation method appropriate for the soil type, trust the Contractor's mandate, or do some or all of the work yourself. Check with your municipality's planning department to find out what materials and styles are allowed, which can vary from city to city, district to district, and even street to street! 3 feet to the front of the house and 6 feet to the back. If you have a pool, please ask: Is the safety standard subject to AND don't become the next person to cut underground cable or drill pipe! There are also minimum distancesto respect the boundaries of the earth. ... Determine the exact line of your fence on the ground.
Installation of polycarbonate carports
1st stage. Preparing for installation
At this stage, the perimeter of the site is measured, determining the length and height of the future fence. Then the required number of fence posts and accessories is calculated. The installation perimeter is cleared of obstacles and leveled. On the site, markings are performed, marking the installation locations of the pillars and the entrance group.
2nd stage. Installation of pillars
The fence posts from the profile pipe are installed according to the markings made on the site in one of the following ways:
- hammering of support pillars;
- backing up posts;
- concreting of pillars;
- installation of pillars on a strip foundation.
The choice of the method for installing the pillars depends on the type of soil on the site.
On heaving soils, driving is performed: the pillars are driven into a depth of 1200 mm. Soils with seasonal heaving require the use of backing: a motor-drill is used to drill holes with a diameter of 200 mm to a depth of 1200 to 1500 mm, the pillars are installed in the holes and tamped with rubble. For concreting, holes are drilled with a diameter of 200 mm and a depth of 1500 mm, pillars are installed and poured with concrete - this installation method is used on stable soils. The strip foundation significantly increases the strength and stability of the fence. To install the fence in this way, they dig a trench with a section of 250x500 mm, holes are drilled into the trench for the posts. A reinforcing cage is built in the trench, metal posts for the fence are inserted into the holes, then the structure is filled with concrete.
Installation of a wooden picket fence
Wooden logs are attached to the installed pillars using fasteners, for which the pillars are first marked. The logs are fixed with self-tapping screws, the fence boards are mounted on the logs. Installation of the board is carried out without gaps, the joints are closed with slats 100 mm wide. Lastly, the strips are mounted on the top and bottom of the section, and then the cover strip. You can also attach ready-made fence sections to the posts.
Construction of wooden fences
The company Masterzabor assembles fences from a wooden picket fence in Moscow and the Moscow region. Competent installation of a wooden fence, professionally performed by qualified specialists, ensures high quality and long service life of the fence. A solid fence will shelter the site from prying eyes, as well as protect it from wind, dust and noise.
To do this, inspire surveyors: use a certificate of the location of your property. Take advantage of this to make sure easements impose restrictions on you. Also consult the neighbors of your project, together with them. You don't want to put up with the famous “closing chicanes” once it's installed!
Independent people will also prefer a design that they can repair in case of breakage or wear and tear, which some materials do not allow. Consider decorative steel or aluminum railings among your options.
- An open chain guard may be sufficient.
- Could you add value and beauty to your property?
- Do you want to protect yourself from prying eyes?
Installation of a fence from a mesh netting
1st stage. Preparing for installation
At this stage, the perimeter of the site is measured, determining the length and height of the future fence. Then the required number of fence posts and accessories is calculated. The installation perimeter is cleared of obstacles and leveled. On the site, markings are performed, marking the installation locations of the pillars and the entrance group.
2nd stage. Installation of pillars
The fence posts from the profile pipe are installed according to the markings made on the site in one of the following ways:
- hammering of support pillars;
- backing up posts;
- concreting of pillars;
- installation of pillars on a strip foundation.
The choice of the method for installing the pillars depends on the type of soil on the site.
On heaving soils, driving is performed: the pillars are driven into a depth of 1200 mm. Soils with seasonal heaving require the use of backing: a motor-drill is used to drill holes with a diameter of 200 mm to a depth of 1200 to 1500 mm, the pillars are installed in the holes and tamped with rubble. For concreting, holes are drilled with a diameter of 200 mm and a depth of 1500 mm, pillars are installed and poured with concrete - this installation method is used on stable soils. The strip foundation significantly increases the strength and stability of the fence. To install the fence in this way, they dig a trench with a section of 250x500 mm, holes are drilled into the trench for the posts. A reinforcing cage is built in the trench, metal posts for the fence are inserted into the holes, then the structure is filled with concrete.
