You decided to make repairs in the toilet with your own hands. Naturally, you dream that in the end everything will look beautiful and aesthetically pleasing, and also practical and functional.
The first thing that catches your eye in the toilet is a lot of various kinds of communications (hot and cold water risers, wiring, sewage). All this "splendor" I want to hide from the eyes, while not losing the volume of the already tiny room.
Nothing is impossible, even if you do not resort to the help of specialists, but do it yourself. Don't worry if you are not knowledgeable in this area. We will be happy to help you get them. It is important that all pipes and assemblies are in perfect condition or replaced with new ones to avoid possible leaks.
Types of closing devices
There are only two ways to hide pipes in the toilet room with your own hands.
First
Install additional structures, which are subdivided into the following forms:
- False - wall (mounted in toilet rooms with a relatively large area). It is usually placed behind the toilet. Thus, it closes the sewer pipe both in the corner and below. And the space above the toilet is used as a cabinet.
- Oblique false wall (installed in small toilets). A feature is its location at an angle.The inner surface of the materials used should not come into contact with the pipes, and the front surface should not be narrower than the inspection hatch.
- Square box, differ in height:Floor to ceiling (usually used to hide risers);With the upper horizontal surface at different levels - multi-level. In finished form, they are used as additional shelves. Such a device not only saves space, but also makes it more functional.
Second
We hide pipes in the toilet using the strobing method.
In other words, we make recesses in the wall itself with a puncher and a drill. This is a very time consuming process, but it saves as much space as possible. There are certain parameters here that cannot be deviated from:
- Pipe diameter no more than 50 mm;
- Deepening in load-bearing wall no more than 15% of the total thickness;
- The technology will not allow you to hide the pipe and toilet riser;
- Installation of inspection hatches.
What materials can be used
It is not difficult to choose what you need to install the box. There is a huge variety now finishing materials for every taste and wallet. It remains to decide how to hide the pipes in the toilet, using the most reliable and high-quality one.
We present to your attention the most modern and budgetary ones:
- Plastic panels.
- Their advantages:
- Do not need additional finishing;
- Absolutely not affected by moisture (but require constant care, they need to be wiped dry periodically);
- Easy to attach to the frame;
- The most optimal price-quality ratio.
There is also a very significant drawback - low strength. Be careful during installation and operation.
HDF laminated boards (high strength boards):
- Moisture resistant;
- Resistant to various kinds of damage;
- Long service life.
The only thing is that you cannot decorate them with tiles.
Is it possible to hide pipes in the toilet room with drywall? Of course, but there is one significant nuance here - it must certainly be moisture resistant.
This material:
- Practical and easy to use (it is simply cut with a knife, self-tapping screws are easily screwed into it);
- Suitable for laying tiles;
- Does not swell;
- Easy to dry.
To prevent it from collapsing from the inside, seal all cracks hermetically.
Roller shutters have become one of the latest fashion trends in the installation of boxes. They not only hide the unsightly appearance of communications, but also:
- They allow you to save well on tiles (they completely cover the wall);
- Provide quick access in an emergency;
- They have sound insulation.
- Do not require the installation of inspection hatches.
You can hide not only the pipes in the toilet with roller shutters, but also isolate the water meters from prying eyes.
Box creation technology (example from drywall)
This is not to say that everything is simple, and no difficulties await you while creating such a masterpiece as a place for toilet communications. However, ingenuity and skillful hands may well cope with this. In installing such a structure with our own hands, we rely on the main stages:
Let's prepare the tool:
- Roulette;
- Screwdriver;
- Perforator;
- Self-tapping screws;
- Knife;
- Hammer;
- Dowel nails.
Let's take measurements.
It is necessary to measure the width, depth and length of the pipes installed in this room. We add 7 cm to the width.
On a note. You can see how to hide toilet pipes with your own hands using drywall in numerous photos on the Internet.
Then we do everything step by step:
- We collect the details. For internal fastening, a galvanized profile (UD 27) is suitable.
- We carefully connect the profile and the details with furniture or wood screws.
- Let's prepare a place for installation. We remove the debris, remove the rust and prime the pipes, if they are iron.
- We fix the profile (brand CD) to the walls or ceiling with a perforator and dowel nails in two planes. We make the distance between them 50-60 cm.
Important! Do-it-yourself box installation is done before finishing the ceiling and walls.
Finally, we fasten the finished box to the frame with self-tapping screws.
