In the process of building a garage, its owner is faced with one of the main problems - the choice of garage doors. This is really difficult given the variety of designs and the wide choice of manufacturers.
It is rather difficult to analyze in advance the pros and cons of this or that type of gate, because the main aspects are recognized only during operation. Therefore, in the event of dissatisfaction with your choice, it will be impossible to replace this product with a new one. It is to facilitate the choice that this article was created. It describes in detail the types of gates, their pros and cons.
It also consists of a single door wing, but, unlike a sliding gate, this wing is supplemented at the bottom with a so-called C profile, into which special riders are inserted, behind which the gate is then transported and does not come on its own rail, therefore it also does not require equality roadway. The drives are the same for both types of doors! A photo detector, beacon and other accessories can also be supplied to the drive, all at a reduced price.
It consists of two door wings. The fenders are mounted on articulated struts. Each wing, if equipped with an electric drive, can be delayed, that is, it closes, the other begins to close with a certain delay. The wing drive kit consists of two motors, electronics, a pair of photocells, a warning beacon and other accessories, all at an affordable price.
Designs are a frequent choice of the buyer. These gates are easy to operate and affordable. Often they are made double-leaf, but there is also an option with one leaf. Although single-leaf gates are prone to sagging. In addition to the sashes, these gates also consist of two supports and a foundation. They are hung on hinges and open outward. Often, a wicket is made in one of them for a practical entrance and exit, so that there is no need to constantly use the gate.
Sliding telescopic sliding gates on a rail consist of two sliding gates that are connected to each other by a mechanism. The inner wing moves along a rack with an automatic drive and a second auxiliary mechanism. On the lower profile, wheels are installed, which move along the rail, and in the upper part, the wings are guided by guide rollers.
Advantages and disadvantages of sliding gates along the rail. The opening space is only 50 cm more than half the width. Shorter gate opening time. The necessary intervention in the existing passage is the necessary concrete foundation along the entire length of the gate.
Sashes can be made from wood, from simple metal sheets, sandwich panels, profiled sheets, etc., it all depends on the capabilities of the owner. For easier and more convenient control of such garage doors, drives with remote and automatic control are used. The main disadvantage of these gates is the need for free space in front of them to function. In winter, it is often necessary to clear snow blockages to fully open the flaps. There will also be problems if the garage is on the ground. Sometimes swing gates should be installed 100 mm higher from the ground.
Two rails are tightly fastened parallel to each other - requires a total rail length of approximately 3.5 × gap width. The elegant automatic sectional doors offer the most convenient and most common door closing system - the door opens vertically upwards - moves under the ceiling. This gives you more space in the garage, in front of the garage, and you have easy access.
Sectional door program with unique widths
With the door and door configurator, you can choose the door of your choice, you have all the options. The catalog which you can find here will fully inform you about the details and types of sectional doors. Sectional doors open vertically upward to provide space for doors and doors. For compact sectional doors, the individual lamellas are folded vertically to the right after translation. The very low insertion depth is especially advantageous for halls with domes, glass roofs and glass facades.
Pros:
- affordable price;
- ease of use and reliability;
- a variety of materials for the manufacture of sashes.
Disadvantages:
- the need for a free zone in front of the gate;
- the need for a perfectly correct fit to provide good thermal insulation;
- the ground surface in front of the gate must be level for the gate to function.
In this case, there is only one flap and it moves sideways when opened. Installation of such gates is possible both inside and outside. In order to provide 
there is a built-in roller mechanism, often at the top. The guides and sash frame are made of steel, zinc-coated against corrosion. You can use as a placeholder different materials... For better thermal insulation, it is advised to take a polyurethane filler and install sealing materials in the opening that will protect against cold and moisture.
We supply and install a garage door that meets high quality and safety standards and enhance the appearance. From a wide range of typists and designers, you can easily choose the one that works best for your home or other building.