Installation of a wooden picket fence
Wooden logs are attached to the installed pillars using fasteners, for which the pillars are first marked. The logs are fixed with self-tapping screws, the fence boards are mounted on the logs. Installation of the board is carried out without gaps, the joints are closed with slats 100 mm wide. Lastly, the strips are mounted on the top and bottom of the section, and then the cover strip. You can also attach ready-made fence sections to the posts.
Construction of wooden fences
The company Masterzabor assembles fences from a wooden picket fence in Moscow and the Moscow region. Competent installation of a wooden fence, professionally performed by qualified specialists, ensures high quality and long service life of the fence. A solid fence will shelter the site from prying eyes, as well as protect it from wind, dust and noise.
Treated wood is the most affordable and popular. Red cedar, for its part, is in demand for its richness and durability thanks to its natural resins. Advantages: affordable, various shapes and colors, warm appearance, the ability to independently build and repair the fence.
Disadvantage: periodic maintenance must be provided even with treated wood. Chain fence. The chain link fence is made of vinyl coated galvanized wire, available in different colors. The poles are made of enamelled steel or galvanized steel.
Installation of a fence for a summer residence made of wood
1st stage. Preparing for installation
At this stage, the perimeter of the site is measured, determining the length and height of the future fence. Then the required number of fence posts and accessories is calculated. The installation perimeter is cleared of obstacles and leveled. On the site, markings are performed, marking the installation locations of the pillars and the entrance group.
2nd stage. Installation of pillars
The fence posts from the profile pipe are installed according to the markings made on the site in one of the following ways:
- hammering of support pillars;
- backing up posts;
- concreting of pillars;
- installation of pillars on a strip foundation.
The choice of the method for installing the pillars depends on the type of soil on the site.
On heaving soils, driving is performed: the pillars are driven into a depth of 1200 mm. Soils with seasonal heaving require the use of backing: a motor-drill is used to drill holes with a diameter of 200 mm to a depth of 1200 to 1500 mm, the pillars are installed in the holes and tamped with rubble. For concreting, holes are drilled with a diameter of 200 mm and a depth of 1500 mm, pillars are installed and poured with concrete - this installation method is used on stable soils. The strip foundation significantly increases the strength and stability of the fence. To install the fence in this way, they dig a trench with a section of 250x500 mm, holes are drilled into the trench for the posts. A reinforcing cage is built in the trench, metal posts for the fence are inserted into the holes, then the structure is filled with concrete.
Installation of a wooden picket fence
Wooden logs are attached to the installed pillars using fasteners, for which the pillars are first marked. The logs are fixed with self-tapping screws, the fence boards are mounted on the logs. Installation of the board is carried out without gaps, the joints are closed with slats 100 mm wide. Lastly, the strips are mounted on the top and bottom of the section, and then the cover strip. You can also attach ready-made fence sections to the posts.
Construction of wooden fences
The company Masterzabor assembles fences from a wooden picket fence in Moscow and the Moscow region. Competent installation of a wooden fence, professionally performed by qualified specialists, ensures high quality and long service life of the fence. A solid fence will shelter the site from prying eyes, as well as protect it from wind, dust and noise.
Benefits: Affordable, maintenance-free, durable. Disadvantage: a little aesthetic, only perforated. The frame elements are reinforced with metal. Disadvantage: high cost, only available in white. Galvanized steel or aluminum models have taken over the traditional decorative iron fence. Like them, they look great without requiring any maintenance.
