A clogged sewer pipe is a common problem, but very unpleasant.
That is why it is not surprising that when such a problem appears, a person immediately begins to look for a remedy for blockages in pipes.
Pipes can get clogged for various reasons, of course, you can always use the good old plunger, but today there is a more convenient and simple way to remove blockages in pipes - this is a special chemical remedy for blockages.
It looks like a blockage in a sewer pipe
The range of chemicals for this purpose is now quite large, so it is not surprising that choosing the best remedy for blockage in pipes, a person may face difficulties.
To begin with, it is worthwhile to figure out that such drugs may differ in the form of release, namely, there are loose, liquid and gel means for cleaning sewer pipes.
Therefore, first, you need to decide what kind of means for eliminating blockages in pipes will be convenient and suitable for a specific purpose.
Remedies for pipe blockages
In addition, it is important to consider that pipe blockage remedies are acidic and alkaline.
Alkaline products are best used for removing blockages in the kitchen as they help dissolve fat.
As for acidic products, they can be used to remove soapy deposits, it dissolves quickly.
Accordingly, such products are best used in bathrooms.
That is, it is possible to decide which remedy is better for blocking pipes, only relying on the purpose of its use.
In addition to all of the above, it should be borne in mind that all chemicals for this purpose differ in the way they are used.
Alkaline pipe blockage agent
The most popular tools and methods of using them
Determining the most effective remedy for pipe clogging is a rather difficult task, since the assortment of this item of goods is quite extensive and diverse.
But there are several of the most popular tools that are very actively used by people for different purposes.
"Minute Gel" is a fairly effective remedy for blockages in pipes, which allows you to quickly and conveniently clear blockages of any nature.
It is very simple to use such a product, just pour the product into the drain, wait a few minutes for it to work, and rinse the drain with water.
The average cost of 500 ml of "Minute Gel" is 29 rubles.
Means for blockages "Minute" gel
Another remedy for blockages for plastic pipes is Tiret. The average cost of this tool is 250 rubles.
The tool has many advantages and is very easy to use:
Tiret pipe blockage remedy
"Flup" is another extremely effective tool for removing blockages in pipes, which is very actively used to remove various blockages.
The advantage of this tool is its affordable price (about 50 rubles) and a convenient method of application:
Blockage remedy "Flup"
- pour the product into the drain hole;
- pour some hot or cold water into the drain, depending on the type of product;
- wait 5-15 minutes;
- drain a large amount of water into the drain.
"Mole" is probably the most popular remedy for pipe blockages, which has been actively used by people for quite a long time to eliminate problems with sewage.
Especially popular and effective liquid remedy "Mole", which costs an average of 69 rubles per liter.
As for the features of the application, everything is very simple here:
Means for blockages "Mole"
- pour 50-150 ml of the product into the drain hole;
- leave for 2-3 hours;
- flush pipes big amount water.
The Chistin blockage remover is easy to use and multifunctional, as it can be used to remove blockages different types.
The cost of 1 liter of such a drug is approximately 47 rubles.
It is also quite simple to use it, you need to pour 250 ml of the product into the clogged pipe, wait 15 minutes and rinse with plenty of water.
Remedy for blockages of pipes "Chistin"
Well, and, of course, one cannot ignore such a means for removing blockages as Mr. Muscle.
It is necessary to apply this tool as follows:
"Mister Muscle" pipe blockage cleaner
- wipe the sink and drain hole dry;
- pour powder into the drain;
- little by little add a glass of hot water to the drain;
- wait 30 minutes, then flush the drain with plenty of water.
This is an extremely effective and fast-acting drug, which costs an average of only 87 rubles.
Considering all of the above, we can conclude that now there are quite a few means for cleaning blockages and most of them are highly effective.
So how do you make the right choice and choose really optimal remedy at a bargain price?
Advantages and disadvantages of blockage removers
If we talk about such a popular sewer cleaner as "Mister Muscle", then naturally, it has a lot of advantages.
To begin with, it is worth noting that under this brand products of various types are produced, namely gels, powders and liquids, respectively, choosing the best option will not be difficult.