Disadvantages of sliding gates
Industrial doors are an integral part of modern industrial facilities. We supply and install all types of industrial doors from certified manufacturers. Here you will find sectional industrial doors, garage door, industrial driveway door, high-speed industrial door, gate and door leaf, side sliding door, shallow overhead or behind each other, Network roller shutter. Their quality and competitive price make them the ideal solution for any project.
However, this type is not suitable for all rooms, there are restrictions on the width. After all, the sash must be placed inside the building in a fully open position. But this device can be of any height. Also, you do not need to have free space in front of the opening, since the sliding gates are not blocked in case of heavy rainfall.
Regulation of this type of gate is possible manually, for this you need a drive. This device is used for opening and closing. Manufacturers Nice, Hormann, Came, Doorhan specialize in the manufacture of such mechanisms.
Automatic doors provide convenient and barrier-free entry for large numbers of people and provide increased energy savings and increased safety. We supply manual and automatic single and double leaf doors in a variety of designs such as straight, worn, worn, arched, round, telescopic and abrasive. Applications reside in the most sophisticated objects, which should provide a modern, simple yet secure and simple login.
Control technology is used to facilitate teams and teams. It is a complete retrofit system for the logistics field, with stubborn products consisting of bridges, mud flaps, shifting cameras and more. special equipment... All sorting methods are designed for different specific procurement and diversion conditions of modern modern logistics. The gateway serves to close the entrances to the ground and adds to its overall appearance. We offer a complete entrance gate solution for your home and business.
Any finish is possible, even wooden. You just need to remember that the tree will not serve for a long time in our climate.
Pros:
- any height is possible;
- such gates do not need a free zone in front of the garage, their functioning does not depend on snow blockages;
- attractive appearance;
- are distinguished by their reliability and resistance to mechanical stress.
Minuses:
We manufacture and install entrance gates in a variety of designs, so we can easily find a practical solution that suits your requirements and needs. We will supply and mount you on a variety of sliding, sliding, self-supporting, single row, double row and other special types.
Requires additional space under the ceiling and interferes with engineering systems
We offer and assemble automatic harrows and parking systems as perfect solution to provide access to land and facilities. They are designed for places where the emphasis is on high reliability, even with intensive work. They surpass their high quality design, modern design, reliability, durability and possible addition to the most versatile functions and accessories.
- the width of the garage should correspond to the width of the sash, or more precisely, it should be even more than one and a half times;
- built-in rollers wear out quickly.
These doors have a monolithic leaf in the size of the opening. The linkage system is responsible for movement. In the process of opening, the sash rises and remains lying under the ceiling. This is possible thanks to the integrated guides and roller system. The overhead gates are operated manually or electrically. The key to this success is the torsion springs, which compensate for the considerable weight and allow normal operation. The details of the mechanism are made of galvanized steel and are responsible for the adherence of the canvas to the opening closely. Sandwich panels are most suitable for the manufacture of such gates.
We offer high quality outdoor awnings that provide you with comfortable sun protection. Reliably not only protect you from sunlight, but also provide the perfect look for your shop, home, balcony, terrace, shop, restaurant or any other object. Our awnings are a reliable and proven solution.
We manufacture and completely supply plastic slatted blinds to industrial and manufacturing areas. The plastic curtain serves as effective thermoregulation and seating, which has a positive effect on warmth, light and well-being. They prevent dust from dust, eliminate, help reduce dust levels. They are suitable for most modern operations, allowing people to quickly pass or technology to pass. The curtains are supplied in different designs, depending on the specific situation.
Thanks to the creative vision of the designers lifting gates made with steel, bronze or aluminum cladding.
Due to the lift-link mechanism and the continuous leaf, such gates are difficult to break. If you install modern devices with various automation elements, you can say with precision that such a design is really easy to use. For safety reasons, it is necessary to choose a drive with a reverse motion, that is, if the gate stumbles upon something during the lowering process, it will automatically return to its original position. This is very convenient and reduces the likelihood of injury during use.