Various installation scenarios
Variation: there are also steel panel fences. Benefits: Maintenance-free aesthetic sophistication, durability, choice of colors. Disadvantage: high cost, the model is often openwork. Anchoring the posts in the ground is the most important step as the stability of the fence depends on it. There are several good methods, each of which goes beyond its solution. The digging and method of fixing the pillars will depend on the type of terrain: rocky, clayey, sandy, etc.
Installation of a fence for a summer residence made of metal
1st stage. Preparing for installation
At this stage, the perimeter of the site is measured, determining the length and height of the future fence. Then the required number of fence posts and accessories is calculated. The installation perimeter is cleared of obstacles and leveled. On the site, markings are performed, marking the installation locations of the pillars and the entrance group.
2nd stage. Installation of pillars
The fence posts from the profile pipe are installed according to the markings made on the site in one of the following ways:
- hammering of support pillars;
- backing up posts;
- concreting of pillars;
- installation of pillars on a strip foundation.
The choice of the method for installing the pillars depends on the type of soil on the site.
On heaving soils, driving is performed: the pillars are driven into a depth of 1200 mm. Soils with seasonal heaving require the use of backing: a motor-drill is used to drill holes with a diameter of 200 mm to a depth of 1200 to 1500 mm, the pillars are installed in the holes and tamped with rubble. For concreting, holes are drilled with a diameter of 200 mm and a depth of 1500 mm, pillars are installed and poured with concrete - this installation method is used on stable soils. The strip foundation significantly increases the strength and stability of the fence. To install the fence in this way, they dig a trench with a section of 250x500 mm, holes are drilled into the trench for the posts. A reinforcing cage is built in the trench, metal posts for the fence are inserted into the holes, then the structure is filled with concrete.
Installation of a wooden picket fence
Wooden logs are attached to the installed pillars using fasteners, for which the pillars are first marked. The logs are fixed with self-tapping screws, the fence boards are mounted on the logs. Installation of the board is carried out without gaps, the joints are closed with slats 100 mm wide. Lastly, the strips are mounted on the top and bottom of the section, and then the cover strip. You can also attach ready-made fence sections to the posts.
Construction of wooden fences
The company Masterzabor assembles fences from a wooden picket fence in Moscow and the Moscow region. Competent installation of a wooden fence, professionally performed by qualified specialists, ensures high quality and long service life of the fence. A solid fence will shelter the site from prying eyes, as well as protect it from wind, dust and noise.
Fences that form a palisade are much more susceptible to wind forces than clay models. Organizers typically dig holes 6 to 8 inches in diameter and 3 to 4 feet deep. For more stability, several suggest digging up to 6 inches below the gel line. Are you a handyman? You could cut the holes with the installer and finish the fencing yourself. Classic: Concrete is poured into a cylindrical formwork pre-installed in the hole. On a wooden post, the external seal should be applied later if a shrinkage joint appears between the post and the concrete. Option: a metal bracket is inserted into concrete; the base of the post is then screwed onto the stirrup. Therefore, the wood does not come into contact with concrete. Practical Practice: This method is the most common. The concrete is poured directly into the hole. The base of the pole, anchored to a compacted gravel bottom, is poured into concrete. Traditional: the pole is buried directly into the ground. It is held in place by compacting stone dust around it. Delgen: The firm is entrusted with the task of screwing under the gel line, heat piles with ribs. The base of the posts is then screwed to the adjustable stirrups in the pile head. Innovator: It is also possible to hold the pole in the hole by pouring in expansive urethane foam designed for this purpose.
- Therefore, it is better to reduce the distance between the posts and fix them securely.
- If you want to do the same, plan an expansion.
- The pole, resting on the compacted gravel bottom, is poured into concrete.
- On the surface, to encourage dripping, the concrete is smoothed into a cone.
Installation of polycarbonate fences
1st stage. Preparing for installation
At this stage, the perimeter of the site is measured, determining the length and height of the future fence. Then the required number of fence posts and accessories is calculated. The installation perimeter is cleared of obstacles and leveled. On the site, markings are performed, marking the installation locations of the pillars and the entrance group.