Means for cleaning pipes "Mister Muscle" are highly effective, but at the same time their cost is slightly higher than that of other similar products.
Highly effective means "Mister Muscle"
If we talk about the means of the company "Flup", then they are very affordable in terms of price, but if we talk about their effectiveness, then sometimes they cannot cope with strong pollution.
Accordingly, they can be used to clean kitchen pipes that are clogged with fat and food debris, but such products are unlikely to cope with hair.
Means for removing blockages "Flup"
Regarding "Tiret", we can say that this remedy for blockages in pipes with your own hands will help to cope with even the most critical situations, when due to blockage the water does not drain at all.
In addition, the funds of this brand can be used to prevent blockages, but, despite the numerous advantages and high efficiency, their high cost can be considered a disadvantage of such funds.
Tiret pipe blockage remedy
"Chistin" is another tool that, at a low cost, is able to remove blockages of medium complexity.
It is ideal for preventing future contamination and for removing minor blockages.
Means for cleaning sewers and blockages "Chistin"
Considering all of the above, we can conclude that the best remedy for blockages in pipes, which is ideal in terms of price-quality ratio, is the Mole remedy.
The main advantage of this brand of funds is its effectiveness, and all thanks to the fact that it has been produced for more than 50 years, and has become an excellent substitute for a plunger.
But, despite the high efficiency and incredible popularity of the "Krot" sewer cleaning agent, it has a fairly affordable cost and with its help you can eliminate pollution of any type of complexity with a minimum investment of time.
The best blockage cleaner!
Summing up, it is worth noting that the means for removing blockages in pipes are very diverse, but each of them has its positive and negative sides.
That is why each person can, based on their goals and preferences, choose the best option for a product that suits him both in terms of functional properties and in terms of price.
Video
Each of us at least once in our life, but faced such a problem as a blockage in the pipe. This is a rather unpleasant and urgent matter, unless, of course, you are a fan of dirty dishes or lack of opportunity to take a shower. A huge number of TV advertisements broadcast about the effectiveness of many tools for almost instant blockage removal. Let's see if they are really good and how else you can remove the blockage.
How can you tell if there is a blockage?
The first and most important sign of blockage is a decrease in the rate of outflow of water from the bathroom / sink / toilet bowl, etc. If the plunger does not help, then it is not an air bubble that is stuck in the pipe, but fat, food debris, hair, etc. This requires urgent intervention , since when you turn on the water, you can arrange a real flood.
If, as such, there is no reduction in the rate of water drainage, but there is an unpleasant smell from the drain, then this is also a sign of a blockage, but not yet strong. It is worth taking measures right away so as not to aggravate the situation by using folk remedies or chemical gels designed to prevent blockages.
A sign of blockage is the appearance of water in the underlying drains, such as a bathtub, when water is turned on in the sink. The same effect can occur when the washing machine drains the water. In this situation, a remedy for blockages in pipes can also help. But which one should you choose? Let's figure it out.
What is any remedy for blockages in pipes based on?
What substances help The main component that is included in any means for sewer pipes, as well as in folk recipes, - acid or alkali. Alkali dissolves fatty dirt well, and acid dissolves soap, hair, threads, etc. Based on the properties, it becomes clear that alkaline ones are usually used for the kitchen, and acidic ones for the bathroom.
The pipe blockage remedy is sold in different forms:
- gel (it is more economical, since a small amount is evenly distributed over the surface of the pipe and eliminates contamination, without requiring the use of even half of the gel capacity);
- powder (it must be poured into the drain hole and poured the required amount water; it is important not to overexpose, and also thoroughly rinse off the powder with water, otherwise it may begin to corrode the surface of the bath / sink and pipe, as it is more concentrated than the other 2 types);
- liquid (it is poured into the pipe in large quantities, diluting or not diluting with water, it is also important to rinse thoroughly so that there are no problems).
Thanks to advertising and the experience of generations, we can easily name the most famous names: "Tiret Turbo", "Mole" and "Pothan".