In the description, all the nuances are difficult to take into account. Therefore, on the topic of whether it is necessary to hide pipes in the toilet, we will present a video review, from which you will draw the correct conclusions.
Hiding the pipes: video instructions
If you do not dare to make such a structure yourself, do not be upset. Modern supermarkets offer ready-made items made of polystyrene and plastic. They are assembled according to the instructions easily and simply into a ready-made frame.
25 July, 2016
Specialization: Master in Internal and exterior decoration (plaster, putty, tile, drywall, lining, laminate and so on). In addition, plumbing, heating, electrical, conventional cladding and balcony extensions. That is, repairs in an apartment or house were done on a turnkey basis with all the necessary types of work.
There are three most effective options for decorating a pipe in the kitchen, bathroom or toilet - these are decoupage, strobes and making a box. And here there may already be a variety of methods that differ in technique and technology of execution. Let's try to figure it out and watch a visual video in this article.
Risers, sunbeds and heating - decoration
Method 1 - decoupage
Perhaps decoupage is the most in a simple way Scenery. Any teenager can develop his imagination here.
Decoupage possibilities:
- let's start with an explanation of the notation itself - découper is a verb and is translated from French as "cut something out";
- therefore, how to decorate a gas pipe in the kitchen, a riser in a toilet or bathroom, as well as heating loungers here comes down to decorating them with something;
- you can glue anything you want - metal, wood, various objects up to bottle caps;
- in addition, there is any type for this - you can apply any pattern or mix a pattern with inlay, and so on;
- you can still use climbing plants - let them be alive or artificial, the main thing is that you create the appearance of some kind of liana.
Method 2 - hide in the walls
In the photo - pipes for water supply
I can say from personal experience that the most the best way decorating any pipeline, this is its complete absence, that is, the hiding of pipes in the floor, wall or ceiling. However, the embedding of communications in plaster or masonry is a more laborious process.
The pipe is laid in a groove, and then plastered. The depth of the laying depends on the diameter - the larger the cross-section, the deeper you will have to cut the channel, in addition, you still need to take into account the fastening methods, which can be different and take up different space.
It is quite difficult to do this work, and most of the problem is not physical labor, but dust, because you will need to cut the walls with a grinder. As a rule, two lines of the required depth are made, and then the remaining middle strip is selected with a perforator, a conventional chisel in the impact mode.
You won't need any special instructions, but you will have to swallow dust, which is very inconvenient, especially when there are pieces of furniture nearby, and indeed, if the repair was not planned.
In order to cut mineral materials such as bricks, concrete, plaster, you will need a diamond-coated disc. There are several options here, but, again, based on personal experience, it is best to do this not with corundum, but with diamond-coated steel discs. Their price is slightly higher, but the effect is excellent.
Method 3 - box or false wall
Frame for the formation of false walls: 1 - wooden slats; 2 - water pipes; 3 - sewer riser; 4 - water meter
Another way to decorate pipes in a bathroom, toilet, kitchen is to equip a false wall or drywall box, plastic panels and other finishing materials that are mounted on a frame or lathing. The point here is to cover the pipeline with a lining in any position - horizontal or vertical.
It is also important here that you still have access to shut-off valves and to water appliances - hot and / or cold water meter.
Now let's figure out more specifically how to decorate heating, water supply or sewage pipes, if you do not install them yourself, but they already exist in your apartment. That is, here you just get out of the situation, adjusting to the existing on this moment situations.
If, for example, you just need to close the risers of the water supply and / or sewage system in the toilet, then here you will need a crate for a false wall made of plasterboard or under any doors.
Such a frame can be made either from metal profiles that are used for drywall (CD, UD, CW, UW) or from wooden slats, for example, 50 × 50 mm. Here it is not the price of the material that matters, but how convenient it will be for you to mount them.
Personally, I prefer wood in such cases - it is much easier to attach it to (no brackets are needed). In the schematic above, you can see the bars are bolted around the perimeter. The lintels were installed after 40-50 cm, but at the same time the hatch zone was strengthened for access to the stop valves and the water meter.
Installation will look a little different, how to decorate pipes in a toilet, bathroom or kitchen, if you need to make a box. By the way, it can be both vertical and horizontal. The difference is that the structure is external.
That is, the frame profiles are attached not only to the wall, but also at a distance from it, using jumpers and brackets. Perforated metal hangers (Pashki) are usually used here as consoles, which are easily mounted to any rigid base with self-tapping screws and dowels.