Our offer includes delivery and installation of fire doors and complete fire seal assemblies. Searchlights protect the fire from burning out fireplaces and can withstand the effects of fire for a certain period of time. We install the widest range of fireplaces in industrial facilities in a very wide range, in accordance with the specification and specific requirements for fire resistance and technical equipment.
If you want to order plastic windows immediately, fill out the order form for plastic windows... The roller garage door is assembled outside the garage behind the opening. Aluminum lamellas with polyurethane filling are placed in an aluminum cabinet located in a garage strip, the size of which depends on the height of the door. Roller doors are a compact product suitable for preheated garages.
Pros:
- compactness;
- ideal for small spaces;
- difficult to hack.
Minuses:
- low thermal insulation;
- the mechanism is affected by weather conditions;
- the need to avoid intensive use (it is advisable not to exceed ten openings per day).
Sectional doors
This design is based on interconnected sections that form a single sash. These sections are connected by movable hinges. The peculiarity of the functioning of such gates is flexibility, because in the process of opening the sections gradually rise, due to which the passage is freed. The parts assembled at the top are folded into a specially designed place above the opening and do not take up much space. The strong point of sectional doors is the minimum requirement for the width of the garage, the space in front of it or inside it.
Minimal allowances for space inside and outside the garage good thermal insulation properties and durability of polyurethane skirting boards selection of different possibilities for controlling the ventilation and lighting ability through special lamellas minimal maintenance and trouble-free operation. The main design is done in white or brown... Whether you would like to customize the color of a door with windows, a house or a wall, we have a wide selection of other plank color schemes for you, including imitation wood.
The doors of the rental garage are equipped with an electric drive with the ability to connect an emergency control in the event of a power failure. current. Control is different types sleepers, long distance transmitter, or a combination of both. One control element can be used to control both the gate and the entrance gate.
The soft roller mechanism is responsible for the silent operation of the gate. Also, the opening of such gates will not interfere with excessive precipitation or earth. Basically, the sections are made of aluminum or steel sandwich panels filled with special polyurethane. This gives good strength, high thermal insulation and sound insulation.
For selected types, the debris can be illuminated by installing glazed strips or by adding winding lamellas.
The garage door is made of two-core steel profiles 500 or 610 mm high with 40 mm or 20 mm polyurethane filling. Cassette or lamellar doors in different colors are weather-resistant. Using a torsion spring system, they are interested in guide rails under the garage roof. Sliding doors are a type of new insulated garage.
Sectional door manufacturers offer a wide range of materials and trims to satisfy the most sophisticated customer. In addition to their appearance, it is possible to equip them with various devices for remote control and increased automation. You can also install various anti-tampering tools.
Perfect sealing of the hole and excellent thermal insulation properties of the door contact of individual sections without the risk of safe operation of finger contact with manual control or with electric drive and logic control electronics. The main design is white.
Quiet and worry-free operation is ensured by an electric overhead tensioning drive with logic control electronics and anti-grip protection. The controls are different types of sleepers, remote controllers, central control or a combination of these. One control is the joint control of the gate and the entrance gate. If the specification of the door allows, you can replace the electric drive with manual control.
In this version of the gate, a built-in wicket with a window is possible, the only thing is that it must open outward.
Pros:
- undemanding to the characteristics of the room;
- high thermal insulation and sound insulation;
- wide range of finishes.
Minuses:
- high cost of the product;
- the complexity of the design;
- accessibility to hacking.
The interior of the garment can be illuminated by glazing plate sections or cassettes. We also offer such castings for both types of sections. Flooring or plastering of pallets, as well as the interior of the garage with a free ceiling and cover plate, depending on the type of coating used, min. 180 mm for connecting an electric drive el. The extruded garage door consists of a door leaf made of galvanized steel sheets of various designs and paint, which assists in flushing the built-in ballast spring system in the guide rails under the garage roof.