"Mole"
Liquid "Mole" is one of the oldest products in existence. It removes blockages well, but few know that it is only suitable for metal pipes, and plastic can ruin due to an alkaline environment. Another disadvantage of "Mole" is that it has a chemical unpleasant odor, therefore, after pouring the agent into the pipe, it is better to leave the room, and after removing the blockage, ventilate it.
"Tiret Turbo"
This is a tool that can be found in any store. It's highly publicized, and for good reason. In terms of efficiency, "Tiret" is not inferior to any remedy for blockages, and even surpasses them, as it is suitable for all types of pipes and does not have a pronounced odor. "Tiret" is a gel in consistency and is divided into several categories: to prevent blockages, to eliminate blockages, to eliminate complex blockages. On the packaging it is noted that it lasts for 5 minutes. In fact, the action time may differ depending on the complexity of the blockage in the pipe, because the larger the layer of accumulated debris, the longer the gel will have to dissolve.
When polling consumers on the question of which tool they often use for cleaning water pipes, the majority answers: "Tiret". Reviews about him on the Internet and other sources are mostly positive. It removes blockages efficiently and quickly, disinfects, eliminates unpleasant odors, and prevents mold.
"Potkhan"
"Potkhan" is a pipe cleaner, the price of which exceeds the price of all other products (we will discuss this below). It is produced in the form of a powder, has an antibacterial effect and quickly dissolves fatty and other types of blockages, therefore it is recognized as the best remedy against them. Potkhan can be used both for metal pipes and for plastic ones. Its biggest drawback is its strong pungent odor. Therefore, you can use it only in accordance with the instructions, as well as use protective equipment (mask and gloves).
There are others
If you walk into a store, you will be surprised by the variety of pipe cleaners. In addition to the above, Domestos, Mister Muscle, Sanfor and others are popular. They are often similar in composition or form of release to those considered, and someone prefers them. But everyone chooses the best remedy for blockage in pipes for himself.
Prices
The prices of the blockage remedy vary greatly. So, "Tiret Turbo", depending on the type of gel and the store margin, can cost from 200 to 400 rubles. "Mole" is cheaper - about 100 rubles. for 1 liter of funds. "Potkhan", a pipe cleaner, the price of which is quite high, will cost about 500 rubles. for 600 g of powder, but it is found on the shelves less often than the same "Tiret". The rest of the funds have approximately the same prices, but their cost rarely exceeds 500 rubles.
Security measures
The remedy for blockages in pipes is very toxic, whatever it may be, so you need to take precautions so as not to harm your health and First, you need to use gloves and a mask. Gloves can be the most common, rubber, sold in any store. And the mask can be made from fabric yourself, the main thing is that it protects from harmful vapors and odors. In case of contact with the skin, be sure to wash the area with soap and water, if irritation occurs, you can drink antihistamines, but it is worth visiting a dermatologist to avoid a possible chemical burn. In case of contact with eyes, do the same - rinse with water and consult a doctor.
It is equally important to follow the rules for using a particular product. So, it is better not to pour the agent for metal pipes into plastic ones, as it can damage them and the pipes will have to be changed, and not cleaned from blockages.
How else can you clear the blockage
If you do not have the opportunity to quickly run to the store or you are not a supporter of chemicals, or perhaps for other reasons you do not want to resort to the help of "Mole", "Tiret" or another means, try mechanically unclogging pipes or using folk recipes.
The seemingly simplest way is to use a plunger. It is a bowl-shaped rubber nozzle on a wooden or plastic handle and serves to release air from the pipeline, which pushes contamination through the pipe and eliminates it. But the plunger is not always able to get rid of pollution, since the air cannot push through strong blockages.
If you call a plumber, he will not pour special agents into the pipes, but will either blow through the pipe, or disassemble it and clean it with a hose or hook, pulling out the dirt. Purging is carried out special equipmentthat looks like a vacuum cleaner. If you can disassemble the pipe and clean it yourself (if you, of course, are sure that you will then assemble it correctly), then you cannot blow it yourself by any means, since you can damage the pipes not only in the apartment, but also in the common house. It is better to pay for plumbing services than pay for repairs.