2nd stage. Installation of pillars
The fence posts from the profile pipe are installed according to the markings made on the site in one of the following ways:
- hammering of support pillars;
- backing up posts;
- concreting of pillars;
- installation of pillars on a strip foundation.
The choice of the method for installing the pillars depends on the type of soil on the site.
On heaving soils, driving is performed: the pillars are driven into a depth of 1200 mm. Soils with seasonal heaving require the use of backing: a motor-drill is used to drill holes with a diameter of 200 mm to a depth of 1200 to 1500 mm, the pillars are installed in the holes and tamped with rubble. For concreting, holes are drilled with a diameter of 200 mm and a depth of 1500 mm, pillars are installed and poured with concrete - this installation method is used on stable soils. The strip foundation significantly increases the strength and stability of the fence. To install the fence in this way, they dig a trench with a section of 250x500 mm, holes are drilled into the trench for the posts. A reinforcing cage is built in the trench, metal posts for the fence are inserted into the holes, then the structure is filled with concrete.
Installation of a wooden picket fence
Wooden logs are attached to the installed pillars using fasteners, for which the pillars are first marked. The logs are fixed with self-tapping screws, the fence boards are mounted on the logs. Installation of the board is carried out without gaps, the joints are closed with slats 100 mm wide. Lastly, the strips are mounted on the top and bottom of the section, and then the cover strip. You can also attach ready-made fence sections to the posts.
Construction of wooden fences
The company Masterzabor assembles fences from a wooden picket fence in Moscow and the Moscow region. Competent installation of a wooden fence, professionally performed by qualified specialists, ensures high quality and long service life of the fence. A solid fence will shelter the site from prying eyes, as well as protect it from wind, dust and noise.
Installation of fences for construction sites
1st stage. Preparing for installation
At this stage, the perimeter of the site is measured, determining the length and height of the future fence. Then the required number of fence posts and accessories is calculated. The installation perimeter is cleared of obstacles and leveled. On the site, markings are performed, marking the installation locations of the pillars and the entrance group.
2nd stage. Installation of pillars
The fence posts from the profile pipe are installed according to the markings made on the site in one of the following ways:
- hammering of support pillars;
- backing up posts;
- concreting of pillars;
- installation of pillars on a strip foundation.
The choice of the method for installing the pillars depends on the type of soil on the site.
On heaving soils, driving is performed: the pillars are driven into a depth of 1200 mm. Soils with seasonal heaving require the use of backing: a motor-drill is used to drill holes with a diameter of 200 mm to a depth of 1200 to 1500 mm, the pillars are installed in the holes and tamped with rubble. For concreting, holes are drilled with a diameter of 200 mm and a depth of 1500 mm, pillars are installed and poured with concrete - this installation method is used on stable soils. The strip foundation significantly increases the strength and stability of the fence. To install the fence in this way, they dig a trench with a section of 250x500 mm, holes are drilled into the trench for the posts. A reinforcing cage is built in the trench, metal posts for the fence are inserted into the holes, then the structure is filled with concrete.
Installation of a wooden picket fence
Wooden logs are attached to the installed pillars using fasteners, for which the pillars are first marked. The logs are fixed with self-tapping screws, the fence boards are mounted on the logs. Installation of the board is carried out without gaps, the joints are closed with slats 100 mm wide. Lastly, the strips are mounted on the top and bottom of the section, and then the cover strip. You can also attach ready-made fence sections to the posts.
Construction of wooden fences
The company Masterzabor assembles fences from a wooden picket fence in Moscow and the Moscow region. Competent installation of a wooden fence, professionally performed by qualified specialists, ensures high quality and long service life of the fence. A solid fence will shelter the site from prying eyes, as well as protect it from wind, dust and noise.
Installation of fences for sports grounds
1st stage. Preparing for installation
At this stage, the perimeter of the site is measured, determining the length and height of the future fence. Then the required number of fence posts and accessories is calculated. The installation perimeter is cleared of obstacles and leveled. On the site, markings are performed, marking the installation locations of the pillars and the entrance group.
