One of the most beautiful design options for plots are fences from wooden picket fence... Wood has always been one of the most attractive materials for construction - its noble colors and picturesque textures create a special warm atmosphere. Now in Moscow, such a design option as eco-design is very common: the predominance of natural materials in the interior and exterior of buildings. It organically fits into this design and wooden fence from a picket.
Modern technologies make the installation of a wooden fence simple and quick, as well as significantly increase the level of performance. The fence is beautiful and environmentally friendly, its installation is carried out in a matter of hours, and today's technologies make it possible to extend the life of the product without being puzzled by its additional processing.
Now everyone can buy a fence made of natural wood - the price per meter is quite acceptable, in addition, for a higher price, you can order very interesting models with different directions of the boards: horizontal, vertical, diagonal, combined.
Prices for fences made of wooden picket fence
Prices for a wooden picket fence range from about five hundred rubles for the material itself, but also include additional costs. If you order a turnkey fence, please note that the price per meter will take into account both the installation and the frame: pillars, logs, construction of brick or stone pillars, strip foundation... Together with painting or impregnation, prices can rise to 1000 rubles per m2 or more. The amount can be varied by individual calculation, saving on materials, foundation solidity, etc.
| Product name / height | h-1 m | h-1.5 m | h-1.8 m | h-2.0 m |
|---|---|---|---|---|
| Fence metal frame: posts 60x60, 2 logs 40x20 or board 100x40 |
350 RUR | |||
| Wooden picket fence (planed board 90x20mm) step 1cm | 600 RUR | 900 RUR | 1,080 RUR | 1 200 rub |
| Wooden picket fence (planed board 90x20) step 2 cm | 540 RUR | 810 RUR | 972 RUR | 1,080 RUR |
| Wooden picket fence (block house 95x20), step 1 cm | 571 RUR | 857 RUR | 1 028 RUR | 1 143 RUR |
| Wooden picket fence (planed board 90x20 or block house 95x20), checkerboard with a step of 5-6 cm |
890 rub | 1 335 RUB | 1 602 RUR | 1,780 RUR |
| Coating the picket fence with an antiseptic, pinotex, etc. | Consumption: 1 liter for 6-8 m2 | |||
| Installation of a fence (metal frame, logs and picket fence) | 400 - 450 RUB | |||
| Strip foundation | RUB 3,500 / RUB 3,900 (under brick pillars) | |||
How to buy a wooden picket fence
On our website you can buy a wooden picket fence of various modifications. These are fences with different pitch (distance between boards), as well as different types board processing. We offer hedges from ordinary planed boards, as well as from a block house - this is a popular method of processing when the inside remains flat and the outside is convex. A single or double version is possible, with the arrangement of the boards in a checkerboard pattern, as well as decorative options for the design of the fence with complex patterns. We can also calculate for you the cost of special impregnations, which will additionally protect the wood from discoloration over time, sunlight, moisture, decay, microorganisms and insects.
- Materials and tools
- Manufacturing technology
A wooden picket fence is one of the most popular types of fencing used to ennoble country cottage area... This is a very successful solution that allows you to decorate the courtyard, the main thing is to implement it correctly. Such a hedge has ensured itself immense popularity among summer residents and villagers due to a number of advantages, the main of which are the cheapness of the structure and its aesthetic data. She is preferred by connoisseurs of environmentally friendly materials, which, without a doubt, natural wood. In this article we will tell you how to make a picket fence with your own hands, and what you need for this.
Materials and tools
In principle, there is nothing special in the preparation of material and tools, since the installation of a wooden fence from a picket fence does not require special devices, of course, if we are not talking about combined structures consisting of several different types of materials, such as stone or brick. Bearing vertical and horizontal supports for the fence can be made both of wood and metal... So, to install a picket fence, we need:
- wooden beam 50x50 mm;
- wooden beam 20x40 mm;
- nails or screws;
- antiseptic;
- paint and varnish material.
We need a square bar to make vertical supports, and its length is planned in accordance with personal wishes, because everyone determines the height of the future fence for himself. Do not forget that each support is inserted into the ground by at least half a meter, so do not forget to add 50 cm to the desired height of the element for the fence.