Folk recipes
There are several folk remedies that are not as strong as Pothan or Tiret, for example, but can also help if your pipes are clogged:
- If frozen fat is the cause of the blockage, then melt it with hot water. To do this, you just need to open hot water and let it flow for 5-10 minutes, the main thing is to make sure that it flows, and does not make a flood. You should not pour boiling water over the pipes, as it can damage them.
- For metal pipes, you can try to apply a solution (1 tablespoon per 1 liter of hot water). The mixture is poured for several hours, and then washed off with hot water. Important: when working with soda, wear gloves and make sure that it does not get on the enameled surfaces, as it can corrode them.
- To combat blockages, you can use regular baking soda and vinegar. Everyone knows that when soda interacts with vinegar, a large amount of foam is released, which means that a chemical reaction occurs. Pour a glass of soda into the drain, pour a glass of vinegar on top and let it stand for 30-60 minutes. After that, rinse with hot water. It is important to make sure that the foam does not come out of the drain, otherwise it can damage the surface of the enamel bath or sink.
It is worth resorting to folk methods only in case of a weak blockage or for prevention. It is very difficult to remove heavy contamination with ordinary soda, and in some cases it can only be made worse.
So, it is difficult to say unequivocally which of all the means is better. It all depends on the type of pipes, the type of blockage, and how much you are willing to pay for it.
Blockages are a problem that often manifests itself with heavy loads on the sewage system, the presence of various kinds of deformations in the system. However, even if the structure is in good condition, this nuisance may occur. Modern man can choose from a huge range of chemicals for pipe blockages.
Varieties
Sewer cleaning products are divided into three types:
- Gelatinous. Their main advantage is efficiency. They are evenly distributed over the surface of the pipes and eliminate the formed plaque. Their advantages are due to the relative density of the composition;
- Liquid. They are used to eliminate blockages that are difficult to remove. For example, the sewage system is completely blocked by the resulting layer.
It is important to know that chemicals are quite aggressive, they are merciless to organics. For this reason, it is imperative to wear special gloves when cleaning the sewer. Chemicals give off harmful vapors. For this reason, after you have poured the compound into the pipes, it is recommended to leave the room.
The higher the concentration of active substances in chemical composition, the less time it takes to clear the blockage. Do not be too zealous and leave the product in the pipes for more than the prescribed time. Ignoring this advice can lead to deformation of the sewer surface. After the allotted time has passed, the system is rinsed with running water.
When buying a product, you should also look at what exactly it is intended for. If the composition has a preventive effect, it will help eliminate a small blockage. It is recommended to use it regularly. In this way, you minimize the risk of a problem. If the pipeline is frequently clogged, purchase a solution designed to remove the blockage from standing water.
The most effective remedies
In stores, you can find substances for cleaning pipes, both from imported and from Russian manufacturers. Imported funds tend to be less aggressive. Consider the most popular blockage chemicals:
Tiret
There are two varieties of this composition: for prophylaxis, to eliminate serious layers (Turbo), professional. It can be used for both metal and plastic structures. Odorless ammonia. Allows you to eliminate layers quickly;
Mister Muscle
Available in three varieties: gel, foam or granules. Allows you to eliminate layers in half an hour. Eliminates unpleasant odors. The foamy chemical is recommended for preventive purposes. "Mister Muscle" quickly eats away organic layers (fat, food residues). The composition includes elements that contribute to the destruction of bacteria.
Mole
An active and caustic alkali-based substance. For this reason, it is better not to use it for plastic structures. Is different increased efficiency... Suitable for metal and metal-plastic structures.
Pothan
Allows you to eliminate serious layers. Differs in antibacterial effect. Quickly eats away organic deposits (fat, food). Shown for designs from the most different materials... At the same time, it has an unpleasant odor. The substance is quite caustic, so you need to work with it in full accordance with the attached instructions.
The above are the most popular remedies for blockages in pipes. However, this is far from full list... If your pipes are clogged, you can always find a suitable remedy, since they are presented in a huge assortment in stores. The main thing to remember is that the more active the substance, the faster it will save you from the problem, however, in this case, the risk of deformation of the pipeline surface is higher, especially if it is made of plastic.
The blockage in the pipes and its elimination at home is an everyday matter, but in the process of cleaning the system, certain difficulties may arise. In this article, we will analyze many ways to solve this problem and how to avoid such a situation in the future.