2nd stage. Installation of pillars
The fence posts from the profile pipe are installed according to the markings made on the site in one of the following ways:
- hammering of support pillars;
- backing up posts;
- concreting of pillars;
- installation of pillars on a strip foundation.
The choice of the method for installing the pillars depends on the type of soil on the site.
On heaving soils, driving is performed: the pillars are driven into a depth of 1200 mm. Soils with seasonal heaving require the use of backing: a motor-drill is used to drill holes with a diameter of 200 mm to a depth of 1200 to 1500 mm, the pillars are installed in the holes and tamped with rubble. For concreting, holes are drilled with a diameter of 200 mm and a depth of 1500 mm, pillars are installed and poured with concrete - this installation method is used on stable soils. The strip foundation significantly increases the strength and stability of the fence. To install the fence in this way, they dig a trench with a section of 250x500 mm, holes are drilled into the trench for the posts. A reinforcing cage is built in the trench, metal posts for the fence are inserted into the holes, then the structure is filled with concrete.
Installation of a wooden picket fence
Wooden logs are attached to the installed pillars using fasteners, for which the pillars are first marked. The logs are fixed with self-tapping screws, the fence boards are mounted on the logs. Installation of the board is carried out without gaps, the joints are closed with slats 100 mm wide. Lastly, the strips are mounted on the top and bottom of the section, and then the cover strip. You can also attach ready-made fence sections to the posts.
Construction of wooden fences
The company Masterzabor assembles fences from a wooden picket fence in Moscow and the Moscow region. Competent installation of a wooden fence, professionally performed by qualified specialists, ensures high quality and long service life of the fence. A solid fence will shelter the site from prying eyes, as well as protect it from wind, dust and noise.
Installing a fence for a park
1st stage. Preparing for installation
At this stage, the perimeter of the site is measured, determining the length and height of the future fence. Then the required number of fence posts and accessories is calculated. The installation perimeter is cleared of obstacles and leveled. On the site, markings are performed, marking the installation locations of the pillars and the entrance group.
2nd stage. Installation of pillars
The fence posts from the profile pipe are installed according to the markings made on the site in one of the following ways:
- hammering of support pillars;
- backing up posts;
- concreting of pillars;
- installation of pillars on a strip foundation.
The choice of the method for installing the pillars depends on the type of soil on the site.
On heaving soils, driving is performed: the pillars are driven into a depth of 1200 mm. Soils with seasonal heaving require the use of backing: a motor-drill is used to drill holes with a diameter of 200 mm to a depth of 1200 to 1500 mm, the pillars are installed in the holes and tamped with rubble. For concreting, holes are drilled with a diameter of 200 mm and a depth of 1500 mm, pillars are installed and poured with concrete - this installation method is used on stable soils. The strip foundation significantly increases the strength and stability of the fence. To install the fence in this way, they dig a trench with a section of 250x500 mm, holes are drilled into the trench for the posts. A reinforcing cage is built in the trench, metal posts for the fence are inserted into the holes, then the structure is filled with concrete.
Installation of a wooden picket fence
Wooden logs are attached to the installed pillars using fasteners, for which the pillars are first marked. The logs are fixed with self-tapping screws, the fence boards are mounted on the logs. Installation of the board is carried out without gaps, the joints are closed with slats 100 mm wide. Lastly, the strips are mounted on the top and bottom of the section, and then the cover strip. You can also attach ready-made fence sections to the posts.
Construction of wooden fences
The company Masterzabor assembles fences from a wooden picket fence in Moscow and the Moscow region. Competent installation of a wooden fence, professionally performed by qualified specialists, ensures high quality and long service life of the fence. A solid fence will shelter the site from prying eyes, as well as protect it from wind, dust and noise.
Installing parking fences
1st stage. Preparing for installation
At this stage, the perimeter of the site is measured, determining the length and height of the future fence. Then the required number of fence posts and accessories is calculated. The installation perimeter is cleared of obstacles and leveled. On the site, markings are performed, marking the installation locations of the pillars and the entrance group.