A beam of a smaller section, in our case 20x40 mm, is intended for horizontal reinforcement of the spans of the picket, and its quantity will directly depend on the length of the fence being installed. Both nails and self-tapping screws are equally suitable as fasteners, although the second option is more preferable, because self-tapping screws do not loosen during the operation of the structure. Fasteners must be purchased from galvanized metal, which does not rust from atmospheric agents. As for antiseptics and paints and varnishes, there are a great many of them on the building materials market, you just need to choose products intended for outdoor use. From the tools you need to prepare a hacksaw or jigsaw. If you fix the planks with nails, then you will need a hammer, and it is better to fasten the screws with a screwdriver. We will also need a shovel for mounting the support posts.
Manufacturing technology
A step-by-step diagram for assembling a picket fence with your own hands, located in the next part of our article, will help you understand how to properly organize and complete the work from start to finish.
- At the first stage, it is necessary to properly prepare the wood, which means that all natural material you need to soak it several times with an antiseptic using a regular paint brush. Despite the fact that this process is quite laborious, it should not be ignored in any case. Such a measure will help to ensure the protection of the tree from the harmful effects of the environment and protect it from the decay process, respectively, extending the service life.
- Now you can start installing the supports, and we begin with the marking of the places for their installation. So, in places where the hedge changes direction (at the corners), install pegs and pull a strong rope between them. Next, we need to calculate the number of supports, for which we measure the distance between the pegs and divide it into equal intervals, the length of which does not exceed 2 meters. The resulting value will be the step between the bearing pillars, and at the place of their installation, it is necessary to dig holes, taking into account the fact that the support must go into the ground at least half a meter, necessarily below the freezing point. For a long and reliable service, the support structures are wedged with coarse gravel and compacted with earth... The laying of roofing material in the holes dug for the posts helps to increase the life of wooden supports, and the supports themselves are wrapped with the same roofing material in places where they are buried in the ground.
- In the third stage, transverse fence guides are usually mounted. The main thing is that each vein is located strictly horizontally, which must be controlled by the building level. As a rule, horizontal supports are mounted in two places (at the top and bottom of the fence), however, in the case of a high fence, an intermediate guide will have to be installed. The veins are fixed to the vertical supports of the picket fence with self-tapping screws or nailed.
- The final step is to install the wooden picket strips directly onto the fence. The most time-consuming but very simple process is that each fence is screwed vertically at regular intervals. For a more comfortable performance of the task, it is recommended to pull the thread on the lower edge of the pickets, which will provide one level of their placement.
In principle, at the fourth stage, the assembly process ends, the wooden picket fence is now ready for use, it remains to paint it in any chosen color, however, many craftsmen often additionally decorate the fence using simple techniques, providing it with a complete appearance. This mainly concerns the design of the upper edge of the pickets, which are given a certain shape.
Fence sections can be made in the form of a wave or arc, for which a marking is applied to the fence, according to which the trimming is carried out according to the template. Also, the pickets are sharpened on both sides to the shape of a sharpened pencil, which will additionally save the courtyard from unauthorized access. Often there are picket fences with carved planks, but here we are already talking about the whole art of carpentry, and such a work cannot be called simple. If desired, decoration options can be found on the network, where numerous photos of the most interesting carpentry solutions are collected, the main thing is that the homemade product pleases its owners and fits perfectly into the existing style of the local area.
Alternative to wooden poles
No matter how you prepare and process future supports, wood is wood, and in terms of durability it is significantly inferior to metal. If you want to wooden fence from a picket fence served for a long time, and its service life was not limited to 15 years, it is better to give preference metal base, which is mounted in the same way as described above, except for a few points. In this case, the posts are made from a metal pipe with a cross section of 40 mm, and they are fixed in the ground. concrete mortar. To ensure optimal adhesion of the carrier to the concrete, pieces of reinforcement or metal plates are welded to the bottom of the vertical supports.
Horizontal veins here are made from a metal pipe of a smaller diameter and welded between vertical supporting elements, also keeping an eye on the horizontal positioning using a level. Further, the process is performed as described above - each shtaketin is fixed on the previously built metal carcass special pointed self-tapping screws. Despite the fact that we will get a wooden picket fence, as in the previous version, in this case it is reinforced with a metal base. Even if the pickets become unusable over time, they can be replaced, while the supports remain the same, and this is a considerable cost savings.