In a modern private house, it is impossible to imagine life without high-quality sewage. It is best, of course, to install a sewage system during the construction phase.
It is not difficult to install it, even on your own, without calling specialists. But there are points that are worth paying attention to first. For example, not making the correct slope of the sewer will lead to the fact that your pipeline will often be clogged.
One of the big troubles that you can often meet is when the sewer system gets clogged. Of course, this problem is not critical and there is no need to call a specialist - a plumber to solve it. Everyone can clean pipes at home without any special knowledge and tools.
You can understand that your system has fallen into disrepair due to the fact that it is clogged by the following factors.
- There is a bad smell coming from the bathtub, sink or toilet.
- The water began to drain much more slowly.
- Liquid level under drain grate is too high.
To prevent the formation of sewer blockages, special grates and filters are widely used. But, they cannot guarantee the occurrence of blockages.
Often fats and oils, which end up in the drain with water and other waste, contribute to this problem. They accumulate on the walls, which leads to a decrease in the throughput of the system.
As a result of the formation of such a deposit, the runoff becomes difficult, and in the future it can completely stop. Also, blockages in a private house can occur as a result of foreign objects entering the pipeline.
But, nevertheless, organic waste is a common cause. Cleaning in a private house can be done in the following ways:
- dry cleaning - carried out using products that have a caustic base;
- mechanical - with the use of special. tools;
- high pressure hydrodynamic cleaning.
Regardless of the design and materials used, cleaning at home begins with disassembling the siphon. The house has several siphons.
Each sink and bathtub has this device. With its help, you can prevent the entry of unpleasant odors from the sewer.
It is better to clean the siphon at home using various means. If the siphon is clogged, then you can use boiling water and soda. This mixture allows you to eliminate the fat layer.
For manufacturing, you need to add four tablespoons of baking soda to three liters of boiling water. You can increase the effectiveness of the solution by adding vinegar.
If you understand what causes this, then you can eliminate it quickly and without unnecessary difficulties. Knowing all the causes of blockages, you can prevent troubles. To do this, it is necessary to identify weak points in the sewer structure and carry out prevention of these sections of the drain system. It is best not to overtighten and clean everything on time.
If, nevertheless, this happened, then the methods of elimination differ, depending on the sewage system. Also, in order to understand how best to clean pipes, you need to know what material they are made of.
Blockage differences
In the buildings of the Soviet and post-Soviet periods, mainly cast iron pipes were used. They have both pros and cons. The main disadvantage is that they corrode during operation. Often inside cast iron pipelines, the walls become uneven due to build-ups that form from rust and plaque.
Because cast iron pipe can become too narrow in any part of the structure due to corrosion, it is very difficult to determine the location of the problem. In this regard, cleaning will be difficult.
More often cast iron products clogged in the area coming out of the sink inside the kitchen, or the area coming out of the toilet. In a cottage, the sewage system can get clogged in almost any area, but cleaning it in a hard-to-reach place is not so easy.
In plastic sewer systems this may be due to incorrect installation... For example, the desired tilt angle was not taken into account. In this case, a plaque forms inside, which must be cleaned to avoid further clogging.
Fat plaque - elimination at home
The biggest reason for clogging sewerage system, became a fatty plaque. It appears inside while washing dishes. Due to its high viscosity, the fat retains small particles of debris, such as hairs, food pieces, grains of sand and the like.
Subsequently, the sediment forms a thick layer that reduces throughput... In a private home, fatty deposits are the worst enemy.
In order to prevent frequent blockages due to fatty deposits, it is necessary to install grease traps... These devices will prevent clogging, and you will significantly save on the purchase of household chemicals.
These devices are made up of special sections that keep grease and debris inside. If a grease trap is installed, then you will not have a question how to clean the drain system in a private house.
But if the fatty deposit still overtook your sewer system, then with a quick response, you can urgently eliminate everything. To do this, dry the sink completely with a dry cloth.
Then immediately pour boiling water into the drain hole of your kitchen sink. If she starts to leave, then you need to continue the process. After the blockage is removed, pour hot water over the drain line.