2nd stage. Installation of pillars
The fence posts from the profile pipe are installed according to the markings made on the site in one of the following ways:
- hammering of support pillars;
- backing up posts;
- concreting of pillars;
- installation of pillars on a strip foundation.
The choice of the method for installing the pillars depends on the type of soil on the site.
On heaving soils, driving is performed: the pillars are driven into a depth of 1200 mm. Soils with seasonal heaving require the use of backing: a motor-drill is used to drill holes with a diameter of 200 mm to a depth of 1200 to 1500 mm, the pillars are installed in the holes and tamped with rubble. For concreting, holes are drilled with a diameter of 200 mm and a depth of 1500 mm, pillars are installed and poured with concrete - this installation method is used on stable soils. The strip foundation significantly increases the strength and stability of the fence. To install the fence in this way, they dig a trench with a section of 250x500 mm, holes are drilled into the trench for the posts. A reinforcing cage is built in the trench, metal posts for the fence are inserted into the holes, then the structure is filled with concrete.
Installation of a wooden picket fence
Wooden logs are attached to the installed pillars using fasteners, for which the pillars are first marked. The logs are fixed with self-tapping screws, the fence boards are mounted on the logs. Installation of the board is carried out without gaps, the joints are closed with slats 100 mm wide. Lastly, the strips are mounted on the top and bottom of the section, and then the cover strip. You can also attach ready-made fence sections to the posts.
Construction of wooden fences
The company Masterzabor assembles fences from a wooden picket fence in Moscow and the Moscow region. Competent installation of a wooden fence, professionally performed by qualified specialists, ensures high quality and long service life of the fence. A solid fence will shelter the site from prying eyes, as well as protect it from wind, dust and noise.
Installation of fences for the garden
1st stage. Preparing for installation
At this stage, the perimeter of the site is measured, determining the length and height of the future fence. Then the required number of fence posts and accessories is calculated. The installation perimeter is cleared of obstacles and leveled. On the site, markings are performed, marking the installation locations of the pillars and the entrance group.
2nd stage. Installation of pillars
The fence posts from the profile pipe are installed according to the markings made on the site in one of the following ways:
- hammering of support pillars;
- backing up posts;
- concreting of pillars;
- installation of pillars on a strip foundation.
The choice of the method for installing the pillars depends on the type of soil on the site.
On heaving soils, driving is performed: the pillars are driven into a depth of 1200 mm. Soils with seasonal heaving require the use of backing: a motor-drill is used to drill holes with a diameter of 200 mm to a depth of 1200 to 1500 mm, the pillars are installed in the holes and tamped with rubble. For concreting, holes are drilled with a diameter of 200 mm and a depth of 1500 mm, pillars are installed and poured with concrete - this installation method is used on stable soils. The strip foundation significantly increases the strength and stability of the fence. To install the fence in this way, they dig a trench with a section of 250x500 mm, holes are drilled into the trench for the posts. A reinforcing cage is built in the trench, metal posts for the fence are inserted into the holes, then the structure is filled with concrete.
Installation of a wooden picket fence
Wooden logs are attached to the installed pillars using fasteners, for which the pillars are first marked. The logs are fixed with self-tapping screws, the fence boards are mounted on the logs. Installation of the board is carried out without gaps, the joints are closed with slats 100 mm wide. Lastly, the strips are mounted on the top and bottom of the section, and then the cover strip. You can also attach ready-made fence sections to the posts.
Construction of wooden fences
The company Masterzabor assembles fences from a wooden picket fence in Moscow and the Moscow region. Competent installation of a wooden fence, professionally performed by qualified specialists, ensures high quality and long service life of the fence. A continuous fence will shelter the site from prying eyes, as well as protect it from wind, dust and noise.