The photo above clearly demonstrates that a wooden picket fence has a lot of options, and as a basis it can be used here brickwork, which in combination with natural wood gives an amazing effect. Also, instead of bricks, if finances allow, they often lay out spans of stone... Of course, for such a massive structure, it will be necessary to provide a full-fledged foundation, and this is already a much more laborious process. Now you know how to build a fence made of wooden pickets without the involvement of outside help, solely on your own, besides, you have the opportunity to choose various auxiliary materials for every taste and wallet.
Just half a century ago, a picket fence was the most common option not only for a summer cottage fence, but also for a residential building. This is a very simple and reliable fence, which, with the right approach to the issue of its manufacture, can also become a decoration of the local area. There are a lot of advantages of this type of fence, and it is for this reason that fences made of modern materials have not been able to displace it. We will talk about it in this article, in which, together with the site, we will deal with the question of how to make a fence from a wooden picket fence with our own hands?
Installation of a fence from a wooden picket fence photo
DIY wooden picket fence: material preparation
By and large, nothing really needs to be prepared here - a picket fence has a very simple design and you won't need a lot of different material to make it. Although you never know - picket fencers are different. They can be manufactured on different bases - both wood and metal can be used as horizontal bearing supports for picket fences. But let's not talk about it - the purpose of our article is to study the principle of making such a fence, and it is best to study this principle using the example of a wooden picket fence. So, you need it to make it.
And you can't do this without tools - at least you need a hand saw (preferably an electric jigsaw), a screwdriver (it's not so easy to tighten a large number of self-tapping screws by hand), a shovel for installing posts and, possibly, various small things that you may need, and maybe not. In general, you don't need much and, most importantly, nothing supernatural. Don't believe me? Then watch the video on how to build a wooden picket fence with your own hands and see for yourself.
DIY wooden picket fence: manufacturing technology
To make it easier to understand how to independently make a picket fence with your own hands, consider the process of assembling it point by point.
In principle, on this you can finish the work on the manufacture of a picket fence with your own hands, you just have to paint it. But you can not stop there - in addition, the fence can be decorated by giving its upper edge a certain shape. Spans can be drawn with an arc or a wave - all that is needed for this is to draw a radius and cut off the pickets according to the markings. Also, each of the pickets can be sharpened by cutting it off with a cone upwards - such a picket will be a more serious obstacle for intruders. In general, there are options for its design, and it would be at least imprudent not to use them to make a picket fence more attractive.
Installation of a wooden picket fence: metal ensures reliability
Whatever one may say, a tree is a tree, and someday the hour will come when it will rot. In general, after 10-15 years, such a fence will have to be changed. A more durable option for a fence of this type is a wooden picket fence on a metal base - it is made in almost the same way, with the exception of some points.
And then everything is the same - the pickets are screwed to the metal base of the fence by means of special self-tapping screws with a small drill at the end. At its cost, such a picket fence costs a little more, but overpaying, you can be sure of its reliability and durability. Even if the wood decays, the metal will remain alive, and you only need to replace the pickets to rebuild the fence.
How to make a fence from a picket fence with your own hands photo
Basically, that's it. The only thing that still remains to add at the end of the topic about a wooden picket fence with your own hands is that it can just as well be assembled in combination with a stone or. In such a situation, you will need to pour out a full-fledged concrete foundation for the fence, erect a low brick parapet and pillars on it, and then install wooden picket sections between the supports. In most cases, this approach to business is used in the construction of a capital fence, which can serve a very long time.
In Russia, wood has long been widely used as building material... It is used to build log houses, window frames, interior items, and kitchen utensils. This natural material allows you to create an atmosphere of inner comfort and coziness. A wooden picket fence is one of the most popular types of fences in suburban construction, which is simply irreplaceable when arranging a site in a rustic style. Such a fence, on the one hand, outlines the boundaries of the site for us, and on the other, its territory is not shaded.
Picket fences can be given any height, shape, color, and even clearance distance, thanks to which they acquire an original look and complement the design with their appearance suburban area.
A fence made of a wooden picket fence is used as a reliable fence for a personal plot, an element of territory zoning, decorative framing of beds and flower beds
Stems with flowers, filling the gaps in the gaps between the vertical strips, give the fence a more attractive look
The unchanging popularity of this type of fencing is explained by a number of its parameters and properties, the main ones being:
- Versatility. Wooden fences fit perfectly into any terrain. They go well with any other foundations, organically fit into an interior made of stone or brick, concrete or metal.