So you can clean the sewer pipe at home using ordinary soda and vinegar. In order to carry out this procedure, you need to follow in stages.
- The kitchen sink is wiped dry.
- Pour one spoonful of baking soda inside the drain.
- Prepare a sink drain plug or an old rag.
- Pour half a mug of vinegar inside the drain.
- Close the sink hole immediately.
Video - remove clogging at home with soda
This way, you can unclog your sink or bathtub at home.
Clearing blockages with home remedies is carried out first after identifying the problem. It is not difficult to make them yourself.
And the constituent ingredients for this are at hand in every home.
Cleaning by home methods is absolutely harmless to the human body, and does not bear the negative consequences that occur as a result of the use of chemical reagents.
Here are some of the home remedies.
"Wine vinegar and clean sewage"
- 0.5 liters of boiling water;
- 1/3 cup wine vinegar
- 200 g of salt;
- 200 g of soda.
Elimination process.
- Soda and wine vinegar are mixed in a plastic container.
- The mixture is poured into a clogged drain, poured with boiling water and left for half an hour.
- After this time, the water turns on and the drain hole is flushed for ten minutes.
"Vinegar and Cleaning"
To eliminate you need:
- 200 g of soda;
- 0.5 liters of boiling water;
- 200 g vinegar.
Work process.
- The sink is cleared of water.
- Soda is poured into the drain and poured with vinegar.
- To improve the results, it is recommended to close the drain with a tight plug.
- After 30 minutes, boiling water is poured into the drain outlet.
This is the most simple recipes home mixes. Do not wait until the pipes become clogged, they should be cleaned regularly.
For preventive cleansing, it is advised to stir 4 tablespoons of baking soda with hot water. This mixture is poured into the drain and left to stand for 15 minutes. Then the drainage network is flushed with hot water. Such measures will help to avoid blockages.
Chemical reagents for elimination
If the above methods did not bring desired result, then "heavy artillery" - chemical means is used.
Video: using a plumbing cable to fix the problem
Special hydrodynamic machines and high-pressure pumps are often used when removing serious household blockages inside the domestic sewage system. These devices are used by ordinary motorists to wash their cars.
Such a device is suitable for cleaning the sewer system with a diameter of at least 50 mm. This device is able to clear any blockage, regardless of whether it is a private house or a high-rise building. Specialists in sewer cleaning have different types of nozzles for the hydrodynamic apparatus in use, which can be useful in eliminating even the most difficult problem.
For example, a spiral nozzle that can remove a very serious plug inside a pipe.
If this is not the first time you are faced with such a situation, you most likely have a special plumbing cable in your household (a long rod of twisted wire, several millimeters thick). It should be used with caution if your drain consists of plastic pipe rolls.
- Remove the siphon first.
- Grasp the cable handle. If not, it can be made in the form of a bent ring.
- Its end is inserted into the pipe. Then you need to start rotating the cable, pushing it deeper. Thus, you will thoroughly clean the entire system.
- Take it out at regular intervals and clean it from dirt, sediment and dirt elements.
- Now you can put the siphon back on.
- Flush the drain with boiling water.
Video about the principle of operation of the plumbing cable, an example of use
Hydrodynamic cleaning
If all the means and devices did not bring the desired result, then the only way out of this situation is to use a special device. With this device, water pressure is generated.
First you need to insert the end of the hose into the drain hole. Connect the other end to the compressor. Water is supplied at the same time the compressor is running.
Under pressure, the blockage is broken and removed from the pipe. This method of solving the issue is effective and is used in difficult situations.
The pressure washer is quite expensive. Therefore, not everyone can clean at home using this method.
But, even this problem can be solved. Each owner in his house has a hose and pump used to water the site.
These garden accessories can be used for hydrodynamic sewer cleaning at home. The main thing is to create a great pressure.
Sewer well cleaning
Cleaning sewer wells is a regular, mandatory step. It is advised to do it after the end of the winter period or every 6 months.
The technical capabilities of today make it possible to carry out this event in a private house quickly, without large financial costs.