Rolling gates
The systems are somewhat similar to sectional structures, only the width of the connected lines does not exceed 25 millimeters. These strips are profiled and made of aluminum or steel. They are connected by a movable mount. In the process of opening, the sash is directed upwards and screwed onto the shaft, which is located inside the box. Thus, in the open position, these gates are not massive.
What is better to install at home
The expansion gates are suitable for home houses as well as for sewing clothes. Due to their low purchase cost, they are often used to renovate and replace old garage doors. We offer 28 standard sizes for embedding in a hole or hole.
Cons of sectional doors
The main motif of the door leaf is a vertical bracelet in white or brown. Exhaust doors are fitted as standard with a 3-point lock at the base price. Quiet and worry-free operation can be ensured by a remote controlled electric drive.
They are less often chosen for garages, because they are mainly suitable for low structures (2 or 2.5 m) with a width of no more than 3 meters. If it is necessary to block passages with a width of 3 meters or more, then you need to understand that there will be many holes and slots in the canvas due to the large number of moving parts. Although, if you do not stop at this moment, then you can block large aisles with rolling gates.
Pros:
- compact storage;
- no need for a free zone in front of the garage;
- if you do not focus on the gaps, then this type of gate will easily block a wide passage;
- low cost.
Folded gate
The leaf in such gates consists of volumetric sections that can be collected both at the top and on the sides. This type of gate is somewhat reminiscent of a screen. Folded gates are made from metal sheets. Where they are connected to each other, sealing parts are installed. Those gates that open upward make the opening completely free, but those that open to the sides narrow it. There can be 2, 4 or more leaves. They move either inward or outward.
It is required to remember that for this type of gate you need additional space in front of the room or inside, it all depends on the way of opening. Also, translucent elements can be built into this system.
Much more often, buyers choose folding gates, in which sections are assembled at the top and mounted above the entrance. Because if the doors open to the sides, then they take the width of the passage.
Pros:
- it is possible to block large aisles with such gates;
- when compared with swing gates, then in the case of folding gates, less space is needed to open;
- high endurance during operation due to the minimum number of moving elements;
- if these gates are supplemented with a seal, then they are distinguished by increased thermal insulation;
- the possibility of installing windows on the sash.
Minuses:
- you need a place in front of the garage or inside it;
- they are characterized by a soft construction, so the surfaces are susceptible to mechanical damage.
There are folding gates for rooms and for openings in the perimeter of the fence
Folding doors for premises
This is an improved swing gate, in the design of which some changes have been made. The sashes are divided into hinged segments, and an unloading bearing profile is added from above, as on suspended sliding gatesoh. The system of canvases is suspended on it by means of special roller supports.The new product retains its simplicity of design and gains a number of advantages:
The service life is increased, since the hinges are unloaded, because the main load from the weight of the sashes is taken by the bearing profile installed on top of the structure.
The restrictions on the width of the overlapping opening are removed. Since the weight of the sash is distributed over the lintel, and does not break the hinges.
Unlike sliding gates, the rollback side does not require much space and can be opened too. After all, the canvases are collected in an accordion behind the opening.
The issue of sealing has been competently resolved, that is, these gates can be warm. And since we are practically unlimited in the weight of the canvas (within reasonable limits), then these gates can be not just warm, but very warm.
And what is not unimportant, such important qualities as the rigidity of the construction of the canvases are preserved, due to which the gates are as strong as possible.
Folding gates for the organization of entry - exit
Hinged folding gates - this is one of the options to close the opening in the fence, allowing you to take care of the adjacent space and not loading the carriageway. Since it does not require supporting elements in the opening and does not take up much space in the open position. Another advantage of this design is the speed with which it can close the opening, in an automated version. As with telescopic doors, the mechanical dependence between the structural elements doubles the opening and closing speed. When installing fast automation, these gates can solve two problems: protective, like a gate, and control of the flow of machines, like a barrier. Cons: complex design with rods and levers, and loaded hinges. These moments do not make the gate more reliable. And when automating such gates to ensure their safe operation, the safety elements increase the cost of the set by a significant amount of money.
Four-leaf automated