- Ease of installation. The installation of a fence made of a picket fence can be done independently by any summer resident and owner country housewithout resorting to the services of professional craftsmen.
- Convenience of care. Fence maintenance consists only in timely painting of the surface and elimination of defects that may arise during operation as a result of mechanical stress and seasonal precipitation.
- Reliability. A tall wooden fence will not only act decorative element landscape design, but also reliable protection owners of the site.
One of the advantages of a picket fence in comparison with the traditional solid fence, is the possibility of planting plants right at its base.
Procurement of material for arranging the fence
To erect a picket fence you will need:
- Support pillars. They can be made from metal pipes or thick bars.
- Picket fences. Narrow slats are made from edged or planed boards.
- Veins. Cross bars, placed horizontally between the support posts, 2-2.5 meters long, are made of bars with a cross section of 40 mm.
When choosing a material to make a fence from a picket fence, you can go in two ways: buy a ready-made picket fence or make it yourself from boards. The first method saves time. The finished fence can be installed on the day of purchase. But a significant drawback may be low-quality raw wood, which serves as the basis for a picket fence, which, during operation, will "lead" the fence. Choosing the second way, the owner will need to make an effort to spend several days making all the elements of the fence. But as a result, he will have a picket fence that fully corresponds to his ideas and wishes.
If the material is not sufficiently dried, it is necessary to use special dryers for the forest, because under natural conditions drying can take several seasons
The wood drying service, as well as the cutting of crossbars and pickets, can be ordered at the place where wood products are made. When preparing the material yourself, you must carefully grind and sand all the tops.
Design options for the tops of a wooden picket fence
The lower part of the wooden support pillars must be coated with hot water. This will prevent wood rotting and extend the life of the structure.
Installation and assembly of the fence
Arrangement of a picket fence is carried out according to the same principle as the construction of other types of fences. First of all, the direction of the future fence is determined. It must be freed from weeds, bushes and tree branches that will interfere with construction. Then, on the cleared area, beacons are stretched and along the stretched cord they mark a place for the pillars. The distance between the posts should not exceed three meters. Otherwise, long spans between the supports can cause the crossbars to sag under the weight of the picket fences.
Support pillars can be installed directly into the ground, but to create a more durable structure, it is better to erect them using cement-sand mortar.
To install the posts, you will need to use a drill to dig a hole, the depth of which is determined by the height of the fence. On average, 1.3 m is sufficient
Install the columns on a 20 cm gravel pad, which prevents the support from being squeezed out when the ground freezes. The vertically fixed columns are covered with alternating layers of concrete and soil mortar.
Having completed the installation of the posts along the path of the fence, you can install veins between them. In principle, a fence can be installed in two ways: at first, the crossbars are first attached between the posts, and then a picket fence is nailed to them, and at the second, the spans are assembled separately and fixed to the supports already in blocks.
Protect from atmospheric phenomena and other negatively influencing factors.
It is necessary to seal up all cracks and chips with putty compounds, soak the picket fence with an antiseptic, and then cover it with varnish, stain or paint
Film-forming agents do not fit well on freshly planed boards and do not last long. To “roughen up” the wood surface, you can grind it with a medium-grained sandpaper.
Stain is an excellent preservative that protects wood from the development of microorganisms and mold
The varnish will keep moisture away. By using stain and clear varnish, you can also imitate different breeds wood.
A wooden picket fence will protect the territory of the suburban area and additionally decorate it. Wood is considered a relatively reliable and functional material for the manufacture of various kinds of fences. Such a picket fence, in addition to the protective function, will also perform decorative and aesthetic. Living far from the city means being close to nature, so fences made of natural materials will look the most harmonious. Such a fence will stand out qualitatively against the background of brick buildings.
Decorative picket fence
By functionality, a picket fence can be divided into two types:
- Decorative or garden fencing. These are fences 30-60 cm high, their task is to zone the territory within the site;
- Fencing structures are structures that are used to fence a site along the perimeter.
Decorative picket fence is an excellent design solution that can decorate any area. Due to its size, it will not particularly protect the territory, but will only outline it. The picket fence can be made of almost any type of wood, of various sizes and at different intervals. It can also be complemented with an interesting decorative design.