The principle of fastening drywall to the frame for the box remains the same as for the general finish. The distance between the profiles should be no more than 50 cm, and the fixation points with self-tapping screws should be every 30-35 mm.
1.
2.
3.
4.
During the construction of a residential building or major repairs in an apartment, work always appears, one way or another related to the installation of sewer pipes. And often after installing them, the question arises of how to close sewer pipes in the toilet. How to hide a sewer pipe in a toilet will be discussed in this article.
Installation of sewer pipes in a box
The most reliable and high-quality method of masking sewer pipes is to lay them in a box. To do this, it is necessary to lay the pipes in an open way, and only then proceed to masking. To do this work, you need to create a frame made of wood or metal corners. All this structure will be attached to the wall with screws, and the connection of the box elements themselves will be made with self-tapping screws (read: "").If necessary, you can close the sewer pipe a box made of a metal profile. This will require waterproof plywood or plastic panels, and the frame can be sheathed with plasterboard. In any case, no matter what material the box for the sewer pipe is made of, it must be made removable so that at any time you can get access to the sewer pipes.
Before you close the sewer pipes in the toilet, you need to prepare the tools.
For work you will need:
- building level;
- roulette;
- grinder with a disc for metal or wood (depending on the material);
- screwdriver.
Laying sewer pipes into the wall
Before you hide the sewer pipes in the bathroom, installed in the wall, you need to make the appropriate grooves in them. To do this, you need to use a grinder equipped with a special disc.
- With a frame lined with any suitable material and veneered with ceramics.
- By covering the pipes with thermal material.
- Using roller shutters.
When assembling the structure in the kitchen, it is better not to hide it directly into the wall. If this option is the most suitable, then you will have to arm yourself with a puncher. To close the sewer pipes in the kitchen, special sleeves or plastic wrap combined with plastic panels are well suited. Today, shops abound in such materials, and they can be matched even in color and aesthetic qualities, not to mention design. The creation of a structure using plastic panels is also beneficial in that they can be disassembled almost instantly. In order to close the water meter, it is enough to install a homemade hatch.
Good and effective method camouflage of the sewer is the use of roller shutters. As a rule, such devices are supplied with detailed instructions, which will facilitate the installation and allow it to be completed as quickly as possible. Roller shutters are characterized by a long service life and good durability, so you will not have to change them in the near future.
Sometimes there are several non-standard situations, adjusting to which, you can hide the sewer pipes, practically without making additional efforts. For example, if the bathroom has a small area, then you can do a redevelopment, during which the sewer pipes will be hidden behind a special podium or hidden in a niche made of plasterboard. Such a kind of box for sewer pipes will perfectly fulfill its function.
How to close pipes with tiles in the toilet
You can hide sewer pipes behind a tile wall. To realize this idea, you need a moisture-resistant plasterboard partition, fixed to a metal frame. The partition wall must be strong enough to support the weight of the tiles glued to it. The dimensions of the resulting opening must be sufficient for repair work.
You can close this opening with a homemade hatch. It can be hidden, and then there will be no signs on the wall that there are pipes behind it. If you wish, you can make an overhead hatch: you will need metal to make it, and the door will be closed by means of a magnetic lock, which you can purchase or assemble yourself. Read also: "".
Features of hidden styling in the bathroom
Before you close the sewer pipes in the bathroom, you need to pick up everything necessary materials and tools. There are usually no problems with tools, but materials can ask a few unpleasant questions to a person who has no experience in construction.
We can immediately say that cast iron elements are not very expensive, but they will not last long either. Copper and steel structures are more expensive, and in this case the price is justified: the service life of structures made of these materials is quite high. Using plastic materials, it is necessary to take care of good thermal insulation so that sewage does not become a problem in the near future.
Whatever method is used to seal the sewer pipes in the toilet, you should use the following tips:
- It is best to make a structure from one piece.
- At the joints, it is better to use the same materials that connected the sewer pipes.
- Before masking the pipe in the wall, it must be insulated.
Conclusion
Masking the sewer pipes will make the aesthetic qualities of the room a little better. Before closing the sewer riser in the toilet, you need to make sure that good access will be provided to them in the future, otherwise the very first malfunction sewerage system will lead to the disassembly of the part of the wall or niche in which the pipeline passes.