The price for this is small when compared to the price that would have to be spent on repairing an emergency sewer pipeline.
On this moment use the following methods for cleaning wells:
- cleaning the well using a sludge pump;
- pumping out by vacuum;
- hydrodynamic view;
- washing with chemical reagents;
- thermal washing.
The required number of actions to clean the well is determined taking into account the local conditions. Sometimes they need to be done once a year, and in other cases they are resorted to two or three times a year.
Recommendations for frequent cleaning of wells in a private home are dictated by a practical approach.
The collected debris not only clogs up, but also significantly interferes with the normal functioning of the pipe network. With rare cleaning of garbage, all kinds of microbes accumulate in the well.
If they are not removed in time, then they provoke the appearance of mold and rot in the middle of the engineering structure. It also entails the emergence of all kinds of infections in a private house.
IMPORTANT! Often, due to a lack of funds, many ignore prevention, and as a result, emergencies arise. Over time, the pipeline loses its capacity, it may even become completely inoperative. For stable functioning sewer network in the house it is necessary to regularly clean the sewer wells.
Prevention
Cleaning the sewage system in a private home is a very time-consuming process, which can take a very long time. To prevent the occurrence of such situations in the future, you need to follow some tips:
- carefully monitor what goes down the drain;
- use gratings and special filters;
- regularly clean the sewer pipeline from plaque;
- for construction.
These recommendations will help protect the sewage system in a private house from frequent blockages. If you find that the water does not pass well, then you need to think about carrying out cleaning work.
This will prevent a plug from appearing that completely blocks the waste stream. Various remedies are used to solve this problem at home.
In the event of serious blockages, you should think about taking the help of professionals. Today, many companies provide sewage cleaning services in a private home.
Professionals will quickly fix problems of any complexity. This will save you time and energy. Of course, a certain price will have to be paid for such a service.
If you nevertheless decide to start cleaning the sewer pipes in a private house on your own, then you should start with the use of chemicals. They are highly effective and are ideal for home use.
Cables and other devices are also widely used. Cleaning at home is easy to do with your own hands.
Probably, everyone has had to deal with a situation where water stops leaving the sink or toilet. This indicates that a blockage has formed in the sewer pipes. In order to quickly solve this problem, special means for cleaning pipes are used. There are many such tools. You can buy a ready-made composition that can be easily purchased in any department of household goods, or you can use simple folk remedies from pipe clogging. Consider how to choose such funds.
If there is a sewage system in the house, the possibility of blockages cannot be excluded. Of course, if the rules for using the sewage system are observed, the likelihood of blockages is reduced, but the problem can also arise for super-neat owners.
It is better to start dealing with blockages by using preventive measures, avoiding a situation when the water completely stops leaving. The most convenient way is to use chemical cleaning methods, using specially formulated tools for cleaning pipe blockages.
About blockages in pipes
If the sewage system is old, then the best way to deal with blockages is to completely replace them. Over decades of use metal pipes filled with sediment and rust, the passage of the pipe is significantly narrowed, therefore the sewage system is often clogged, and any, even the most effective remedy, will only give a temporary result.
If possible, it is worth replacing old pipes with modern plastic sewers. Polymer pipes have a smoother inner surface, therefore, subject to the rules for using the sewage system, you will have to face the problem of a clogged pipeline much less often.
If at the moment such repairs are not planned, you need to carefully monitor the condition of the pipes. It is better to take action beforehand than to try to clean a completely clogged pipe later. It is quite simple to do this, you need to observe how quickly water leaves the plumbing fixtures.
Advice! With completely clean sewer pipes, it takes no more than 4-5 minutes to release a full bath of water. If the time for the water to drain from the bath is much longer than the specified value, then most likely the pipeline has already been clogged.
What are the remedies for blockages?
Among the whole variety of blockage remedies with which you can clean domestic sewerage, it is necessary to distinguish two groups:
- "Home" remedies, they are used if the blockage is insignificant or for prevention;
- Ready-made preparations of industrial production.
Home remedies
The simplest home remedy is boiling water. Hot water dissolves fat deposits quite well, so rinsing with boiling water is especially useful for washing in the kitchen, it is there that pipes are most often clogged. However, this method should be attributed to preventive measures, it will not cope with a strong blockage.