Installation of kindergarten fences
1st stage. Preparing for installation
At this stage, the perimeter of the site is measured, determining the length and height of the future fence. Then the required number of fence posts and accessories is calculated. The installation perimeter is cleared of obstacles and leveled. On the site, markings are performed, marking the installation locations of the pillars and the entrance group.
2nd stage. Installation of pillars
The fence posts from the profile pipe are installed according to the markings made on the site in one of the following ways:
- hammering of support pillars;
- backing up posts;
- concreting of pillars;
- installation of pillars on a strip foundation.
The choice of the method for installing the pillars depends on the type of soil on the site.
On heaving soils, driving is performed: the pillars are driven into a depth of 1200 mm. Soils with seasonal heaving require the use of backing: a motor-drill is used to drill holes with a diameter of 200 mm to a depth of 1200 to 1500 mm, the pillars are installed in the holes and tamped with rubble. For concreting, holes are drilled with a diameter of 200 mm and a depth of 1500 mm, pillars are installed and poured with concrete - this installation method is used on stable soils. The strip foundation significantly increases the strength and stability of the fence. To install the fence in this way, they dig a trench with a section of 250x500 mm, holes are drilled into the trench for the posts. A reinforcing cage is built in the trench, metal posts for the fence are inserted into the holes, then the structure is filled with concrete.
Installation of a wooden picket fence
Wooden logs are attached to the installed pillars using fasteners, for which the pillars are first marked. The logs are fixed with self-tapping screws, the fence boards are mounted on the logs. Installation of the board is carried out without gaps, the joints are closed with slats 100 mm wide. Lastly, the strips are mounted on the top and bottom of the section, and then the cover strip. You can also attach ready-made fence sections to the posts.
Construction of wooden fences
The company Masterzabor assembles fences from a wooden picket fence in Moscow and the Moscow region. Competent installation of a wooden fence, professionally performed by qualified specialists, ensures high quality and long service life of the fence. A continuous fence will shelter the site from prying eyes, as well as protect it from wind, dust and noise.
Installation of fences for schools
1st stage. Preparing for installation
At this stage, the perimeter of the site is measured, determining the length and height of the future fence. Then the required number of fence posts and accessories is calculated. The installation perimeter is cleared of obstacles and leveled. On the site, markings are performed, marking the installation locations of the pillars and the entrance group.
2nd stage. Installation of pillars
The fence posts from the profile pipe are installed according to the markings made on the site in one of the following ways:
- hammering of support pillars;
- backing up posts;
- concreting of pillars;
- installation of pillars on a strip foundation.
The choice of the method for installing the pillars depends on the type of soil on the site.
On heaving soils, driving is performed: the pillars are driven into a depth of 1200 mm. Soils with seasonal heaving require the use of backing: a motor-drill is used to drill holes with a diameter of 200 mm to a depth of 1200 to 1500 mm, the pillars are installed in the holes and tamped with rubble. For concreting, holes are drilled with a diameter of 200 mm and a depth of 1500 mm, pillars are installed and poured with concrete - this installation method is used on stable soils. The strip foundation significantly increases the strength and stability of the fence. To install the fence in this way, they dig a trench with a section of 250x500 mm, holes are drilled into the trench for the posts. A reinforcing cage is built in the trench, metal posts for the fence are inserted into the holes, then the structure is filled with concrete.
Installation of a wooden picket fence
Wooden logs are attached to the installed pillars using fasteners, for which the pillars are first marked. The logs are fixed with self-tapping screws, the fence boards are mounted on the logs. Installation of the board is carried out without gaps, the joints are closed with slats 100 mm wide. Lastly, the strips are mounted on the top and bottom of the section, and then the cover strip. You can also attach ready-made fence sections to the posts.
Construction of wooden fences
The company Masterzabor assembles fences from a wooden picket fence in Moscow and the Moscow region. Competent installation of a wooden fence, professionally performed by qualified specialists, ensures high quality and long service life of the fence. A continuous fence will shelter the site from prying eyes, as well as protect it from wind, dust and noise.