Picket fence
A low wooden picket fence will serve good option for zoning and decorating the front garden. Plants will harmoniously fill the gaps in the gaps between the vertical strips of the picket fence, giving it an attractive look. It will perform the protective function only conditionally, but it will add neatness and neatness to the site.
IMPORTANT! It is advisable to protect the front garden from the entire site, but so that to avoid darkening in the flower garden itself. For a front garden, a wooden picket fence painted in bright colors is well suited. If desired, you can additionally decorate the fence with climbing plants.
A wooden picket fence can serve as the main or additional element when decorating a front garden. If the fence will appear only as a background, then it is better to paint it in neutral tones so that it does not distract attention from the flower bed. It is quite "transparent" and will not hide the beauty of the plants; all the advantages of the flower arrangement in the front garden will be perfectly visible through it.
Carved picket fence
Even the most ordinary picket fence will look original and beautiful if additionally decorated with carvings.
Threading methods:
- The thread can be applied directly to the picket fence itself prior to installation. The most common are two types of carving: contour and geometric;
- The second option involves attaching ready-made threaded planks to the mounted structure. Thus, you can decorate a ready-made picket fence.
The most difficult to perform is the lace cut. Its essence lies in the fact that the pattern is cut according to a pattern on a wooden surface. A pear or ebony is ideal for this thread. The carved picket fence will become a real work of art. Wooden fence exposed to different weather conditions, therefore carved picket fence need to be treated with varnish or paint.
Materials for making a picket fence
Wooden picket fence is the most popular and inexpensive fence. Wood is an ecological natural material, easy to use. Wood waste is widely used for the production of picket fence. These can be larch, pine and other species. The wooden picket fence must be free from knots, chips, chipping or other imperfections. The demand for wooden picket fences remains high every season.
Before installation, the picket board must be impregnated with an antiseptic to prevent premature decay. The price of products from manufacturers is almost the same.
Wood-polymer composite
The tree, though good stuffbut not durable. The service life ranges from 8-10 years. A wooden picket fence is highly dependent on the characteristics of the soil and climate.
A better and more durable material is a wood-polymer composite. It is a material that combines the best properties of wood and plastic. The wood-polymer composite has higher performance than its individual components. A composite is obtained using a special technology for combining wood flour with a polymer binder.
$ How much is a wooden picket fence
Wooden picket fence from the manufacturer in the size of 25x50x1000 mm -2.5 UAH / piece, picket fence under the order, based on your measurements 2000 UAH / m3.
The price for 1 p.m. of a fence made of wood with a height of 2 m is 1000 UAH.
Semicircular picket fence (birch) intake section 2800x1440 mm 1053 UAH
Wide picket fence 14-18 UAH UAH / piece
How to make a wooden picket fence with your own hands
Wood is a material that lends itself well to processing, is convenient to work with, and has rich design possibilities. Installing a picket fence is not particularly difficult and does not require professional skills, so you can save a lot and install a picket fence yourself.
Work order:
- Installation and alignment load-bearing structures... As a rule, metal posts are used as load-bearing structures. In order for the picket fence to serve for a long time, it is necessary to take into account the condition of the soil optimally before installation. Heavy clay soil will worsen the fastening of the support pillars, it will simply "push" them out, which can lead to the fall of the fence;
If your site is exposed to strong winds, then opt for concrete support poles and sturdy trees for the fence. Be especially careful when pouring the foundation.
- Installation of crossbars. Usually the crossbars are attached in two horizontal lines, but if you wish, you can increase the number of crossbars, so the picket fence will turn out a little higher;
- Fastening the pickets to the transverse slats using self-tapping screws or nails. It can be done in two ways: either collect the spans separately and fix them to the supports already in blocks, or nail the picket fence to the crossbars;
- Painting the picket fence. Freshly planed boards must first be processed with sandpaper, and cracks and chips must be putty with wood putty. The topcoat can only be applied on a flat, dry wood surface. Coloring will further protect the fence from environmental influences and give the tree a beautiful shade. It is recommended to renew the paint as needed every 3-5 years, completely remove the old coating and apply a new one.
The picket fence should always be installed in good, dry weather. This will allow the fence to be better preserved for many years.
Wooden picket fence is one of the most common types of fences in suburban construction. It will harmoniously fit into the natural landscape of the entire site. A fence made of a wooden picket fence is used not only as a reliable fence of a suburban area, but also as an element of territory zoning, decorative design of flower beds and front gardens.