A simple remedy for blockages in pipes, consisting of soda and vinegar, helps a lot. This cleaner can be found in any kitchen, so it is often used at home. Let's figure out how to use baking soda and vinegar to remove blockages. Cleaning technology:
- A glass of baking soda is carefully poured into the drain of the plumbing fixture;
- Then a glass of ordinary table vinegar (not essence) is poured there. At this stage, a violent chemical reaction will begin in the drain with the release of foam, which will come out of the drain hole.
- Half an hour after pouring the vinegar, you should rinse the system well, it is better to rinse with hot water, that is, you just need to open the hot water supply tap and direct the stream into the drain hole.
Advice! Before using boiling water for flushing the drain, make sure that the siphon and sewer pipes able to withstand impact high temperatures... For example, if the sewage system in the house is collected from PVC pipes, then pouring boiling water into the pipes is not worth it.
Industrial drugs
On the shelves of the household departments, you can find a wide variety of products designed to eliminate blockages. They can be imported and domestic, expensive and cheap. Means also differ in consistency. The pipe cleaner can be presented as:
- Powder. Powdered pipe cleaners are sold in sachets. It's easy to use them. You just need to pour the powder into the drain hole and then pour some water (according to the instructions).
- Gel. Such funds are considered the most economical. The gel, due to its thick form, spreads well over the entire surface of the pipe, dissolving dirt.
- Liquids. Typically, this option is classified as an emergency. You will have to use the entire volume of liquid at once, but it is the action of a large volume of solvent at once that helps to cope with a serious blockage.
When choosing a tool, you should carefully read the instructions, this will help you choose the best tool for each specific case. In addition to universal cleaning products, you can also find special preparations.
For example, to remove grease plugs (ideal for cleaning pipes in the kitchen) or to dissolve hair (this product is better for unclogging pipes in the bathroom).
You should also pay attention to which pipes the blockage agent is intended for. For example, if it is clogged plastic sewer, then you need a tool that is approved for use in plastic pipes... Please note that the use of drugs that effectively remove blockages in cast iron sewers may not be safe for plastic pipes.
Most popular remedies
Consider the most popular remedies that can be used to combat blockages.
Mole
The Mole remedy is well known and in demand by consumers. Available in powder, gel and liquid form. As part of the preparation:
- Alkaline additives;
- Inorganic acids;
- Nonionic surfactants;
- Sodium hypochlorite.
The Mole remedy is universal, with its help you can get rid of fatty deposits, remnants of collagen fibers (hair, fish scales, etc.). Using the product helps to get rid of the unpleasant odor and disinfect the pipe walls. The advantages of the tool include its low cost.
Tiret
Polish-made product suitable for all types of pipes. It is produced in the form of a gel, you can purchase three types of the drug:
- Turbo;
- Prophylactic;
- Professional.
The composition of the funds is almost the same, the difference lies in the concentration of active additives. The product has good efficiency, is safe for pipes, and is easy to use.
Mister Muscle
The tool is presented in different versions. You can purchase a powder or gel. In addition, Mister Muscle offers both general purpose products and specialized preparations.
For example, drugs that quickly dissolve hair or body fat. All Mr. Muscle preparations include disinfectant additives that help to fight the growth of bacteria in the pipes.
How do I use cleaning products?
Using any remedy for pipe blockages, it is worth adhering to certain rules:
- Any preparation contains corrosive substances, therefore protective gloves should be worn before use.
Advice! You should be especially careful with the funds, the name of which contains the words "Active", "Professional", etc. In such funds, the concentration of active substances is increased.
- Before using the product, it is important to carefully study the instructions and not deviate from the recommendations given in it. Failure to comply with the instructions can lead to the fact that corrosive substances not only dissolve the dirt, but also damage the pipes themselves. To avoid the need for emergency repairs, do not exceed the holding time recommended by the manufacturer. Rinse off the product thoroughly with plenty of water.
Using special means for cleaning pipes, you can remove the resulting blockages in the sewage system. You just need to choose the right product and use it in accordance with the instructions.
